| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Correct the MIPS RISC-V/JEDEC vendor ID
- Fix the system shutdown behavior in the legacy case where
CONFIG_RISCV_SBI_V01 is set, but the firmware implementation
doesn't support the older v0.1 system shutdown method
- Align some tools/ macro definitions with the corresponding
kernel headers
* tag 'riscv-for-linus-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
tools: riscv: Fixed misalignment of CSR related definitions
riscv: sbi: Prefer SRST shutdown over legacy
riscv: Update MIPS vendor id to 0x127
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPsec and wireless.
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures"
* tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
vsock: Ignore signal/timeout on connect() if already established
be2net: pass wrb_params in case of OS2BMC
l2tp: reset skb control buffer on xmit
net: dsa: microchip: lan937x: Fix RGMII delay tuning
selftests: mptcp: add a check for 'add_addr_accepted'
mptcp: fix address removal logic in mptcp_pm_nl_rm_addr
selftests: mptcp: join: userspace: longer timeout
selftests: mptcp: join: endpoints: longer timeout
selftests: mptcp: join: fastclose: remove flaky marks
mptcp: fix duplicate reset on fastclose
mptcp: decouple mptcp fastclose from tcp close
mptcp: do not fallback when OoO is present
mptcp: fix premature close in case of fallback
mptcp: avoid unneeded subflow-level drops
mptcp: fix ack generation for fallback msk
wifi: rtw89: hw_scan: Don't let the operating channel be last
net: phylink: add missing supported link modes for the fixed-link
selftest: af_unix: Add test for SO_PEEK_OFF.
af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().
net/mlx5: Clean up only new IRQ glue on request_irq() failure
...
|
|
The previous patch fixed an issue with the 'add_addr_accepted' counter.
This was not spot by the test suite.
Check this counter and 'add_addr_signal' in MPTCP Join 'delete re-add
signal' test. This should help spotting similar regressions later on.
These counters are crucial for ensuring the MPTCP path manager correctly
handles the subflow creation via 'ADD_ADDR'.
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-11-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all userspace tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 290493078b96 ("selftests: mptcp: join: userspace: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-9-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rare cases, when the test environment is very slow, some endpoints
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all endpoints tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 6457595db987 ("selftests: mptcp: join: endpoints: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-8-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After recent fixes like the parent commit, and "selftests: mptcp:
connect: trunc: read all recv data", the two fastclose subtests no
longer look flaky any more.
It then feels fine to remove these flaky marks, to no longer ignore
these subtests in case of errors.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-7-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test covers various cases to verify SO_PEEK_OFF behaviour
for all AF_UNIX socket types.
two_chunks_blocking and two_chunks_overlap_blocking reproduce
the issue mentioned in the previous patch.
Without the patch, the two tests fail:
# RUN so_peek_off.stream.two_chunks_blocking ...
# so_peek_off.c:121:two_chunks_blocking:Expected 'bbbb' == 'aaaabbbb'.
# two_chunks_blocking: Test terminated by assertion
# FAIL so_peek_off.stream.two_chunks_blocking
not ok 3 so_peek_off.stream.two_chunks_blocking
# RUN so_peek_off.stream.two_chunks_overlap_blocking ...
# so_peek_off.c:159:two_chunks_overlap_blocking:Expected 'bbbb' == 'aaaabbbb'.
# two_chunks_overlap_blocking: Test terminated by assertion
# FAIL so_peek_off.stream.two_chunks_overlap_blocking
not ok 5 so_peek_off.stream.two_chunks_overlap_blocking
With the patch, all tests pass:
# PASSED: 15 / 15 tests passed.
# Totals: pass:15 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251117174740.3684604-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ret_set_ksft_status() calls ksft_status_merge() with the current return
status and the last one. It treats a non-zero return code from
ksft_status_merge() as an indication that the return status was
overwritten by the last one and therefore overwrites the return message
with the last one.
