Fundamentals of Physics "VECTORS"

40
C H A P T E R 3
Vectors
3-1 VECTORS AND THEIR COMPONENTS
3.01 Add vectors by drawing them in head-to-tail arrange-
ments, applying the commutative and associative laws.
3.02 Subtract a vector from a second one.
3.03 Calculate the components of a vector on a given coordi-
nate system, showing them in a drawing.
3.04 Given the components of a vector, draw the vector
and determine its magnitude and orientation.
3.05 Convert angle measures between degrees and radians.
● Scalars, such as temperature, have magnitude only. They
are specified by a number with a unit (10°C) and obey the
rules of arithmetic and ordinary algebra. Vectors, such as dis-
placement, have both magnitude and direction (5 m, north)
and obey the rules of vector algebra.
● Two vectors and may be added geometrically by draw-
ing them to a common scale and placing them head to tail.
The vector connecting the tail of the first to the head of the
second is the vector sum . To subtract from , reverse the
direction of to get $ ; then add $ to . Vector addition is
commutative and obeys the associative law.
a
:
b
:
b
:
b
:
a
:
b
:
s
:
b
:
a
:
● The (scalar) components and of any two-dimensional
vector along the coordinate axes are found by dropping
perpendicular lines from the ends of onto the coordinate
axes. The components are given by
ax " a cos u and ay " a sin u,
where u is the angle between the positive direction of the x
axis and the direction of . The algebraic sign of a component
indicates its direction along the associated axis. Given its
components, we can find the magnitude and orientation of
the vector with
and .
tan 1 "
ay
ax
a " 2a2
x # a2
y
a
:
a
:
a
:
a
:
ay
ax
What Is Physics?
Physics deals with a great many quantities that have both size and direction, and it
needs a special mathematical language—the language of vectors—to describe
those quantities. This language is also used in engineering, the other sciences, and
even in common speech. If you have ever given directions such as “Go five blocks
down this street and then hang a left,” you have used the language of vectors. In
fact, navigation of any sort is based on vectors, but physics and engineering also
need vectors in special ways to explain phenomena involving rotation and mag-
netic forces, which we get to in later chapters. In this chapter, we focus on the basic
language of vectors.
Vectors and Scalars
A particle moving along a straight line can move in only two directions. We can
take its motion to be positive in one of these directions and negative in the other.
For a particle moving in three dimensions, however, a plus sign or minus sign is no
longer enough to indicate a direction. Instead, we must use a vector.
Key Ideas
Learning Objectives
After reading this module, you should be able to . . .

3-1 VECTORS AND THEIR COMPONENTS 41
A vector has magnitude as well as direction, and vectors follow certain
(vector) rules of combination, which we examine in this chapter. A vector
quantity is a quantity that has both a magnitude and a direction and thus can be
represented with a vector. Some physical quantities that are vector quantities are
displacement, velocity, and acceleration.You will see many more throughout this
book, so learning the rules of vector combination now will help you greatly in
later chapters.
Not all physical quantities involve a direction.Temperature, pressure, energy,
mass, and time, for example, do not “point” in the spatial sense. We call such
quantities scalars, and we deal with them by the rules of ordinary algebra. A sin-
gle value, with a sign (as in a temperature of $40°F), specifies a scalar.
The simplest vector quantity is displacement, or change of position. A vec-
tor that represents a displacement is called, reasonably, a displacement vector.
(Similarly, we have velocity vectors and acceleration vectors.) If a particle changes
its position by moving from A to B in Fig. 3-1a, we say that it undergoes a displace-
ment from A to B, which we represent with an arrow pointing from A to B.The ar-
row specifies the vector graphically. To distinguish vector symbols from other
kinds of arrows in this book,we use the outline of a triangle as the arrowhead.
In Fig. 3-1a, the arrows from A to B, from A/ to B/, and from A2 to B2 have
the same magnitude and direction.Thus, they specify identical displacement vec-
tors and represent the same change of position for the particle. A vector can be
shifted without changing its value if its length and direction are not changed.
The displacement vector tells us nothing about the actual path that the parti-
cle takes. In Fig. 3-1b, for example, all three paths connecting points A and B cor-
respond to the same displacement vector, that of Fig. 3-1a. Displacement vectors
represent only the overall effect of the motion, not the motion itself.
Adding Vectors Geometrically
Suppose that, as in the vector diagram of Fig. 3-2a, a particle moves from A to B
and then later from B to C.We can represent its overall displacement (no matter
what its actual path) with two successive displacement vectors, AB and BC.
The net displacement of these two displacements is a single displacement from A
to C. We call AC the vector sum (or resultant) of the vectors AB and BC. This
sum is not the usual algebraic sum.
In Fig. 3-2b, we redraw the vectors of Fig. 3-2a and relabel them in the way
that we shall use from now on, namely, with an arrow over an italic symbol, as
in . If we want to indicate only the magnitude of the vector (a quantity that lacks
a sign or direction), we shall use the italic symbol, as in a, b, and s. (You can use
just a handwritten symbol.) A symbol with an overhead arrow always implies
both properties of a vector, magnitude and direction.
We can represent the relation among the three vectors in Fig. 3-2b with the
vector equation
(3-1)
which says that the vector is the vector sum of vectors and .The symbol # in
Eq. 3-1 and the words “sum” and “add” have different meanings for vectors than
they do in the usual algebra because they involve both magnitude and direction.
Figure 3-2 suggests a procedure for adding two-dimensional vectors and
geometrically. (1) On paper, sketch vector to some convenient scale and at the
proper angle. (2) Sketch vector to the same scale, with its tail at the head of vec-
tor , again at the proper angle. (3) The vector sum is the vector that extends
from the tail of to the head of .
Properties. Vector addition, defined in this way, has two important proper-
ties. First, the order of addition does not matter. Adding to gives the same
b
:
a
:
b
:
a
:
s
:
a
:
b
:
a
:
b
:
a
:
b
:
a
:
s
:
s
:
" a
:
# b
:
,
a
:
Figure 3-1 (a) All three arrows have the
same magnitude and direction and thus
represent the same displacement. (b) All
three paths connecting the two points cor-
respond to the same displacement vector.
(a)
A'
B'
A"
B"
A
B
A
B
(b)
Figure 3-2 (a) AC is the vector sum of the
vectors AB and BC. (b) The same vectors
relabeled.
A
C
B
(a)
Actual
path
Net displacement
is the vector sum
(b)
a
s
b
This is the
resulting vector,
from tail of a
to head of b.
To add a and b,
draw them
head to tail.

CHAPTER 3 VECTORS
42
result as adding to (Fig. 3-3); that is,
(commutative law). (3-2)
Second, when there are more than two vectors, we can group them in any order
as we add them. Thus, if we want to add vectors , , and , we can add and
first and then add their vector sum to . We can also add and first and then
add that sum to .We get the same result either way, as shown in Fig. 3-4.That is,
(associative law). (3-3)
(a
:
# b
:
) # c
:
" a
:
# (b
:
# c
:
)
a
:
c
:
b
:
c
:
b
:
a
:
c
:
b
:
a
:
a
:
# b
:
" b
:
# a
:
a
:
b
:
Figure 3-3 The two vectors and can be
added in either order; see Eq. 3-2.
b
:
a
:
a + b
b + a
Finish
Start
Vector sum
a
a
b
b
You get the same vector
result for either order of
adding vectors.
Figure 3-4 The three vectors , , and can be grouped in any way as they are added; see
Eq. 3-3.
c
:
b
:
a
:
b
+
c
a + b
a
a
c c
b
a + b
(
a
+
b
)
+
c
a
+
b
+
c
a
+
(
b
+
c
)
b
+
c
You get the same vector result for
any order of adding the vectors.
Figure 3-5 The vectors and have the
$b
:
b
:
b
–b
Figure 3-6 (a) Vectors , , and .
(b) To subtract vector from vector ,
add vector to vector .
a
:
$b
:
a
:
b
:
$b
:
b
:
a
:
d = a – b
(a)
(b)
Note head-to-tail
arrangement for
addition
a
a
b
–b
–b Checkpoint 1
The magnitudes of displacements and are 3 m and 4 m,respectively,and .
Considering various orientations of and , what are (a) the maximum possible
magnitude for and (b) the minimum possible magnitude?
c
:
b
:
a
:
c
:
" a
:
# b
:
b
:
a
:
The vector is a vector with the same magnitude as but the opposite
direction (see Fig. 3-5).Adding the two vectors in Fig. 3-5 would yield
Thus, adding has the effect of subtracting . We use this property to define
the difference between two vectors: let . Then
(vector subtraction); (3-4)
that is, we find the difference vector by adding the vector to the vector .
Figure 3-6 shows how this is done geometrically.
As in the usual algebra,we can move a term that includes a vector symbol from
one side of a vector equation to the other,but we must change its sign.For example,
if we are given Eq.3-4 and need to solve for ,we can rearrange the equation as
Remember that, although we have used displacement vectors here, the rules
for addition and subtraction hold for vectors of all kinds, whether they represent
velocities, accelerations, or any other vector quantity. However, we can add
only vectors of the same kind. For example, we can add two displacements, or two
velocities, but adding a displacement and a velocity makes no sense. In the arith-
metic of scalars, that would be like trying to add 21 s and 12 m.
d
:
# b
:
" a
:
or a
:
" d
:
# b
:
.
a
:
a
:
$b
:
d
:
d
:
" a
:
$ b
:
" a
:
# ($b
:
)
d
:
" a
:
$ b
:
b
:
$b
:
b
:
# ($b
:
) " 0.
b
:
$b
:
Components of Vectors
Adding vectors geometrically can be tedious. A neater and easier technique
involves algebra but requires that the vectors be placed on a rectangular coordi-
nate system.The x and y axes are usually drawn in the plane of the page, as shown
same magnitude and opposite directions.