Currently, ksft_status_merge() returns a non-zero return code even if
the current return status and the last one are equal. This results in
return messages being overwritten which is counter-productive since we
are more interested in the first failure message and not the last one.
Fix by changing ksft_status_merge() to only return a non-zero return
code if the current return status was actually changed.
Add a test case which checks that the first error message is not
overwritten.
Before:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [FAIL]
retmsg=tfail expected tfail2
[...]
# echo $?
1
After:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [ OK ]
[...]
# echo $?
0
Fixes: 596c8819cb78 ("selftests: forwarding: Have RET track kselftest framework constants")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251116081029.69112-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix writing bpf_prog (infos|btfs)_cnt to data file, to not generate
invalid perf.data files in some corner cases.
- Fix 'perf top' segfault by ensuring libbfd is initialized. This is an
opt-in feature due to license incompatibilities.
- Fix segfault in 'perf lock' due to missing kernel map.
- Fix 'perf lock contention' test.
- Don't fail fast path detection if binutils-devel isn't available.
- Sync KVM's vmx.h with the kernel to pick SEAMCALL exit reason.
* tag 'perf-tools-fixes-for-v6.18-2-2025-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf libbfd: Ensure libbfd is initialized prior to use
perf test: Fix lock contention test
perf lock: Fix segfault due to missing kernel map
tools headers UAPI: Sync KVM's vmx.h with the kernel to pick SEAMCALL exit reason
perf build: Don't fail fast path feature detection when binutils-devel is not available
perf header: Write bpf_prog (infos|btfs)_cnt to data file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 hotfixes. 5 are cc:stable, 4 are against mm/
All are singletons - please see the respective changelogs for details"
* tag 'mm-hotfixes-stable-2025-11-16-10-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm, swap: fix potential UAF issue for VMA readahead
selftests/user_events: fix type cast for write_index packed member in perf_test
lib/test_kho: check if KHO is enabled
mm/huge_memory: fix folio split check for anon folios in swapcache
MAINTAINERS: update David Hildenbrand's email address
crash: fix crashkernel resource shrink
mm: fix MAX_FOLIO_ORDER on powerpc configs with hugetlb
|
|
The file tools/arch/riscv/include/asm/csr.h borrows from
arch/riscv/include/asm/csr.h, and subsequent modifications
related to CSR should maintain consistency.
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Link: https://patch.msgid.link/20251114071215.816-1-cp0613@linux.alibaba.com
[pjw@kernel.org: dropped Fixes: lines for patches that weren't broken; removed superfluous blank line]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Accessing 'reg.write_index' directly triggers a -Waddress-of-packed-member
warning due to potential unaligned pointer access:
perf_test.c:239:38: warning: taking address of packed member 'write_index'
of class or structure 'user_reg' may result in an unaligned pointer value
[-Waddress-of-packed-member]
239 | ASSERT_NE(-1, write(self->data_fd, ®.write_index,
| ^~~~~~~~~~~~~~~
Since write(2) works with any alignment. Casting '®.write_index'
explicitly to 'void *' to suppress this warning.
Link: https://lkml.kernel.org/r/20251106095532.15185-1-ankitkhushwaha.linux@gmail.com
Fixes: 42187bdc3ca4 ("selftests/user_events: Add perf self-test for empty arguments events")
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: sunliming <sunliming@kylinos.cn>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix interaction between livepatch and BPF fexit programs (Song Liu)
With Steven and Masami acks.
- Fix stack ORC unwind from BPF kprobe_multi (Jiri Olsa)
With Steven and Masami acks.