in Fig. 3-7a. The z axis comes directly out of the page at the origin; we ignore it for
now and deal only with two-dimensional vectors.
A component of a vector is the projection of the vector on an axis. In
Fig. 3-7a, for example, ax is the component of vector on (or along) the x axis and
ay is the component along the y axis. To find the projection of a vector along an
axis, we draw perpendicular lines from the two ends of the vector to the axis, as
shown.The projection of a vector on an x axis is its x component, and similarly the
projection on the y axis is the y component. The process of finding the
components of a vector is called resolving the vector.
A component of a vector has the same direction (along an axis) as the vector.
In Fig. 3-7, ax and ay are both positive because extends in the positive direction
of both axes. (Note the small arrowheads on the components, to indicate their di-
rection.) If we were to reverse vector , then both components would be negative
and their arrowheads would point toward negative x and y. Resolving vector in
Fig. 3-8 yields a positive component bx and a negative component by.
In general, a vector has three components, although for the case of Fig. 3-7a
the component along the z axis is zero.As Figs. 3-7a and b show, if you shift a vec-
tor without changing its direction, its components do not change.
Finding the Components. We can find the components of in Fig. 3-7a geo-
metrically from the right triangle there:
ax " a cos u and ay " a sin u, (3-5)
where u is the angle that the vector makes with the positive direction of the
x axis, and a is the magnitude of . Figure 3-7c shows that and its x and y com-
ponents form a right triangle. It also shows how we can reconstruct a vector from
its components: we arrange those components head to tail. Then we complete a
right triangle with the vector forming the hypotenuse, from the tail of one com-
ponent to the head of the other component.
Once a vector has been resolved into its components along a set of axes, the
components themselves can be used in place of the vector. For example, in
Fig. 3-7a is given (completely determined) by a and u. It can also be given by its
components ax and ay. Both pairs of values contain the same information. If we
know a vector in component notation (ax and ay) and want it in magnitude-angle
notation (a and u), we can use the equations
and tan (3-6)
to transform it.
In the more general three-dimensional case, we need a magnitude and two
angles (say, a, u, and f) or three components (ax, ay, and az) to specify a vector.
1 "
ay
ax
a " 2a2
x # ay
2
a
:
a
:
a
:
a
:
a
:
b
:
a
:
a
:
a
:
Figure 3-8 The component of on the
x axis is positive, and that on the y axis is
negative.
b
:
O
y (m)
θ x(m)
bx = 7 m
b
y
=
–5
m
b
This is the x component
of the vector.
This is the y component
of the vector.
43
Figure 3-7 (a) The components ax and ay of
vector . (b) The components are unchanged if
the vector is shifted, as long as the magnitude
and orientation are maintained. (c) The com-
ponents form the legs of a right triangle whose
hypotenuse is the magnitude of the vector.
a
:
y
x
O ax
ay
θ θ
(a) (b)
y
x
O
ax
ay
a a
θ
(c)
ay
ax
a
This is the y component
of the vector.
This is the x component
of the vector.
The components
and the vector
form a right triangle.
Checkpoint 2
In the figure, which of the indicated methods for combining the x and y components of vector are proper to determine that vector?
a
:
y
x
ax
ay
(a)
a
y
x
ax
ay
(d)
a
y
x
ax
ay
(e)
a
x
ax
ay
y
( f )
a
y
x
ax
ay
(b)
a
y
x
ax
ay
(c)
a

CHAPTER 3 VECTORS
44
KEY IDEA
We are given the magnitude (215 km) and the angle (22° east
of due north) of a vector and need to find the components
of the vector.
Calculations: We draw an xy coordinate system with the
positive direction of x due east and that of y due north (Fig.
3-10). For convenience, the origin is placed at the airport.
(We don’t have to do this. We could shift and misalign the
coordinate system but, given a choice, why make the prob-
lem more difficult?) The airplane’s displacement points
from the origin to where the airplane is sighted.
To find the components of , we use Eq. 3-5 with u "
68° (" 90° $ 22°):
dx " d cos u " (215 km)(cos 68°)
" 81 km (Answer)
dy " d sin u " (215 km)(sin 68°)
" 199 km % 2.0 ' 102
km. (Answer)
Thus, the airplane is 81 km east and 2.0 ' 102
km north of
the airport.
d
:
d
:
Sample Problem 3.02 Finding components, airplane flight
A small airplane leaves an airport on an overcast day and is
later sighted 215 km away, in a direction making an angle of
22° east of due north. This means that the direction is not
due north (directly toward the north) but is rotated 22° to-
ward the east from due north. How far east and north is the
airplane from the airport when sighted?
Additional examples, video, and practice available at WileyPLUS
Figure 3-10 A plane takes off from an airport at the origin and is
later sighted at P.
2
1
5
k
m
100
y
x
200
0
0 100
22°
θ
Distance
(km)
Distance (km)
P
d
order, because their vector sum is the same for any order.
(Recall from Eq. 3-2 that vectors commute.) The order
shown in Fig. 3-9b is for the vector sum
Using the scale given in Fig. 3-9a, we measure the length d of
this vector sum, finding
d " 4.8 m. (Answer)
d
:
" b
:
# a
:
# ($c
:
).
Sample Problem 3.01 Adding vectors in a drawing, orienteering
In an orienteering class, you have the goal of moving as far
(straight-line distance) from base camp as possible by
making three straight-line moves. You may use the follow-
ing displacements in any order: (a) , 2.0 km due east
(directly toward the east); (b) , 2.0 km 30° north of east
(at an angle of 30° toward the north from due east);
(c) , 1.0 km due west. Alternatively, you may substitute
either for or for . What is the greatest distance
you can be from base camp at the end of the third displace-
ment? (We are not concerned about the direction.)
Reasoning: Using a convenient scale, we draw vectors ,
, , , and as in Fig. 3-9a. We then mentally slide the
vectors over the page, connecting three of them at a time
in head-to-tail arrangements to find their vector sum .
The tail of the first vector represents base camp. The head
of the third vector represents the point at which you stop.
The vector sum extends from the tail of the first vector
to the head of the third vector. Its magnitude d is your dis-
tance from base camp. Our goal here is to maximize that
base-camp distance.
We find that distance d is greatest for a head-to-tail
arrangement of vectors , , and . They can be in any
$c
:
b
:
a
:
d
:
d
:
$c
:
$b
:
c
:
b
:
a
:
c
:
$c
:
b
:
$b
:
c
:
b
:
a
:
Figure 3-9 (a) Displacement vectors; three are to be used. (b) Your
distance from base camp is greatest if you undergo
displacements , , and , in any order.
$c
:
b
:
a
:
30°
0 1
Scale of km
2
d = b + a – c
(a) (b)
a
a
c
b b
–b
–c
–c
This is the vector result
for adding those three
vectors in any order.

45
the x axis. If it is measured relative to some other direc-
tion, then the trig functions in Eq. 3-5 may have to be in-
terchanged and the ratio in Eq. 3-6 may have to be
inverted. A safer method is to convert the angle to one
measured from the positive direction of the x axis. In
WileyPLUS, the system expects you to report an angle of
direction like this (and positive if counterclockwise and
negative if clockwise).
Problem-Solving Tactics Angles, trig functions, and inverse trig functions
Tactic 1: Angles—Degrees and Radians Angles that are
measured relative to the positive direction of the x axis are
positive if they are measured in the counterclockwise direc-
tion and negative if measured clockwise. For example, 210°
and $150° are the same angle.
Angles may be measured in degrees or radians (rad).To
relate the two measures, recall that a full circle is 360° and
2p rad.To convert, say, 40° to radians, write
Tactic 2: Trig Functions You need to know the definitions
of the common trigonometric functions—sine, cosine, and
tangent—because they are part of the language of science
and engineering. They are given in Fig. 3-11 in a form that
does not depend on how the triangle is labeled.
You should also be able to sketch how the trig functions
vary with angle, as in Fig. 3-12, in order to be able to judge
whether a calculator result is reasonable. Even knowing
the signs of the functions in the various quadrants can be
of help.
Tactic 3: Inverse Trig Functions When the inverse trig
functions sin$1
, cos$1
, and tan$1
are taken on a calculator,
you must consider the reasonableness of the answer you
get, because there is usually another possible answer that
the calculator does not give. The range of operation for a
calculator in taking each inverse trig function is indicated
in Fig. 3-12. As an example, sin$1
0.5 has associated angles
of 30° (which is displayed by the calculator, since 30° falls
within its range of operation) and 150°. To see both values,
draw a horizontal line through 0.5 in Fig. 3-12a and note
where it cuts the sine curve. How do you distinguish a cor-
rect answer? It is the one that seems more reasonable for
the given situation.
Tactic 4: Measuring Vector Angles The equations for
cos u and sin u in Eq. 3-5 and for tan u in Eq. 3-6 are valid
only if the angle is measured from the positive direction of
403
2) rad
3603
" 0.70 rad.
Figure 3-11 A triangle used to define the trigonometric
functions. See also Appendix E.
θ
Hypotenuse
Leg adjacent to θ
Leg
opposite θ
sin θ
leg opposite θ
hypotenuse
=
cos θ
hypotenuse
=
leg adjacent to θ
tan θ =
leg adjacent to θ
leg opposite θ
Figure 3-12 Three useful curves to remember. A calculator’s range
of operation for taking inverse trig functions is indicated by the
darker portions of the colored curves.
90° 270°
–90°
+1
–1
IV I II III IV
Quadrants
(a)
0
sin
180° 360°
(b)
0
cos
90° 180° 270° 360°
–90°
+1
–1
(c)
90° 270°
–90°
+1
+2
–1
–2
tan
180° 360°
0

CHAPTER 3 VECTORS
46
3-2 UNIT VECTORS, ADDING VECTORS BY COMPONENTS
3.06 Convert a vector between magnitude-angle and unit-
vector notations.
3.07 Add and subtract vectors in magnitude-angle notation
and in unit-vector notation.
3.08 Identify that, for a given vector, rotating the coordinate
system about the origin can change the vector’s compo-
nents but not the vector itself.
● Unit vectors , , and have magnitudes of unity and are
directed in the positive directions of the x, y, and z axes,
respectively, in a right-handed coordinate system. We can
write a vector in terms of unit vectors as
" axî # ayĵ # azk̂,
a
:
a
:
k̂
ĵ
î in which , , and are the vector components of and
ax, ay, and az are its scalar components.
● To add vectors in component form, we use the rules
rx " ax # bx ry " ay # by rz " az # bz.
Here and are the vectors to be added, and is the vector
sum. Note that we add components axis by axis.
r
:
b
:
a
:
a
:
azk̂
ayĵ
axî
Learning Objectives
Key Ideas
ˆ
ˆ
y
x
O axi
ay j
θ
(a)
a
bxî
ˆ
θ O x
y
by j
(b)
b
This is the x vector
component.
This is the y vector component.
Figure 3-14 (a) The vector components
of vector . (b) The vector components
of vector .
b
:
a
:
Unit Vectors
A unit vector is a vector that has a magnitude of exactly 1 and points in a particu-
lar direction. It lacks both dimension and unit. Its sole purpose is to point—that
is, to specify a direction.The unit vectors in the positive directions of the x, y, and
z axes are labeled , , and , where the hat is used instead of an overhead arrow
as for other vectors (Fig. 3-13).The arrangement of axes in Fig. 3-13 is said to be a
right-handed coordinate system. The system remains right-handed if it is rotated
rigidly.We use such coordinate systems exclusively in this book.
Unit vectors are very useful for expressing other vectors; for example, we can
express and of Figs. 3-7 and 3-8 as
(3-7)
and . (3-8)
These two equations are illustrated in Fig. 3-14.The quantities ax and ay are vec-
tors, called the vector components of .The quantities ax and ay are scalars, called
the scalar components of (or, as before, simply its components).
a
:
a
:
ĵ
î
b
:
" bxî # by ĵ
a
:
" axî # ayĵ
b
:
a
:
ˆ
k̂
ĵ
î
Adding Vectors by Components
We can add vectors geometrically on a sketch or directly on a vector-capable
calculator.A third way is to combine their components axis by axis.
Figure 3.13 Unit vectors î, , and define the
directions of a right-handed coordinate
system.
k̂
ĵ
y
x
z
ĵ
î
k̂
The unit vectors point
along axes.

47
To start, consider the statement
, (3-9)
which says that the vector is the same as the vector . Thus, each
component of must be the same as the corresponding component of :
rx " ax # bx (3-10)
ry " ay # by (3-11)
rz " az # bz. (3-12)
In other words, two vectors must be equal if their corresponding components are
equal. Equations 3-9 to 3-12 tell us that to add vectors and , we must (1) re-
solve the vectors into their scalar components; (2) combine these scalar compo-
nents, axis by axis, to get the components of the sum ; and (3) combine
the components of to get itself. We have a choice in step 3. We can express
in unit-vector notation or in magnitude-angle notation.
This procedure for adding vectors by components also applies to vector
subtractions. Recall that a subtraction such as can be rewritten as an
addition .To subtract, we add and by components, to get
dx " ax $ bx, dy " ay $ by, and dz " az $ bz,
where . (3-13)
d
:
" dxî # dyĵ # dzk̂
$b
:
a
:
d
:
" a
:
# ($b
:
)
d
:
" a
:
$ b
:
r
:
r
:
r
:
r
:
b
:
a
:
(a
:
# b
:
)
r
:
(a
:
# b
:
)
r
:
r
:
" a
:
# b
:
Checkpoint 3
(a) In the figure here, what are the signs of the x
components of and ? (b) What are the signs of
the y components of and ? (c) What are the
d2
:
d1
:
d2
:
d1
:
y
x
d2
d1
Vectors and the Laws of Physics
So far, in every figure that includes a coordinate system, the x and y axes are par-
allel to the edges of the book page. Thus, when a vector is included, its compo-
nents ax and ay are also parallel to the edges (as in Fig. 3-15a).The only reason for
that orientation of the axes is that it looks “proper”; there is no deeper reason.
We could, instead, rotate the axes (but not the vector ) through an angle f as in
a
:
a
:
Figure 3-15 (a) The vector and its
components. (b) The same vector, with the
axes of the coordinate system rotated
through an angle f.
a
:
a
y
x
ax
ay
θ
(a)
O
a
y
x
a'
x
x'
(b)
θ
a'
y
φ
O
y'
'
Rotating the axes
changes the components
but not the vector.
Fig. 3-15b, in which case the components would have new values, call them a/x and
a/y. Since there are an infinite number of choices of f, there are an infinite num-
ber of different pairs of components for .
Which then is the “right” pair of components? The answer is that they are all
equally valid because each pair (with its axes) just gives us a different way of de-
scribing the same vector ; all produce the same magnitude and direction for the
vector. In Fig. 3-15 we have
(3-14)
and
u " u/ # f. (3-15)
The point is that we have great freedom in choosing a coordinate system, be-
cause the relations among vectors do not depend on the location of the origin or
on the orientation of the axes.This is also true of the relations of physics; they are
all independent of the choice of coordinate system.Add to that the simplicity and
richness of the language of vectors and you can see why the laws of physics are
almost always presented in that language: one equation, like Eq. 3-9, can repre-
sent three (or even more) relations, like Eqs. 3-10, 3-11, and 3-12.
a " 2a2
x # a2
y " 2a/2
x # a/2
y
a
:
a
:
signs of the x and y components of # ?
d2
:
d1
:

CHAPTER 3 VECTORS
48
Calculations: To evaluate Eqs. 3-16 and 3-17, we find the x and
y components of each displacement. As an example, the com-
ponents for the first displacement are shown in Fig. 3-16c. We
draw similar diagrams for the other two displacements and
then we apply the x part of Eq. 3-5 to each displacement, using
angles relative to the positive direction of the x axis:
dlx " (6.00 m) cos 40° " 4.60 m
d2x " (8.00 m) cos ($60°) " 4.00 m
d3x " (5.00 m) cos 0° " 5.00 m.
Equation 3-16 then gives us
dnet,x " #4.60 m # 4.00 m # 5.00 m
" 13.60 m.
Similarly, to evaluate Eq. 3-17, we apply the y part of Eq. 3-5
to each displacement:
dly " (6.00 m) sin 40° = 3.86 m
d2y " (8.00 m) sin ($60°) = $6.93 m
d3y " (5.00 m) sin 0° " 0 m.
Equation 3-17 then gives us
dnet,y " #3.86 m $ 6.93 m # 0 m
" $3.07 m.
Next we use these components of net to construct the vec-
tor as shown in Fig. 3-16d: the components are in a head-to-
tail arrangement and form the legs of a right triangle, and
d
:
Sample Problem 3.03 Searching through a hedge maze
A hedge maze is a maze formed by tall rows of hedge.
After entering, you search for the center point and then
for the exit. Figure 3-16a shows the entrance to such a
maze and the first two choices we make at the junctions
we encounter in moving from point i to point c. We un-
dergo three displacements as indicated in the overhead
view of Fig. 3-16b:
d1 " 6.00 m 11 " 40°
d2 " 8.00 m 12 " 30°
d3 " 5.00 m 13 " 0°,
where the last segment is parallel to the superimposed
x axis. When we reach point c, what are the magnitude and
angle of our net displacement net from point i?
KEY IDEAS
(1) To find the net displacement net, we need to sum the
three individual displacement vectors:
net " 1 # 2 # 3.
(2) To do this, we first evaluate this sum for the x compo-
nents alone,
dnet,x " dlx # d2x # d3x, (3-16)
and then the y components alone,
dnet,y " d1y # d2y # d3y. (3-17)
(3) Finally, we construct net from its x and y components.
d
:
d
:
d
:
d
:
d
:
d
:
d
:
Figure 3-16 (a) Three displacements through a hedge maze. (b) The displacement vectors. (c) The first displacement vector and its
components. (d) The net displacement vector and its components.
(a)
y
x
d1y
d1x
(c)
a
b
c
i (b)
y
x
a
b
c
i
u1
u2
y
x
dnet,x
dnet,y
c
(d)
d1
d2
d3
d1
i
dnet
Three
vectors
First
vector
Net
vector

49
the vector forms the hypotenuse.We find the magnitude and
angle of net with Eq. 3-6. The magnitude is
dnet " (3-18)
" " 13.9 m. (Answer)
To find the angle (measured from the positive direction of x),
we take an inverse tangent:
1 " tan$1
(3-19)
" tan$1
" $12.7°. (Answer)
The angle is negative because it is measured clockwise from
positive x.We must always be alert when we take an inverse
#–3.07 m
13.60 m $
#dnet,y
dnet,x
$
2(13.60 m)2
# ($3.07 m)2
2d2
net,x # d2
net,y
d
:
tangent on a calculator. The answer it displays is mathe-
matically correct but it may not be the correct answer for
the physical situation. In those cases, we have to add 180°
to the displayed answer, to reverse the vector. To check,
we always need to draw the vector and its components as
we did in Fig. 3-16d. In our physical situation, the figure
shows us that 1 " $12.7° is a reasonable answer, whereas
$12.7° # 180° " 167° is clearly not.
We can see all this on the graph of tangent versus angle
in Fig. 3-12c. In our maze problem, the argument of the in-
verse tangent is $3.07/13.60, or $0.226. On the graph draw
a horizontal line through that value on the vertical axis.The
line cuts through the darker plotted branch at $12.7° and
also through the lighter branch at 167°. The first cut is what
a calculator displays.
KEY IDEA
We can add the three vectors by components, axis by axis,
and then combine the components to write the vector
sum .
Calculations: For the x axis, we add the x components of
and to get the x component of the vector sum :
rx " ax # bx # cx
" 4.2 m $ 1.6 m # 0 " 2.6 m.
Similarly, for the y axis,
ry " ay # by # cy
" $1.5 m # 2.9 m $ 3.7 m " $2.3 m.
We then combine these components of to write the vector
in unit-vector notation:
(Answer)
where (2.6 m)î is the vector component of along the x axis
and (2.3 m)ĵ is that along the y axis. Figure 3-17b shows
one way to arrange these vector components to form .
(Can you sketch the other way?)
We can also answer the question by giving the magnitude
and an angle for .From Eq.3-6,the magnitude is
(Answer)
and the angle (measured from the #x direction) is
(Answer)
where the minus sign means clockwise.
1 " tan$1
#$2.3 m
2.6 m $" $413,
r " 2(2.6 m)2
# ($2.3 m)2
% 3.5 m
r
:
r
:
$
r
:
r
:
" (2.6 m)î $ (2.3 m)ĵ,
r
:
r
:
c
:
,
b
:
,
a
:
,
r
:
Sample Problem 3.04 Adding vectors, unit-vector components
Figure 3-17a shows the following three vectors:
and
What is their vector sum which is also shown?
r
:
c
:
" ($3.7 m)ĵ.
b
:
" ($1.6 m)î # (2.9 m)ĵ,
a
:
" (4.2 m)î $ (1.5 m)ĵ,
x
y
–1 3 4
–2
–3 2
–3
–2
–1
1
x
y
–1 3 4
–2
–3 2
–3
–2
–1
2
3
1
1
(a)
2.6i
(b)
r
r
a
c
b
ˆ
–2.3ĵ
To add these vectors,
find their net x component
and their net y component.
Then arrange the net
components head to tail.
This is the result of the addition.
Figure 3-17 Vector is the vector sum of the other three vectors.
r
:

CHAPTER 3 VECTORS
50
Multiplying Vectors*
There are three ways in which vectors can be multiplied, but none is exactly like
the usual algebraic multiplication. As you read this material, keep in mind that a
vector-capable calculator will help you multiply vectors only if you understand
the basic rules of that multiplication.
Multiplying a Vector by a Scalar
If we multiply a vector by a scalar s, we get a new vector. Its magnitude is
the product of the magnitude of and the absolute value of s. Its direction is the
direction of if s is positive but the opposite direction if s is negative.To divide
by s, we multiply by 1/s.
Multiplying a Vector by a Vector
There are two ways to multiply a vector by a vector: one way produces a scalar
(called the scalar product), and the other produces a new vector (called the vector
product). (Students commonly confuse the two ways.)
a
:
a
:
a
:
a
:
a
:
Key Ideas
● The vector (or cross) product of two vectors and is
written ' and is a vector whose magnitude c is given by
c " ab sin 4,
in which 4 is the smaller of the angles between the directions
of and . The direction of is perpendicular to the plane
defined by and and is given by a right-hand rule, as shown
in Fig. 3-19. Note that ' " $( ' ). In unit-vector
notation,
' " '
which we may expand with the distributive law.
● In nested products, where one product is buried inside an-
other, follow the normal algebraic procedure by starting with
the innermost product and working outward.
(bxî # byĵ # bzk̂),
(axî # ayĵ # azk̂)
b
:
a
:
a
:
b
:
b
:
a
:
b
:
a
:
c
:
b
:
a
:
c
:
b
:
a
:
b
:
a
:
*This material will not be employed until later (Chapter 7 for scalar products and Chapter 11 for vec-
tor products), and so your instructor may wish to postpone it.
● The product of a scalar s and a vector is a new vector
whose magnitude is and whose direction is the same as
that of if s is positive, and opposite that of if s is negative.
To divide by s, multiply by 1/s.
● The scalar (or dot) product of two vectors and is writ-
ten " and is the scalar quantity given by
" " ab cos 4,
in which 4 is the angle between the directions of and .
A scalar product is the product of the magnitude of one vec-
tor and the scalar component of the second vector along the
direction of the first vector. In unit-vector notation,
" " !
which may be expanded according to the distributive law.
Note that " " " .
a
:
b
:
b
:
a
:
(bxî # byĵ # bzk̂),
(axî # ayĵ # azk̂)
b
:
a
:
b
:
a
:
b
:
a
:
b
:
a
:
b
:
a
:
v
:
v
:
v
:
v
:
sv
v
:
3-3 MULTIPLYING VECTORS
Learning Objectives
3.13 Given two vectors, use a dot product to find how much
of one vector lies along the other vector.
3.14 Find the cross product of two vectors in magnitude-
angle and unit-vector notations.
3.15 Use the right-hand rule to find the direction of the vector
that results from a cross product.
3.16 In nested products, where one product is buried inside
another, follow the normal algebraic procedure by starting
with the innermost product and working outward.
3.09 Multiply vectors by scalars.
3.10 Identify that multiplying a vector by a scalar gives a vec-
tor, taking the dot (or scalar) product of two vectors gives a
scalar, and taking the cross (or vector) product gives a new
vector that is perpendicular to the original two.
3.11 Find the dot product of two vectors in magnitude-angle
notation and in unit-vector notation.
3.12 Find the angle between two vectors by taking their dot prod-
uct in both magnitude-angle notation and unit-vector notation.

If the angle between two vectors is 0°, the component of one vector along the
other is maximum, and so also is the dot product of the vectors. If, instead, is 90°,
the component of one vector along the other is zero, and so is the dot product.
4
4
The Scalar Product
The scalar product of the vectors and in Fig. 3-18a is written as and
defined to be
" ab cos f, (3-20)
where a is the magnitude of , b is the magnitude of , and is the angle between
and (or, more properly, between the directions of and ).There are actually
two such angles: and 360° . Either can be used in Eq. 3-20, because their
cosines are the same.
Note that there are only scalars on the right side of Eq. 3-20 (including the
value of cos ).Thus on the left side represents a scalar quantity. Because of
the notation, is also known as the dot product and is spoken as “a dot b.”
A dot product can be regarded as the product of two quantities: (1) the mag-
nitude of one of the vectors and (2) the scalar component of the second vector
along the direction of the first vector. For example, in Fig. 3-18b, has a scalar
component a cos along the direction of ; note that a perpendicular dropped
from the head of onto determines that component. Similarly, has a scalar
component b cos along the direction of .
a
:
4
b
:
b
:
a
:
b
:
4
a
:
b
:
a
:
"
b
:
a
:
"
4
$ 4
4
b
:
a
:
b
:
a
:
4
b
:
a
:
a
:
" b
:
a
:
" b
:
b
:
a
:
51
Figure 3-18 (a) Two vectors
and , with an angle f between
them. (b) Each vector has a
component along the direction
of the other vector.
b
:
a
:
a
a
b
b
φ
(a)
(b)
Component of b
along direction of
a is b cos φ
Component of a
along direction of
b is a cos φ
φ
Multiplying these gives
the dot product.
Or multiplying these
gives the dot product.
Equation 3-20 can be rewritten as follows to emphasize the components:
" " (a cos f)(b) " (a)(b cos f). (3-21)
The commutative law applies to a scalar product, so we can write
" " " .
When two vectors are in unit-vector notation, we write their dot product as
" " (ax # ay # az )"(bx # by # bz ), (3-22)
which we can expand according to the distributive law: Each vector component
of the first vector is to be dotted with each vector component of the second vec-
tor. By doing so, we can show that
" " axbx # ayby # azbz. (3-23)
b
:
a
:
k̂
ĵ
î
k̂
ĵ
î
b
:
a
:
a
:
b
:
b
:
a
:
b
:
a
:

CHAPTER 3 VECTORS
52
If and are parallel or antiparallel, ' " 0. The magnitude of ' , which can
be written as , is maximum when and are perpendicular to each other.
b
:
a
:
!a
:
' b
:
!
b
:
a
:
b
:
a
:
b
:
a
:
where f is the smaller of the two angles between and . (You must use the
b
:
a
:
The direction of is perpendicular to the plane that contains and .
b
:
a
:
c
:
Checkpoint 4
Vectors and have magnitudes of 3 units and 4 units, respectively.What is the
angle between the directions of and if equals (a) zero, (b) 12 units, and
(c) 12 units?
$
D
:
C
:
"
D
:
C
:
D
:
C
:
The Vector Product
The vector product of and , written ' , produces a third vector whose
magnitude is
c " ab sin f, (3-24)
c
:
b
:
a
:
b
:
a
:
them is 90°.) Also, we used the right-hand rule to get the direction of ' as
being in the positive direction of the z axis (thus in the direction of ).
k̂
ĵ
î
smaller of the two angles between the vectors because sin f and sin(360° $ f)
differ in algebraic sign.) Because of the notation, ' is also known as the cross
product, and in speech it is “a cross b.”
b
:
a
:
Figure 3-19a shows how to determine the direction of " ' with what is
known as a right-hand rule. Place the vectors and tail to tail without altering
their orientations, and imagine a line that is perpendicular to their plane where
they meet. Pretend to place your right hand around that line in such a way that
your fingers would sweep into through the smaller angle between them.Your
outstretched thumb points in the direction of .
The order of the vector multiplication is important. In Fig. 3-19b, we are
determining the direction of , so the fingers are placed to sweep
into through the smaller angle. The thumb ends up in the opposite direction
from previously, and so it must be that ; that is,
. (3-25)
In other words, the commutative law does not apply to a vector product.
In unit-vector notation, we write
' " (ax # ay # az ) ' (bx # by # bz ), (3-26)
which can be expanded according to the distributive law; that is, each component
of the first vector is to be crossed with each component of the second vector.The
cross products of unit vectors are given in Appendix E (see “Products of
Vectors”). For example, in the expansion of Eq. 3-26, we have
ax ' bx " axbx( ' ) " 0,
because the two unit vectors and are parallel and thus have a zero cross prod-
uct. Similarly, we have
ax ' by " axby( ' ) " axby .
In the last step we used Eq. 3-24 to evaluate the magnitude of ' as unity.
(These vectors and each have a magnitude of unity, and the angle between
ĵ
î
ĵ
î
k̂
ĵ
î
ĵ
î
î
î
î
î
î
î
k̂
ĵ
î
k̂
ĵ
î
b
:
a
:
b
:
' a
:
" $(a
:
' b
:
)
c/
:
" $c
:
a
:
b
:
c/
:
" b
:
' a
:
c
:
b
:
a
:
b
:
a
:
b
:
a
:
c
:

53
Continuing to expand Eq. 3-26, you can show that
' " (aybz $ byaz) # (azbx $ bzax) # (axby $ bxay) . (3-27)
A determinant (Appendix E) or a vector-capable calculator can also be used.
To check whether any xyz coordinate system is a right-handed coordinate
system, use the right-hand rule for the cross product ' " with that system. If
your fingers sweep (positive direction of x) into (positive direction of y) with
the outstretched thumb pointing in the positive direction of z (not the negative
direction), then the system is right-handed.
ĵ
î
k̂
ĵ
î
k̂
ĵ
î
b
:
a
:
Checkpoint 5
Vectors and have magnitudes of 3 units and 4 units, respectively.What is the an-
gle between the directions of and if the magnitude of the vector product
is (a) zero and (b) 12 units?
D
:
C
:
'
D
:
C
:
D
:
C
:
Figure 3-19 Illustration of the right-hand rule for vector products. (a) Sweep vector into vector with the fingers of your right hand.
Your outstretched thumb shows the direction of vector . (b) Showing that is the reverse of .
a
:
' b
:
b
:
' a
:
c
:
" a
:
' b
:
b
:
a
:
a
b b b
c
a
b
a a
(a)
(b)
c#
A