- Fix out of bounds access in widen_imprecise_scalars() in the verifier
(Eduard Zingerman)
- Fix conflicts between MPTCP and BPF sockmap (Jiayuan Chen)
- Fix net_sched storage collision with BPF data_meta/data_end (Eric
Dumazet)
- Add _impl suffix to BPF kfuncs with implicit args to avoid breaking
them in bpf-next when KF_IMPLICIT_ARGS is added (Mykyta Yatsenko)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test widen_imprecise_scalars() with different stack depth
bpf: account for current allocated stack depth in widen_imprecise_scalars()
bpf: Add bpf_prog_run_data_pointers()
selftests/bpf: Add mptcp test with sockmap
mptcp: Fix proto fallback detection with BPF
mptcp: Disallow MPTCP subflows from sockmap
selftests/bpf: Add stacktrace ips test for raw_tp
selftests/bpf: Add stacktrace ips test for kprobe_multi/kretprobe_multi
x86/fgraph,bpf: Fix stack ORC unwind from kprobe_multi return probe
Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"
bpf: add _impl suffix for bpf_stream_vprintk() kfunc
bpf:add _impl suffix for bpf_task_work_schedule* kfuncs
selftests/bpf: Add tests for livepatch + bpf trampoline
ftrace: bpf: Fix IPMODIFY + DIRECT in modify_ftrace_direct()
ftrace: Fix BPF fexit with livepatch
|
|
A test case for a situation when widen_imprecise_scalars() is called
with old->allocated_stack > cur->allocated_stack. Test structure:
def widening_stack_size_bug():
r1 = 0
for r6 in 0..1:
iterator_with_diff_stack_depth(r1)
r1 = 42
def iterator_with_diff_stack_depth(r1):
if r1 != 42:
use 128 bytes of stack
iterator based loop
iterator_with_diff_stack_depth() is verified with r1 == 0 first and
r1 == 42 next. Causing stack usage of 128 bytes on a first visit and 8
bytes on a second. Such arrangement triggered a KASAN error in
widen_imprecise_scalars().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251114025730.772723-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull VFIO seftest fixes from Alex Williamson:
- Fix vfio selftests to remove the expectation that the IOMMU supports
a 64-bit IOVA space.
These manifest both in the original set of tests introduced this
development cycle in identity mapping the IOVA to buffer virtual
address space, as well as the more recent boundary testing.
Implement facilities for collecting the valid IOVA ranges from the
backend, implement a simple IOVA allocator, and use the information
for determining extents (Alex Mastro)
* tag 'vfio-v6.18-rc6' of https://github.com/awilliam/linux-vfio:
vfio: selftests: replace iova=vaddr with allocated iovas
vfio: selftests: add iova allocator
vfio: selftests: fix map limit tests to use last available iova
vfio: selftests: add iova range query helpers
|
|
Add test cases to verify that when MPTCP falls back to plain TCP sockets,
they can properly work with sockmap.
Additionally, add test cases to ensure that sockmap correctly rejects
MPTCP sockets as expected.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251111060307.194196-4-jiayuan.chen@linux.dev
|
|
Multiple threads may be creating and destroying BFD objects in
situations like `perf top`.
Without appropriate initialization crashes may occur during libbfd's
cache management.
BFD's locks require recursive mutexes, add support for these.
Committer testing:
This happens only when building with 'make BUILD_NONDISTRO=1' and having
the binutils-devel package (or equivalent) installed, i.e. linking with
binutils devel files, an opt-in perf build.
Before:
root@x1:~# perf top
perf: Segmentation fault
-------- backtrace --------
<SNIP multiple failed attempts at printing a backtrace>
root@x1:~#
After this patch it works as before.
Closes: https://lore.kernel.org/lkml/aQt66zhfxSA80xwt@gentoo.org/
Fixes: 95931d9a594dd0b5 ("perf libbfd: Move libbfd functionality to its own file")
Reported-by: Guilherme Amadio <amadio@gentoo.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Couple of independent fixes:
1. Wire in SIGSEGV handler that terminates the test with a failure code.
2. Use "--lock-cgroup" instead of "-g"; "-g" was proposed but never
merged. See commit 4d1792d0a2564caf ("perf lock contention: Add
--lock-cgroup option")
3. Call cleanup() on every normal exit so trap_cleanup() doesn't mistake
it for an unexpected signal and emit a false-negative "Unexpected
signal in main" message.