CHAPTER 3 VECTORS
54
gives the direction of .Thus, as shown in the figure, lies in
the xy plane. Because its direction is perpendicular to the
direction of (a cross product always gives a perpendicular
vector), it is at an angle of
250° $ 90° " 160° (Answer)
from the positive direction of the x axis.
a
:
c
:
c
:
Sample Problem 3.06 Cross product, right-hand rule
In Fig. 3-20, vector lies in the xy plane, has a magnitude of
18 units, and points in a direction 250° from the positive di-
rection of the x axis. Also, vector has a magnitude of
12 units and points in the positive direction of the z axis.What
is the vector product " ' ?
KEY IDEA
When we have two vectors in magnitude-angle notation, we
find the magnitude of their cross product with Eq. 3-24 and
the direction of their cross product with the right-hand rule
of Fig. 3-19.
Calculations: For the magnitude we write
c " ab sin f " (18)(12)(sin 90°) " 216. (Answer)
To determine the direction in Fig. 3-20, imagine placing the
fingers of your right hand around a line perpendicular to the
plane of and (the line on which is shown) such that
your fingers sweep into . Your outstretched thumb then
b
:
a
:
c
:
b
:
a
:
b
:
a
:
c
:
b
:
a
:
Figure 3-20 Vector (in the xy plane) is the vector (or cross)
product of vectors and .
b
:
a
:
c
:
z
250°
160°
y
x
a b
c = a b
This is the resulting
vector, perpendicular to
both a and b.
Sweep a into b.
Calculations: Here we write
" (3 $ 4 ) ' ($2 # 3 )
" 3 ' ($2 ) # 3 ' 3 # ($4 ) ' ($2 )
# ($4 ) ' 3 .
k̂
ĵ
î
ĵ
k̂
î
î
î
k̂
î
ĵ
î
c
:
Sample Problem 3.07 Cross product, unit-vector notation
If " 3 $ 4 and " $2 # 3 ,what is " ' ?
KEY IDEA
When two vectors are in unit-vector notation, we can find
their cross product by using the distributive law.
b
:
a
:
c
:
k̂
î
b
:
ĵ
î
a
:
We can separately evaluate the left side of Eq. 3-28 by
writing the vectors in unit-vector notation and using the
distributive law:
" " (3.0 $ 4.0 )"($2.0 # 3.0 )
" (3.0 )"($2.0 ) # (3.0 )"(3.0 )
# ($4.0 )"($2.0 ) # ($4.0 )"(3.0 ).
We next apply Eq. 3-20 to each term in this last expression.
The angle between the unit vectors in the first term ( and ) is
0°,and in the other terms it is 90°.We then have
" " $(6.0)(1) # (9.0)(0) # (8.0)(0) $ (12)(0)
" $6.0.
Substituting this result and the results of Eqs. 3-29 and 3-30
into Eq. 3-28 yields
$6.0 " (5.00)(3.61) cos f,
so (Answer)
4 " cos$1
$6.0
(5.00)(3.61)
" 1093 %1103.
b
:
a
:
î
î
k̂
ĵ
î
ĵ
k̂
î
î
î
k̂
î
ĵ
î
b
:
a
:
Sample Problem 3.05 Angle between two vectors using dot products
What is the angle between 3.0 4.0 and
2.0 3.0 ? (Caution: Although many of the following
steps can be bypassed with a vector-capable calculator, you
will learn more about scalar products if, at least here, you
use these steps.)
KEY IDEA
The angle between the directions of two vectors is included
in the definition of their scalar product (Eq. 3-20):
" " ab cos f. (3-28)
Calculations: In Eq. 3-28, a is the magnitude of , or
(3-29)
and b is the magnitude of , or
(3-30)
b " 2($2.0)2
# 3.02
" 3.61.
b
:
a "23.02
# ($4.0)2
" 5.00,
a
:
b
:
a
:
k̂
î #
$
b
:
"
ĵ
î $
a
:
"
4

55
REVIEW & SUMMARY
Scalars and Vectors Scalars, such as temperature, have magni-
tude only. They are specified by a number with a unit (10°C) and
obey the rules of arithmetic and ordinary algebra. Vectors, such as
displacement, have both magnitude and direction (5 m, north) and
obey the rules of vector algebra.
Adding Vectors Geometrically Two vectors and may
be added geometrically by drawing them to a common scale
and placing them head to tail. The vector connecting the tail of
the first to the head of the second is the vector sum . To
subtract from , reverse the direction of to get $ ; then
add $ to .Vector addition is commutative
and obeys the associative law
.
Components of a Vector The (scalar) components ax and ay of
any two-dimensional vector along the coordinate axes are found
by dropping perpendicular lines from the ends of onto the coor-
dinate axes.The components are given by
ax " a cos u and ay " a sin u, (3-5)
where u is the angle between the positive direction of the x axis
and the direction of . The algebraic sign of a component indi-
cates its direction along the associated axis. Given its compo-
nents, we can find the magnitude and orientation (direction) of
the vector by using
and
Unit-Vector Notation Unit vectors , , and have magnitudes of
unity and are directed in the positive directions of the x, y, and z
axes, respectively, in a right-handed coordinate system (as defined
by the vector products of the unit vectors).We can write a vector
in terms of unit vectors as
" ax # ay # az , (3-7)
in which ax , ay , and az are the vector components of and ax, ay,
and az are its scalar components.
a
:
k̂
ĵ
î
k̂
ĵ
î
a
:
a
:
k̂
ĵ
î
a " 2a2
x # a2
y
a
:
a
:
a
:
a
:
(a
:
# b
:
) # c
:
" a
:
# (b
:
# c
:
)
a
:
# b
:
" b
:
# a
:
a
:
b
:
b
:
b
:
a
:
b
:
s
:
b
:
a
:
Review & Summary
Adding Vectors in Component Form To add vectors in com-
ponent form, we use the rules
rx " ax # bx ry " ay # by rz " az # bz. (3-10 to 3-12)
Here and are the vectors to be added, and is the vector sum.
Note that we add components axis by axis.We can then express the
sum in unit-vector notation or magnitude-angle notation.
Product of a Scalar and a Vector The product of a scalar s and
a vector is a new vector whose magnitude is sv and whose direc-
tion is the same as that of if s is positive, and opposite that of if
s is negative. (The negative sign reverses the vector.) To divide by
s, multiply by 1/s.
The Scalar Product The scalar (or dot) product of two vectors
and is written " and is the scalar quantity given by
" " ab cos f, (3-20)
in which f is the angle between the directions of and .A scalar
product is the product of the magnitude of one vector and the
scalar component of the second vector along the direction of the
first vector. Note that " " " which means that the scalar
product obeys the commutative law.
In unit-vector notation,
" " (ax # ay # az )"(bx # by # bz ), (3-22)
which may be expanded according to the distributive law.
The Vector Product The vector (or cross) product of two vectors
and is written ' and is a vector whose magnitude c is
given by
c " ab sin f, (3-24)
in which f is the smaller of the angles between the directions of
and . The direction of is perpendicular to the plane
defined by and and is given by a right-hand rule, as shown in
Fig. 3-19. Note that ' " $( ' ), which means that the vec-
tor product does not obey the commutative law.
In unit-vector notation,
' " (ax # ay # az ) ' (bx # by # bz ), (3-26)
which we may expand with the distributive law.
k̂
ĵ
î
k̂
ĵ
î
b
:
a
:
a
:
b
:
b
:
a
:
b
:
a
:
c
:
b
:
a
:
c
:
b
:
a
:
b
:
a
:
k̂
ĵ
î
k̂
ĵ
î
b
:
a
:
a
:
,
b
:
b
:
a
:
b
:
a
:
b
:
a
:
b
:
a
:
b
:
a
:
v
:
v
:
v
:
v
:
v
:
r
:
b
:
a
:
We next evaluate each term with Eq. 3-24, finding the
direction with the right-hand rule. For the first term here,
the angle f between the two vectors being crossed is 0. For
the other terms, f is 90°.We find
" $6(0) # 9($ ) # 8($ ) $ 12
" $12 $ 9 $ 8 . (Answer)
k̂
ĵ
î
î
k̂
ĵ
c
:
This vector is perpendicular to both and , a fact you
b
:
a
:
c
:
can check by showing that " = 0 and " = 0; that is, there
is no component of along the direction of either or .
In general: A cross product gives a perpendicular
vector, two perpendicular vectors have a zero dot prod-
uct, and two vectors along the same axis have a zero
cross product.
b
:
a
:
c
:
b
:
c
:
a
:
c
:
(3-2)
(3-3)
tan 1 "
ay
ax
(3-6)

CHAPTER 3 VECTORS
56
10 Figure 3-25 shows vector and
four other vectors that have the same
magnitude but differ in orientation.
(a) Which of those other four vectors
have the same dot product with ? (b)
Which have a negative dot product
with ?
11 In a game held within a three-
dimensional maze, you must move
your game piece from start, at xyz co-
ordinates (0, 0, 0), to finish, at coordinates ($2 cm, 4 cm, $4 cm).
The game piece can undergo only the displacements (in centime-
ters) given below. If, along the way, the game piece lands at coordi-
nates ($5 cm, $1 cm, $1 cm) or (5 cm, 2 cm, $1 cm), you lose the
game. Which displacements and in what sequence will get your
game piece to finish?
" $7 # 2 $ 3 " 2 $ 3 # 2
" 2 $ # 4 " 3 # 5 $ 3 .
12 The x and y components of four vectors , , ,and are given
below. For which vectors will your calculator give you the correct an-
gle u when you use it to find u with Eq. 3-6? Answer first by examin-
ing Fig.3-12,and then check your answers with your calculator.
ax " 3 ay " 3 cx " $3 cy " $3
bx " $3 by " 3 dx " 3 dy " $3.
13 Which of the following are correct (meaningful) vector
expressions? What is wrong with any incorrect expression?
(a) " ( " ) (f) # ( ' )
(b) ' ( " ) (g) 5 #
(c) " ( ' ) (h) 5 # ( " )
(d) ' ( ' ) (i) 5 # ( ' )
(e) # ( " ) (j) ( " ) # ( ' )
C
:
B
:
B
:
A
:
C
:
B
:
A
:
C
:
B
:
C
:
B
:
A
:
C
:
B
:
C
:
B
:
A
:
A
:
C
:
B
:
A
:
C
:
B
:
A
:
C
:
B
:
A
:
d
:
c
:
b
:
a
:
k̂
ĵ
î
s
:
k̂
ĵ
î
q
:
k̂
ĵ
î
r
:
k̂
ĵ
î
p
:
A
:
A
:
A
:
B
A
C
E
D
θ
θ
θ
θ
Figure 3-25 Question 10.
F F
F
v
v v
x
x
x
z z z
y
y
y
(1) (2) (3)
Questions
1 Can the sum of the magnitudes
of two vectors ever be equal to the
magnitude of the sum of the same
two vectors? If no, why not? If yes,
when?
2 The two vectors shown in Fig. 3-21
lie in an xy plane. What are the signs
of the x and y components, respec-
tively, of (a) , (b) , and
(c) ?
3 Being part of the “Gators,” the
University of Florida golfing team
must play on a putting green with an
alligator pit. Figure 3-22 shows an
overhead view of one putting chal-
lenge of the team; an xy coordinate
system is superimposed. Team mem-
bers must putt from the origin to the
hole, which is at xy coordinates (8 m,
12 m), but they can putt the golf ball
using only one or more of the fol-
lowing displacements, one or more
times:
, .
The pit is at coordinates (8 m, 6 m). If a team member putts the
ball into or through the pit, the member is automatically trans-
ferred to Florida State University, the arch rival. What sequence
of displacements should a team member use to avoid the pit and
the school transfer?
4 Equation 3-2 shows that the addition of two vectors and is
commutative. Does that mean subtraction is commutative, so that
$ " $ ?
5 Which of the arrangements of axes in Fig. 3-23 can be labeled
“right-handed coordinate system”? As usual, each axis label indi-
cates the positive side of the axis.
a
:
b
:
b
:
a
:
b
:
a
:
d3
:
" (8 m)î
d2
:
" (6 m)ĵ,
d1
:
" (8 m)î # (6 m)ĵ
d2
:
$ d1
:
d1
:
$ d2
:
d1
:
# d2
:
6 Describe two vectors and such that
(a) # " and a # b " c;
(b) # " $ ;
(c) # " and a2
# b2
" c2
.
7 If " # # ($ ), does (a) # ($ ) " # ($ ), (b) "
($ ) # # , and (c) # ($ ) " # ?
8 If " " " , must equal ?
9 If " q( ' ) and is perpendicular to , then what is the
direction of in the three situations shown in Fig. 3-24 when con-
stant q is (a) positive and (b) negative?
B
:
B
:
v
:
B
:
v
:
F
:
c
:
b
:
c
:
a
:
b
:
a
:
b
:
a
:
d
:
c
:
c
:
d
:
b
:
a
:
b
:
c
:
d
:
a
:
c
:
b
:
a
:
d
:
c
:
b
:
a
:
b
:
a
:
b
:
a
:
c
:
b
:
a
:
b
:
a
:
y
x
d2
d1
Hole
Gator
pit
y
x
z
y
x
(a )
y
z
x
(b )
x
z
y
(c )
y
y
y
x
z
(d )
x
z
(e )
z
x
( f )