Before patch:
# ./perf test -vv "lock contention"
85: kernel lock contention analysis test:
--- start ---
test child forked, pid 610711
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --lock-cgroup
Unexpected signal in test_aggr_cgroup
---- end(0) ----
85: kernel lock contention analysis test : Ok
After patch:
# ./perf test -vv "lock contention"
85: kernel lock contention analysis test:
--- start ---
test child forked, pid 602637
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --lock-cgroup
Testing perf lock contention --type-filter (w/ spinlock)
Testing perf lock contention --lock-filter (w/ tasklist_lock)
Testing perf lock contention --callstack-filter (w/ unix_stream)
[Skip] Could not find 'unix_stream'
Testing perf lock contention --callstack-filter with task aggregation
[Skip] Could not find 'unix_stream'
Testing perf lock contention --cgroup-filter
Testing perf lock contention CSV output
---- end(0) ----
85: kernel lock contention analysis test : Ok
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Tycho Andersen <tycho@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Kernel maps are encoded in PERF_RECORD_MMAP2 samples but "perf lock
report" and "perf lock contention" do not process MMAP2 samples.
Because of that, machine->vmlinux_map stays NULL and any later access
triggers a segmentation fault.
Fix it by adding ->mmap2() callbacks.
Fixes: 53b00ff358dc75b1 ("perf record: Make --buildid-mmap the default")
Reported-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Tested-by: Tycho Andersen (AMD) <tycho@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
reason
To pick the changes in:
9d7dfb95da2cb5c1 ("KVM: VMX: Inject #UD if guest tries to execute SEAMCALL or TDCALL")
The 'perf kvm-stat' tool uses the exit reasons that are included in the
VMX_EXIT_REASONS define, this new SEAMCALL isn't included there (TDCALL
is), so shouldn't be causing any change in behaviour, this patch ends up
being just addressess the following perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Please see tools/include/uapi/README for further details.
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
not available
This is one more remnant of the BUILD_NONDISTRO series to make building
with binutils-devel opt-in due to license incompatibility.
In this case just the references at link time were still in place, which
make building the test-all.bin file fail, which wasn't detected before
probably because the last test was done with binutils-devel available,
doh.
Now:
$ rpm -q binutils-devel
package binutils-devel is not installed
$ file /tmp/build/perf-tools/feature/test-all.bin
/tmp/build/perf-tools/feature/test-all.bin: ELF 64-bit LSB executable, x86-64, version 1 (SYSV),
dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2,
BuildID[sha1]=4b5388a346b51f1b993f0b0dbd49f4570769b03c, for GNU/Linux 3.2.0, not stripped
$
Fixes: 970ae86307718c34 ("perf build: The bfd features are opt-in, stop testing for them by default")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With commit f0d0f978f3f5830a ("perf header: Don't write empty BPF/BTF
info"), the write_bpf_( prog_info() | btf() ) functions exit without
writing anything if env->bpf_prog.(infos| btfs)_cnt is zero.
process_bpf_( prog_info() | btf() ), however, still expect a "count"
value to exist in the data file. If btf information is empty, for
example, process_bpf_btf will read garbage or some other data as the
number of btf nodes in the data file. As a result, the data file will
not be processed correctly.
Instead, write the count to the data file and exit if it is zero.
Fixes: f0d0f978f3f5830a ("perf header: Don't write empty BPF/BTF info")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Falcon <thomas.falcon@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"Fixes event-filter-function.tc tracing test failure caused when a
first run to sample events triggers kmem_cache_free which interferes
with the rest of the test.
Fix this by calling sample_events twice to eliminate the
kmem_cache_free related noise from the sampling"
* tag 'linux_kselftest-fixes-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/tracing: Run sample events to clear page cache events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth and Wireless. No known outstanding
regressions.
Current release - regressions:
- eth:
- bonding: fix mii_status when slave is down
- mlx5e: fix missing error assignment in mlx5e_xfrm_add_state()
Previous releases - regressions:
- sched: limit try_bulk_dequeue_skb() batches
- ipv4: route: prevent rt_bind_exception() from rebinding stale fnhe
- af_unix: initialise scc_index in unix_add_edge()
- netpoll: fix incorrect refcount handling causing incorrect cleanup
- bluetooth: don't hold spin lock over sleeping functions
- hsr: Fix supervision frame sending on HSRv0
- sctp: prevent possible shift out-of-bounds
- tipc: fix use-after-free in tipc_mon_reinit_self().
- dsa: tag_brcm: do not mark link local traffic as offloaded
- eth: virtio-net: fix incorrect flags recording in big mode
Previous releases - always broken:
- sched: initialize struct tc_ife to fix kernel-infoleak
- wifi:
- mac80211: reject address change while connecting
- iwlwifi: avoid toggling links due to wrong element use
- bluetooth: cancel mesh send timer when hdev removed
- strparser: fix signed/unsigned mismatch bug
- handshake: fix memory leak in tls_handshake_accept()
Misc:
- selftests: mptcp: fix some flaky tests"
* tag 'net-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
hsr: Follow standard for HSRv0 supervision frames
hsr: Fix supervision frame sending on HSRv0
virtio-net: fix incorrect flags recording in big mode
ipv4: route: Prevent rt_bind_exception() from rebinding stale fnhe
wifi: iwlwifi: mld: always take beacon ies in link grading
wifi: iwlwifi: mvm: fix beacon template/fixed rate
wifi: iwlwifi: fix aux ROC time event iterator usage
net_sched: limit try_bulk_dequeue_skb() batches
selftests: mptcp: join: properly kill background tasks
selftests: mptcp: connect: trunc: read all recv data
selftests: mptcp: join: userspace: longer transfer
selftests: mptcp: join: endpoints: longer transfer
selftests: mptcp: join: rm: set backup flag
selftests: mptcp: connect: fix fallback note due to OoO
ethtool: fix incorrect kernel-doc style comment in ethtool.h
mlx5: Fix default values in create CQ
Bluetooth: btrtl: Avoid loading the config file on security chips
net/mlx5e: Fix potentially misleading debug message
net/mlx5e: Fix wraparound in rate limiting for values above 255 Gbps
net/mlx5e: Fix maxrate wraparound in threshold between units
...
|
|
vfio_dma_mapping_test and vfio_pci_driver_test currently use iova=vaddr
as part of DMA mapping operations. However, not all IOMMUs support the
same virtual address width as the processor. For instance, older Intel
consumer platforms only support 39-bits of IOMMU address space. On such
platforms, using the virtual address as the IOVA fails.
Make the tests more robust by using iova_allocator to vend IOVAs, which
queries legally accessible IOVAs from the underlying IOMMUFD or VFIO
container.
Reviewed-by: David Matlack <dmatlack@google.com>
Tested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251111-iova-ranges-v3-4-7960244642c5@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Add struct iova_allocator, which gives tests a convenient way to generate
legally-accessible IOVAs to map. This allocator traverses the sorted
available IOVA ranges linearly, requires power-of-two size allocations,
and does not support freeing iova allocations. The assumption is that
tests are not IOVA space-bounded, and will not need to recycle IOVAs.
This is based on Alex Williamson's patch series for adding an IOVA
allocator [1].
[1] https://lore.kernel.org/all/20251108212954.26477-1-alex@shazbot.org/
Reviewed-by: David Matlack <dmatlack@google.com>
Tested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251111-iova-ranges-v3-3-7960244642c5@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Use the newly available vfio_pci_iova_ranges() to determine the last
legal IOVA, and use this as the basis for vfio_dma_map_limit_test tests.
Fixes: de8d1f2fd5a5 ("vfio: selftests: add end of address space DMA map/unmap tests")
Reviewed-by: David Matlack <dmatlack@google.com>
Tested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251111-iova-ranges-v3-2-7960244642c5@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
VFIO selftests need to map IOVAs from legally accessible ranges, which
could vary between hardware. Tests in vfio_dma_mapping_test.c are making
excessively strong assumptions about which IOVAs can be mapped.