tors and in Fig. 3-28 have equal
magnitudes of 10.0 m and the angles
are 30° and 105°. Find the
(a) x and (b) y components of their
vector sum , (c) the magnitude of ,
and (d) the angle makes with the
positive direction of the x axis.
•16 For the displacement vectors
and
, give in
(a) unit-vector notation, and as (b) a
magnitude and (c) an angle (rela-
tive to ). Now give in (d) unit-vector notation, and as (e) a
magnitude and (f) an angle.
•17 Three vectors , , and each have a magnitude of
50 m and lie in an xy plane.Their directions relative to the positive
direction of the x axis are 30°, 195°, and 315°, respectively.What are
(a) the magnitude and (b) the angle of the vector , and
(c) the magnitude and (d) the angle of ? What are the
(e) magnitude and (f) angle of a fourth vector such that
?
•18 In the sum , vector has a magnitude of 12.0 m
and is angled 40.0° counterclockwise from the direction,and vec-
tor has a magnitude of 15.0 m and is angled 20.0° counterclock-
wise from the direction.What are (a) the magnitude and (b) the
angle (relative to ) of ?
•19 In a game of lawn chess, where pieces are moved between
the centers of squares that are each 1.00 m on edge, a knight is
moved in the following way: (1) two squares forward, one square
rightward; (2) two squares leftward, one square forward; (3) two
squares forward, one square leftward. What are (a) the magnitude
and (b) the angle (relative to “forward”) of the knight’s overall dis-
placement for the series of three moves?
B
:
#x
$x
C
:
#x
A
:
A
:
# B
:
" C
:
(a
:
# b
:
) $ (c
:
# d
:
) " 0
d
:
a
:
$ b
:
# c
:
a
:
# b
:
# c
:
c
:
b
:
a
:
ILW
b
:
$ a
:
î
a
:
# b
:
(5.0 m)î # ($2.0 m)ĵ
b
:
"
a
:
" (3.0 m)î # (4.0 m)ĵ
r
:
r
:
r
:
12 "
11 "
b
:
a
:
Module 3-1 Vectors and Their Components
•1 What are (a) the x component and (b) the y component of a
vector in the xy plane if its direction is 250°
counterclockwise from the positive direction
of the x axis and its magnitude is 7.3 m?
•2 A displacement vector in the xy plane
is 15 m long and directed at angle u " 30° in
Fig. 3-26. Determine (a) the x component
and (b) the y component of the vector.
•3 The x component of vector is
25.0 m and the y component is 40.0 m. (a) What is the magni-
tude of ? (b) What is the angle between the direction of and
the positive direction of x?
•4 Express the following angles in radians: (a) 20.0°, (b) 50.0°,
(c) 100°. Convert the following angles to degrees: (d) 0.330 rad,
(e) 2.10 rad, (f) 7.70 rad.
•5 A ship sets out to sail to a point 120 km due north. An unex-
pected storm blows the ship to a point 100 km due east of its
starting point. (a) How far and (b) in what direction must it now
sail to reach its original destination?
•6 In Fig. 3-27, a heavy piece of
machinery is raised by sliding it a
distance d " 12.5 m along a plank
oriented at angle u " 20.0° to the
horizontal. How far is it moved
(a) vertically and (b) horizontally?
•7 Consider two displacements,
one of magnitude 3 m and another
of magnitude 4 m. Show how the
displacement vectors may be combined to get a resultant displace-
ment of magnitude (a) 7 m, (b) 1 m, and (c) 5 m.
Module 3-2 Unit Vectors, Adding Vectors by Components
•8 A person walks in the following pattern: 3.1 km north, then
2.4 km west, and finally 5.2 km south. (a) Sketch the vector dia-
gram that represents this motion. (b) How far and (c) in what di-
rection would a bird fly in a straight line from the same starting
point to the same final point?
•9 Two vectors are given by
and .
In unit-vector notation, find (a) , (b) , and (c) a third
vector such that .
•10 Find the (a) x, (b) y, and (c) z components of the sum of
the displacements and whose components in meters are
cx 7.4, cy 3.8, cz 6.1; dx 4.4, dy 2.0, dz 3.3.
•11 (a) In unit-vector notation, what is the sum if
(4.0 m) (3.0 m) and ( 13.0 m) (7.0 m) ? What
are the (b) magnitude and (c) direction of ?
a
:
# b
:
ĵ
#
î
$
"
b
:
ĵ
#
î
"
a
:
a
:
# b
:
SSM
"
" $
"
" $
" $
"
d
:
c
:
r
:
a
:
$ b
:
# c
:
" 0
c
:
a
:
$ b
:
a
:
# b
:
b
:
" ($1.0 m)î # (1.0 m)ĵ # (4.0 m)k̂
a
:
" (4.0 m)î $ (3.0 m)ĵ # (1.0 m)k̂
A
:
A
:
#
$
A
:
SSM
r
:
a
:
SSM
57
PROBLEMS
θ
d
Figure 3-27 Problem 6.
•12 A car is driven east for a distance of 50 km, then north for 30
km, and then in a direction 30° east of north for 25 km. Sketch the
vector diagram and determine (a) the magnitude and (b) the angle
of the car’s total displacement from its starting point.
•13 A person desires to reach a point that is 3.40 km from her
present location and in a direction that is 35.0° north of east.
However, she must travel along streets that are oriented either
north–south or east–west. What is the minimum distance she
could travel to reach her destination?
•14 You are to make four straight-line moves over a flat desert
floor, starting at the origin of an xy coordinate system and ending
at the xy coordinates ($140 m, 30 m). The x component and y
component of your moves are the following, respectively, in me-
ters: (20 and 60), then (bx and $70), then ($20 and cy), then ($60
and $70). What are (a) component bx and (b) component cy?
What are (c) the magnitude and (d) the angle (relative to the pos-
itive direction of the x axis) of the overall displacement?
•15 The two vec-
WWW
ILW
SSM
θ
x
y
r
Figure 3-26
Problem 2.
θ
O
x
y
2
θ1
a
b
Tutoring problem available (at instructor’s discretion) in WileyPLUS and WebAssign
SSM Worked-out solution available in Student Solutions Manual
• – ••• Number of dots indicates level of problem difficulty
Additional information available in The Flying Circus of Physics and at flyingcircusofphysics.com
WWW Worked-out solution is at
ILW Interactive solution is at
http://www.wiley.com/college/halliday
Problems

•••32 In Fig. 3-31, a cube of edge
length a sits with one corner at the ori-
gin of an xyz coordinate system. A
body diagonal is a line that extends
from one corner to another through
the center. In unit-vector notation,
what is the body diagonal that extends
from the corner at (a) coordinates (0,
0, 0), (b) coordinates (a, 0, 0), (c) coor-
dinates (0, a, 0), and (d) coordinates (a, a, 0)? (e) Determine the
CHAPTER 3 VECTORS
58
••30 Here are two vectors:
What are (a) the magnitude and (b) the angle (relative to ) of ?
What are (c) the magnitude and (d) the angle of ? What are (e)
the magnitude and (f) the angle of (g) the magnitude and
(h) the angle of ; and (i) the magnitude and (j) the angle of
? (k) What is the angle between the directions of
and ?
••31 In Fig. 3-30, a vector with a magnitude of 17.0 m is
directed at angle 56.0° counterclockwise from the axis.
What are the components (a) ax and (b) ay of the vector? A sec-
ond coordinate system is inclined by angle 18.0° with respect
to the first. What are the components (c) and (d) in this
primed coordinate system?
a/
y
a/
x
1/ "
#x
1 "
a
:
a
:
$ b
:
b
:
$ a
:
a
:
$ b
:
b
:
$ a
:
a
:
# b
:
;
b
:
a
:
î
a
:
" (4.0 m)î $ (3.0 m)ĵ and b
:
" (6.0 m)î # (8.0 m)ĵ.
••20 An explorer is caught in a whiteout (in which the
snowfall is so thick that the ground cannot be distinguished from
the sky) while returning to base camp. He was supposed to travel
due north for 5.6 km, but when the snow clears, he discovers that
he actually traveled 7.8 km at 50° north of due east. (a) How far
and (b) in what direction must he now travel to reach base camp?
••21 An ant, crazed by the Sun on a hot Texas afternoon, darts
over an xy plane scratched in the dirt. The x and y components of
four consecutive darts are the following, all in centimeters: (30.0,
40.0), (bx, $70.0), ($20.0, cy), ($80.0, $70.0). The overall displace-
ment of the four darts has the xy components ($140, $20.0).What
are (a) bx and (b) cy? What are the (c) magnitude and (d) angle
(relative to the positive direction of the x axis) of the overall
displacement?
••22 (a) What is the sum of the following four vectors in unit-
vector notation? For that sum, what are (b) the magnitude, (c) the
angle in degrees, and (d) the angle in radians?
••23 If is added to , the result is a vector in the
positive direction of the y axis, with a magnitude equal to that of .
What is the magnitude of ?
••24 Vector , which is directed along an x axis, is to be added
A
:
B
:
C
:
C
:
" 3.0î # 4.0ĵ
B
:
G
:
: 4.00 m at #1.20 rad H
:
: 6.00 m at $2103
E
:
: 6.00 m at #0.900 rad F
:
: 5.00 m at $75.03
e
a
b
c
h
i
y
x
j
k
l
m
n
o
p
q
r
s
t
u
w
v
d
f
g
A
B
y
x
z
a
a
a
O
x
y
y'
x'
a'x
ay
θ
θ
ax
a'y
a
'
θ'
an ant’s displacement from the nest (find it in the figure) if the
ant enters the trail at point A? What are the (c) magnitude and
(d) angle if it enters at point B?
to vector , which has a magnitude of 7.0 m.The sum is a third vec-
tor that is directed along the y axis, with a magnitude that is 3.0
times that of .What is that magnitude of ?
••25 Oasis B is 25 km due east of oasis A. Starting from oasis
A, a camel walks 24 km in a direction 15° south of east and then
walks 8.0 km due north. How far is the camel then from oasis B?
••26 What is the sum of the following four vectors in (a) unit-
vector notation, and as (b) a magnitude and (c) an angle?
••27 If and then
d
:
3 " 2î # 4ĵ,
d
:
1# d
:
2 " 5d
:
3, d
:
1 $ d
:
2 " 3d
:
3,
C
:
" ($4.00 m)î # ($6.00 m)ĵ D:
:
5.00 m, at $2353
A
:
" (2.00 m)î # (3.00 m)ĵ B:
:
4.00 m, at #65.03
A
:
A
:
B
:
what are, in unit-vector notation, (a) and (b)
••28 Two beetles run across flat sand, starting at the same point.
Beetle 1 runs 0.50 m due east, then 0.80 m at 30° north of due east.
Beetle 2 also makes two runs; the first is 1.6 m at 40° east of due
north. What must be (a) the magnitude and (b) the direction of its
second run if it is to end up at the new location of beetle 1?
••29 Typical backyard ants often create a network of
chemical trails for guidance. Extending outward from the nest, a
trail branches (bifurcates) repeatedly, with 60° between the
branches. If a roaming ant chances upon a trail, it can tell the
way to the nest at any branch point: If it is moving away from
the nest, it has two choices of path requiring a small turn in
its travel direction, either 30° leftward or 30° rightward. If
it is moving toward the nest, it has only one such choice.
Figure 3-29 shows a typical ant trail, with lettered straight sec-
tions of 2.0 cm length and symmetric bifurcation of 60°. Path v is
parallel to the y axis. What are the (a) magnitude and (b) angle
(relative to the positive direction of the superimposed x axis) of
d
:
2?
d
:
1