Add vfio_iommu_iova_ranges(), which queries IOVA ranges from the
IOMMUFD or VFIO container associated with the device. The queried ranges
are normalized to IOMMUFD's iommu_iova_range representation so that
handling of IOVA ranges up the stack can be implementation-agnostic.
iommu_iova_range and vfio_iova_range are equivalent, so bias to using the
new interface's struct.
Query IOMMUFD's ranges with IOMMU_IOAS_IOVA_RANGES.
Query VFIO container's ranges with VFIO_IOMMU_GET_INFO and
VFIO_IOMMU_TYPE1_INFO_CAP_IOVA_RANGE.
The underlying vfio_iommu_type1_info buffer-related functionality has
been kept generic so the same helpers can be used to query other
capability chain information, if needed.
Reviewed-by: David Matlack <dmatlack@google.com>
Tested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251111-iova-ranges-v3-1-7960244642c5@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
The 'run_tests' function is executed in the background, but killing its
associated PID would not kill the children tasks running in the
background.
To properly kill all background tasks, 'kill -- -PID' could be used, but
this requires kill from procps-ng. Instead, all children tasks are
listed using 'ps', and 'kill' is called with all PIDs of this group.
Fixes: 31ee4ad86afd ("selftests: mptcp: join: stop transfer when check is done (part 1)")
Cc: stable@vger.kernel.org
Fixes: 04b57c9e096a ("selftests: mptcp: join: stop transfer when check is done (part 2)")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-6-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MPTCP Join "fastclose server" selftest is sometimes failing because the
client output file doesn't have the expected size, e.g. 296B instead of
1024B.
When looking at a packet trace when this happens, the server sent the
expected 1024B in two parts -- 100B, then 924B -- then the MP_FASTCLOSE.
It is then strange to see the client only receiving 296B, which would
mean it only got a part of the second packet. The problem is then not on
the networking side, but rather on the data reception side.
When mptcp_connect is launched with '-f -1', it means the connection
might stop before having sent everything, because a reset has been
received. When this happens, the program was directly stopped. But it is
also possible there are still some data to read, simply because the
previous 'read' step was done with a buffer smaller than the pending
data, see do_rnd_read(). In this case, it is important to read what's
left in the kernel buffers before stopping without error like before.
SIGPIPE is now ignored, not to quit the app before having read
everything.
Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-5-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to make the
connection longer. This connection will be killed at the end, after the
verifications, so making it longer doesn't change anything, apart from
avoid it to end before the end of the verifications
To play it safe, all userspace tests not waiting for the end of the
transfer are now sharing a longer file (128KB) at slow speed.
Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow")
Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow")
Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-4-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to make the
connection longer. This connection will be killed at the end, after the
verifications, so making it longer doesn't change anything, apart from
avoid it to end before the end of the verifications
To play it safe, all endpoints tests not waiting for the end of the
transfer are now sharing a longer file (128KB) at slow speed.
Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases")
Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd")
Fixes: e06959e9eebd ("selftests: mptcp: join: test for flush/re-add endpoints")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-3-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some of these 'remove' tests rarely fail because a subflow has been
reset instead of cleanly removed. This can happen when one extra subflow
which has never carried data is being closed (FIN) on one side, while
the other is sending data for the first time.
To avoid such subflows to be used right at the end, the backup flag has
been added. With that, data will be only carried on the initial subflow.
Fixes: d2c4333a801c ("selftests: mptcp: add testcases for removing addrs")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "fallback due to TCP OoO" was never printed because the stat_ooo_now
variable was checked twice: once in the parent if-statement, and one in
the child one. The second condition was then always true then, and the
'else' branch was never taken.
The idea is that when there are more ACK + MP_CAPABLE than expected, the
test either fails if there was no out of order packets, or a notice is
printed.