culate the angle between the two vectors given by
and .
••42 In a meeting of mimes, mime 1 goes through a displacement
and mime 2 goes through a displacement
. What are (a) , (b) ,
(c) , and (d) the com-
ponent of along the direction of
? (Hint: For (d), see Eq. 3-20 and
Fig. 3-18.)
••43 The three vectors in
Fig. 3-33 have magnitudes a 3.00 m,
b 4.00 m,and c 10.0 m and angle
30.0°. What are (a) the x compo-
nent and (b) the y component of ;(c)
the x component and (d) the y com-
a
:
1 "
"
"
"
ILW
SSM
d
:
2
d
:
1
(d
:
1 # d
:
2)" d
:
2
d
:
1 " d
:
2
d
:
1 ' d
:
2
d
:
2 " ($3.0 m)î # (4.0 m)ĵ
d
:
1 " (4.0 m)î # (5.0 m)ĵ
b
:
" 2.0î # 1.0ĵ # 3.0k̂
3.0ĵ # 3.0k̂
a
:
" 3.0î #
(a) , (b) , (c) , and
(a
:
# b
:
)" b
:
a
:
" b
:
a
:
' b
:
is not shown.)
•34 Two vectors are presented as
and . Find
b
:
" 2.0î # 4.0ĵ
a
:
" 3.0î # 5.0ĵ
59
PROBLEMS
angles that the body diagonals make with the adjacent edges.
(f) Determine the length of the body diagonals in terms of a.
Module 3-3 Multiplying Vectors
•33 For the vectors in Fig. 3-32, with a 4, b 3, and c 5, what
are (a) the magnitude and (b) the direction
of , (c) the magnitude and (d) the di-
rection of , and (e) the magnitude
and (f) the direction of ? (The z axis
b
:
' c
:
a
:
' c
:
a
:
' b
:
"
"
"
ponent of ;and (e) the x component and (f) the y component of ? If
,what are the values of (g) p and (h) q?
••44 In the product , take q " 2,
.
What then is in unit-vector notation if Bx " By?
Additional Problems
45 Vectors and lie in an xy plane. has magnitude 8.00 and
angle 130°; has components Bx 7.72 and By 9.20. (a)
What is What is in (b) unit-vector notation and
(c) magnitude-angle notation with spherical coordinates (see
Fig. 3-34)? (d) What is the angle between the directions of and
(Hint: Think a bit before you resort to a calculation.)
What is in (e) unit-vector notation and (f) magnitude-
angle notation with spherical coordinates?
A
:
# 3.00k̂
4A
:
' 3B
:
?
A
:
4A
:
' 3B
:
5A
:
"B
:
?
" $
" $
B
:
A
:
B
:
A
:
B
:
v
:
" 2.0î # 4.0ĵ # 6.0k̂ and F
:
" 4.0î $ 20ĵ # 12k̂
F
:
" qv
:
' B
:
c
:
" pa
:
# qb
:
c
:
b
:
θ
a
c
b
x
y
φ
θ
y
x
z
46 Vector has a magnitude of 5.0 m and is directed east.
a
:
(d) the component of along the direc-
tion of . (Hint: For (d), consider Eq. 3-20
and Fig. 3-18.)
•35 Two vectors, and , lie in the xy plane.Their magnitudes are
4.50 and 7.30 units, respectively, and their directions are 320° and
85.0°, respectively, as measured counterclockwise from the positive
x axis.What are the values of (a) and (b) ?
•36 If and , then what is
?
•37 Three vectors are given by
and . Find (a)
, (b) , and (c) .
••38 For the following three vectors, what is ?
••39 Vector has a magnitude of 6.00 units, vector has a mag-
B
:
A
:
B
:
" $3.00î # 4.00ĵ # 2.00k̂ C
:
" 7.00î $ 8.00ĵ
A
:
" 2.00î # 3.00ĵ $ 4.00k̂
3C
:
"(2A
:
' B
:
)
a
:
' (b
:
# c
:
)
a
:
"(b
:
# c
:
)
a
:
"(b
:
' c
:
)
c
:
" 2.0î # 2.0ĵ # 1.0k̂
b
:
" $1.0î $ 4.0ĵ # 2.0k̂,
a
:
" 3.0î # 3.0ĵ $ 2.0k̂,
(d
:
1 # d
:
2)"(d
:
1 ' 4d
:
2)
d
:
2 " $5î # 2ĵ $ k̂
d
:
1 " 3î $ 2ĵ # 4k̂
r
:
' s
:
r
:
" s
:
s
:
r
:
b
:
a
:
a
c
b
y
x
Figure 3-32
Problems 33 and 54.
nitude of 7.00 units, and has a value of 14.0.What is the angle
between the directions of and ?
••40 Displacement is in the yz plane 63.0° from the positive
direction of the y axis, has a positive z component, and has a mag-
nitude of 4.50 m. Displacement is in the xz plane 30.0° from the
positive direction of the x axis, has a positive z component, and has
magnitude 1.40 m.What are (a) , (b) , and (c) the an-
gle between and ?
••41 Use the definition of scalar product,
, and the fact that to cal-
a
:
" b
:
" axbx # ayby # azbz
a
:
" b
:
" ab cos 1
WWW
ILW
SSM
d
:
2
d
:
1
d
:
1 ' d
:
2
d
:
1 " d
:
2
d
:
2
d
:
1
B
:
A
:
A
:
"B
:
ax " 3.2, ay 1.6, bx 0.50, by 4.5. (a) Find the angle between
the directions of and .There are two vectors in the xy plane that
are perpendicular to and have a magnitude of 5.0 m. One, vector
, has a positive x component and the other, vector , a negative x
component. What are (b) the x component and (c) the y compo-
nent of vector , and (d) the x component and (e) the y component
of vector ?
49 A sailboat sets out from the U.S. side of Lake Erie for a
point on the Canadian side, 90.0 km due north. The sailor, how-
ever, ends up 50.0 km due east of the starting point. (a) How far
and (b) in what direction must the sailor now sail to reach the orig-
inal destination?
50 Vector is in the negative direction of a y axis, and vector
is in the positive direction of an x axis. What are the directions of
(a) and (b) What are the magnitudes of products (c)
and (d) What is the direction of the vector result-
ing from (e) and (f) ? What is the magnitude of the
vector product in (g) part (e) and (h) part (f)? What are the (i)
magnitude and (j) direction of ?
d
:
1 ' (d
:
2/4)
d
:
2 ' d
:
1
d
:
1 ' d
:
2
d
:
1 "(d
:
2 /4)?
d
:
1 " d
:
2
d
:
1/($4)?
d
:
2/4
d
:
2
d
:
1
SSM
d
:
c
:
d
:
c
:
a
:
b
:
a
:
"
"
"
Vector has a magnitude of 4.0 m and is directed 35° west of due
north.What are (a) the magnitude and (b) the direction of ?
What are (c) the magnitude and (d) the direction of ? (e)
Draw a vector diagram for each combination.
47 Vectors and lie in an xy plane. has magnitude 8.00
and angle 130°; has components Bx " $7.72 and By " $9.20.
What are the angles between the negative direction of the y axis
and (a) the direction of , (b) the direction of the product
, and (c) the direction of ?
48 Two vectors and have the components, in meters,
b
:
a
:
A
:
' (B
:
# 3.00k̂)
A
:
' B
:
A
:
B
:
A
:
B
:
A
:
b
:
$ a
:
a
:
# b
:
b
:

CHAPTER 3 VECTORS
60
51 Rock faults are ruptures along which opposite faces of rock
have slid past each other. In Fig. 3-35, points A and B coincided be-
fore the rock in the foreground slid down to the right. The net dis-
placement is along the plane of the fault.The horizontal compo-
nent of is the strike-slip AC. The component of that is
directed down the plane of the fault is the dip-slipAD. (a)What is the
magnitude of the net displacement if the strike-slip is 22.0 m and
the dip-slip is 17.0 m? (b) If the plane of the fault is inclined at angle
52.0° to the horizontal, what is the vertical component of ?
AB
9:
4 "
AB
9:
AB
9:
AB
9:
AB
9:
58 A vector has a magnitude of 2.5 m and points north. What
are (a) the magnitude and (b) the direction of ? What are (c)
the magnitude and (d) the direction of ?
59 has the magnitude 12.0 m and is angled 60.0° counterclock-
wise from the positive direction of the x axis of an xy coordinate
system. Also, on that same coordinate
system. We now rotate the system counterclockwise about the origin
by 20.0° to form an x/y/ system. On this new system, what are (a)
and (b) ,both in unit-vector notation?
60 If and , then what are
(a) and (b) ?
61 (a) In unit-vector notation, what is if
5.0 4.0 6.0 , 2.0 2.0 3.0 , and 4.0
3.0 2.0 ? (b) Calculate the angle between and the positive z
axis. (c) What is the component of along the direction of ? (d)
What is the component of perpendicular to the direction of but
in the plane of and ? (Hint: For (c), see Eq. 3-20 and Fig. 3-18;
for (d), see Eq. 3-24.)
62 A golfer takes three putts to get the ball into the hole. The
first putt displaces the ball 3.66 m north, the second 1.83 m south-
east, and the third 0.91 m southwest. What are (a) the magnitude
and (b) the direction of the displacement needed to get the ball
into the hole on the first putt?
63 Here are three vectors in meters:
What results from (a) (b) and
(c) ?
64 A room has dimensions 3.00 m (height)
3.70 m 4.30 m. A fly starting at one corner flies around, ending
up at the diagonally opposite corner. (a) What is the magnitude of
its displacement? (b) Could the length of its path be less than this
magnitude? (c) Greater? (d) Equal? (e) Choose a suitable coordi-
nate system and express the components of the displacement vec-
tor in that system in unit-vector notation. (f) If the fly walks, what
is the length of the shortest path? (Hint: This can be answered
without calculus. The room is like a box. Unfold its walls to flatten
them into a plane.)
65 A protester carries his sign of protest, starting from the ori-
gin of an xyz coordinate system, with the xy plane horizontal. He
moves 40 m in the negative direction of the x axis, then 20 m
along a perpendicular path to his left, and then 25 m up a water
tower. (a) In unit-vector notation, what is the displacement of
the sign from start to end? (b) The sign then falls to the foot of
the tower. What is the magnitude of the displacement of the sign
from start to this new end?
66 Consider in the positive direction of x, in the positive di-
rection of y, and a scalar d. What is the direction of if d is
(a) positive and (b) negative? What is the magnitude of (c)
and (d) ? What is the direction of the vector resulting from
(e) and (f) ? (g) What is the magnitude of the vector
product in (e)? (h) What is the magnitude of the vector product in
(f)? What are (i) the magnitude and (j) the direction of ' if d
is positive?
b
:
/d
a
:
b
:
' a
:
a
:
' b
:
a
:
" b
:
/d
a
:
" b
:
b
:
/d
b
:
a
:
'
'
WWW
SSM
d
:
1 ' (d
:
2 # d
:
3)
d
:
1 "(d
:
2 ' d
:
3),
d
:
1 "(d
:
2 # d
:
3),
d
:
3 " 2.0î # 3.0ĵ # 1.0k̂.
d
:
2 " $2.0î $ 4.0ĵ # 2.0k̂
d
:
1 " $3.0î # 3.0ĵ # 2.0k̂
b
:
a
:
b
:
a
:
b
:
a
:
r
:
k̂
ĵ #
î #
c
:
"
k̂
ĵ #
î #
b
:
" $
k̂
ĵ $
î #
a
:
"
c
:
b
:
#
a
:
$
r
:
"
b
:
a
:
c
:
" 3î # 4ĵ
a
:
$ b
:
" 2c
:
, a
:
# b
:
" 4c
:
,
B
:
A
:
B
:
" (12.0 m)î # (8.00 m)ĵ
A
:
$3.0d
:
4.0d
:
d
:
A
D
C
Strike-slip
Dip-slip
Fault plane
B
φ
52 Here are three displacements, each measured in meters:
and
. (a) What is ? (b) What is the
angle between and the positive z axis? (c) What is the compo-
nent of along the direction of (d) What is the component of
that is perpendicular to the direction of and in the plane of
and (Hint: For (c), consider Eq. 3-20 and Fig. 3-18; for (d), con-
sider Eq. 3-24.)
53 A vector of magnitude 10 units and another vector
of magnitude 6.0 units differ in directions by 60°. Find (a) the
scalar product of the two vectors and (b) the magnitude of the vec-
tor product .
54 For the vectors in Fig. 3-32, with a " 4, b " 3, and c " 5, calcu-
late (a) , (b) , and (c) .
55 A particle undergoes three successive displacements in a
plane, as follows: 4.00 m southwest; then 5.00 m east; and
finally 6.00 m in a direction 60.0° north of east. Choose a coor-
dinate system with the y axis pointing north and the x axis pointing
east.What are (a) the x component and (b) the y component of ?
What are (c) the x component and (d) the y component of ?
What are (e) the x component and (f) the y component of ?
Next, consider the net displacement of the particle for the three
successive displacements. What are (g) the x component, (h) the y
component, (i) the magnitude, and (j) the direction of the net dis-
placement? If the particle is to return directly to the starting point,
(k) how far and (l) in what direction should it move?
56 Find the sum of the following four vectors in (a) unit-vector
notation, and as (b) a magnitude and (c) an angle relative to #x.
: 10.0 m, at 25.0° counterclockwise from #x
: 12.0 m, at 10.0° counterclockwise from #y
: 8.00 m, at 20.0° clockwise from $y
: 9.00 m, at 40.0° counterclockwise from $y
57 If is added to ,the result is 6.0 # 1.0 .If is subtracted
from ,the result is 4.0 7.0 .What is the magnitude of ?
A
:
ĵ
#
î
$
A
:
B
:
ĵ
î
A
:
B
:
SSM
S
:
R
:
Q
:
P
:
d
:
3
d
:
2
d
:
1
d
:
3,
d
:
2,
d
:
1,
b
:
" c
:
a
:
" c
:
a
:
" b
:
a
:
' b
:
b
:
a
:
SSM
d
:
2?
d
:
1
d
:
2
d
:
1
d
:
2?
d
:
1
r
:
r
:
" d
:
1 $ d
:
2 # d
:
3
4.0î # 3.0ĵ # 2.0k̂
d
:
3 "
d
:
2 " $1.0î # 2.0ĵ # 3.0k̂,
d
:
1 " 4.0î # 5.0ĵ $ 6.0k̂,

61
PROBLEMS
67 Let be directed to the east, be directed to the north, and k̂
ĵ
î 72 A fire ant, searching for hot sauce in a picnic area, goes
through three displacements along level ground: l for 0.40 m
southwest (that is, at 45° from directly south and from directly
west), 2 for 0.50 m due east, 3 for 0.60 m at 60° north of east.
Let the positive x direction be east and the positive y direction
be north. What are (a) the x component and (b) the y compo-
nent of l? Next, what are (c) the x component and (d) the y
component of 2? Also, what are (e) the x component and (f)
the y component of 3?
What are (g) the x component, (h) the y component, (i) the
magnitude, and (j) the direction of the ant’s net displacement? If
the ant is to return directly to the starting point, (k) how far and (1)
in what direction should it move?
73 Two vectors are given by " 3.0 # 5.0 and " 2.0 # 4.0 .
ĵ
î
b
:
ĵ
î
a
:
d
:
d
:
d
:
d
:
d
:
d
:
a
b
f
BOSTON
and Vicinity
Wellesley
Waltham
Brookline
Newton
Arlington
Lexington
Woburn
Medford
Lynn
Salem
Quincy
5 10 km
BOSTON
Massachusetts
Bay
Bank
Walpole
Framingham
Weymouth
Dedham
Winthrop
N
be directed upward. What are the values of products (a) " , (b)
($ ) " ($ ), and (c) " ($ )? What are the directions (such as east
ĵ
ĵ
ĵ
k̂
k̂
î
or down) of products (d) ' ,(e) ($ ) ' ($ ),and (f) ($ ) ' ($ )?
68 A bank in downtown Boston is robbed (see the map in
Fig. 3-36). To elude police, the robbers escape by helicopter, mak-
ing three successive flights described by the following displace-
ments: 32 km, 45° south of east; 53 km, 26° north of west; 26 km, 18°
east of south. At the end of the third flight they are captured. In
what town are they apprehended?
ĵ
k̂
ĵ
î
ĵ
k̂
69 A wheel with a radius of 45.0 cm
rolls without slipping along a hori-
zontal floor (Fig. 3-37). At time t1,
the dot P painted on the rim of the
wheel is at the point of contact be-
tween the wheel and the floor. At a
later time t2, the wheel has rolled
through one-half of a revolution.
What are (a) the magnitude and (b)
the angle (relative to the floor) of
the displacement of P?
70 A woman walks 250 m in the direction 30° east of north, then
175 m directly east. Find (a) the magnitude and (b) the angle of her
final displacement from the starting point. (c) Find the distance she
walks. (d) Which is greater, that distance or the magnitude of her
displacement?
71 A vector has a magnitude 3.0 m and is directed south. What
are (a) the magnitude and (b) the direction of the vector 5.0 ? What
are (c) the magnitude and (d) the direction of the vector $2.0 ?
d
:
d
:
d
:
P
At time t1 At time t2
P
Find (a) ' , (b) , (c) , and (d) the component of
along the direction of .
74 Vector lies in the yz plane 63.03 from the positive direction
of the y axis, has a positive z component, and has magnitude 3.20
units.Vector lies in the xz plane 48.03 from the positive direction
of the x axis, has a positive z component, and has magnitude 1.40
units. Find (a) " , (b) ' , and (c) the angle between and .
75 Find (a) “north cross west,” (b) “down dot south,” (c) “east
cross up,” (d) “west dot west,” and (e) “south cross south.” Let each
“vector” have unit magnitude.
76 A vector , with a magnitude of 8.0 m, is added to a vector ,
which lies along an x axis. The sum of these two vectors is a third
vector that lies along the y axis and has a magnitude that is twice
the magnitude of .What is the magnitude of ?
77 A man goes for a walk, starting from the origin of an xyz
coordinate system, with the xy plane horizontal and the x axis east-
ward. Carrying a bad penny, he walks 1300 m east, 2200 m north,
and then drops the penny from a cliff 410 m high. (a) In unit-vector
notation, what is the displacement of the penny from start to its
landing point? (b) When the man returns to the origin, what is the
magnitude of his displacement for the return trip?
78 What is the magnitude of ' ( ' ) if a " 3.90, b " 2.70,
and the angle between the two vectors is 63.0°?
79 In Fig. 3-38, the magnitude of is 4.3, the magnitude of is
5.4, and 4 " 46°. Find the area of the triangle contained between
the two vectors and the thin diagonal line.
b
:
a
:
a
:
b
:
a
:
A
:
A
:
A
:
B
:
b
:
a
:
b
:
a
:
b
:
a
:
b
:
a
:
b
:
a
:
" b
:
(a
:
# b
:
)
a
:
" b
:
b
:
a
:

Fundamentals of Physics "VECTORS"

More Related Content

What's hot

Similar to Fundamentals of Physics "VECTORS"

More from Leather Jackets & Coats

Recently uploaded

In this document

Fundamentals of Physics "VECTORS"