Fixes: 69ca3d29a755 ("mptcp: update selftest for fallback due to OoO")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-1-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds a selftest that verifies netconsole functionality
over bonded network interfaces using netdevsim. It sets up two bonded
interfaces acting as transmit (TX) and receive (RX) ends, placed in
separate network namespaces. The test sends kernel log messages and
verifies that they are properly received on the bonded RX interfaces
with both IPv4 and IPv6, and using basic and extended netconsole
formats.
This patchset aims to test a long-standing netpoll subsystem where
netpoll has multiple users. (in this case netconsole and bonding). A
similar selftest has been discussed in [1] and [2].
This test also tries to enable bonding and netpoll in different order,
just to guarantee that all the possibilities are exercised.
Link: https://lore.kernel.org/all/20250905-netconsole_torture-v3-0-875c7febd316@debian.org/ [1]
Link: https://lore.kernel.org/lkml/96b940137a50e5c387687bb4f57de8b0435a653f.1404857349.git.decot@googlers.com/ [2]
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251107-netconsole_torture-v10-4-749227b55f63@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a netconsole test that puts a lot of pressure on the netconsole
list manipulation. Do it by creating dynamic targets and deleting
targets while messages are being sent. Also put interface down while the
messages are being sent, as creating parallel targets.
The code launches three background jobs on distinct schedules:
* Toggle netcons target every 30 iterations
* create and delete random_target every 50 iterations
* toggle iface every 70 iterations
This creates multiple concurrency sources that interact with netconsole
states. This is good practice to simulate stress, and exercise netpoll
and netconsole locks.
This test already found an issue as reported in [1]
Link: https://lore.kernel.org/all/20250901-netpoll_memleak-v1-1-34a181977dfc@debian.org/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251107-netconsole_torture-v10-3-749227b55f63@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extract the netconsole target creation from create_dynamic_target(), by
moving it from create_dynamic_target() into a new helper function. This
enables other tests to use the creation of netconsole targets with
arbitrary parameters and no sleep.
The new helper will be utilized by forthcoming torture-type selftests
that require dynamic target management.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251107-netconsole_torture-v10-2-749227b55f63@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When freeing indexed arrays, the corresponding free function should
be called for each entry of the indexed array. For example, for
for 'struct tc_act_attrs' 'tc_act_attrs_free(...)' needs to be called
for each entry.
Previously, memory leaks were reported when enabling the ASAN
analyzer.
=================================================================
==874==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67
#1 0x55c98db048af in tc_act_attrs_set_options_vlan_parms ../generated/tc-user.h:2813
#2 0x55c98db048af in main ./linux/tools/net/ynl/samples/tc-filter-add.c:71
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67
#1 0x55c98db04a93 in tc_act_attrs_set_options_vlan_parms ../generated/tc-user.h:2813
#2 0x55c98db04a93 in main ./linux/tools/net/ynl/samples/tc-filter-add.c:74
Direct leak of 10 byte(s) in 2 object(s) allocated from:
#0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67
#1 0x55c98db0527d in tc_act_attrs_set_kind ../generated/tc-user.h:1622
SUMMARY: AddressSanitizer: 58 byte(s) leaked in 4 allocation(s).
The following diff illustrates the changes introduced compared to the
previous version of the code.
void tc_flower_attrs_free(struct tc_flower_attrs *obj)
{
+ unsigned int i;
+
free(obj->indev);
+ for (i = 0; i < obj->_count.act; i++)
+ tc_act_attrs_free(&obj->act[i]);
free(obj->act);
free(obj->key_eth_dst);
free(obj->key_eth_dst_mask);
Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251106151529.453026-3-zahari.doychev@linux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tracing selftest "event-filter-function.tc" was failing because it
first runs the "sample_events" function that triggers the kmem_cache_free
event and it looks at what function was used during a call to "ls".
But the first time it calls this, it could trigger events that are used to
pull pages into the page cache.
The rest of the test uses the function it finds during that call to see if
it will be called in subsequent "sample_events" calls. But if there's no
need to pull pages into the page cache, it will not trigger that function
and the test will fail.
Call the "sample_events" twice to trigger all the page cache work before
it calls it to find a function to use in subsequent checks.
Cc: stable@vger.kernel.org
Fixes: eb50d0f250e96 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
qdiscs
In response to Wang's bug report [1], add the following test cases:
- Try and fail to add an fq child to an ingress qdisc
- Try and fail to add an fq child to a clsact qdisc
[1] https://lore.kernel.org/netdev/20251105022213.1981982-1-wangliang74@huawei.com/
Reviewed-by: Pedro Tammela <pctammela@mojatatu.ai>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Cong Wang <cwang@multikernel.io>
Link: https://patch.msgid.link/20251106205621.3307639-2-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Fix trapping regression when no in-kernel irqchip is present
- Check host-provided, untrusted ranges and offsets in pKVM
- Fix regression restoring the ID_PFR1_EL1 register
- Fix vgic ITS locking issues when LPIs are not directly injected
Arm selftests:
- Correct target CPU programming in vgic_lpi_stress selftest
- Fix exposure of SCTLR2_EL2 and ZCR_EL2 in get-reg-list selftest
RISC-V:
- Fix check for local interrupts on riscv32
- Read HGEIP CSR on the correct cpu when checking for IMSIC
interrupts
- Remove automatic I/O mapping from kvm_arch_prepare_memory_region()
x86:
- Inject #UD if the guest attempts to execute SEAMCALL or TDCALL as
KVM doesn't support virtualization the instructions, but the
instructions are gated only by VMXON. That is, they will VM-Exit
instead of taking a #UD and until now this resulted in KVM exiting
to userspace with an emulation error.
- Unload the "FPU" when emulating INIT of XSTATE features if and only
if the FPU is actually loaded, instead of trying to predict when
KVM will emulate an INIT (CET support missed the MP_STATE path).
Add sanity checks to detect and harden against similar bugs in the
future.
- Unregister KVM's GALog notifier (for AVIC) when kvm-amd.ko is
unloaded.
- Use a raw spinlock for svm->ir_list_lock as the lock is taken
during schedule(), and "normal" spinlocks are sleepable locks when
PREEMPT_RT=y.
- Remove guest_memfd bindings on memslot deletion when a gmem file is
dying to fix a use-after-free race found by syzkaller.
- Fix a goof in the EPT Violation handler where KVM checks the wrong
variable when determining if the reported GVA is valid.
- Fix and simplify the handling of LBR virtualization on AMD, which
was made buggy and unnecessarily complicated by nested VM support
Misc:
- Update Oliver's email address"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
KVM: nSVM: Fix and simplify LBR virtualization handling with nested
KVM: nSVM: Always recalculate LBR MSR intercepts in svm_update_lbrv()
KVM: SVM: Mark VMCB_LBR dirty when MSR_IA32_DEBUGCTLMSR is updated
MAINTAINERS: Switch myself to using kernel.org address
KVM: arm64: vgic-v3: Release reserved slot outside of lpi_xa's lock
KVM: arm64: vgic-v3: Reinstate IRQ lock ordering for LPI xarray
KVM: arm64: Limit clearing of ID_{AA64PFR0,PFR1}_EL1.GIC to userspace irqchip
KVM: arm64: Set ID_{AA64PFR0,PFR1}_EL1.GIC when GICv3 is configured
KVM: arm64: Make all 32bit ID registers fully writable
KVM: VMX: Fix check for valid GVA on an EPT violation
KVM: guest_memfd: Remove bindings on memslot deletion when gmem is dying
KVM: SVM: switch to raw spinlock for svm->ir_list_lock
KVM: SVM: Make avic_ga_log_notifier() local to avic.c
KVM: SVM: Unregister KVM's GALog notifier on kvm-amd.ko exit
KVM: SVM: Initialize per-CPU svm_data at the end of hardware setup
KVM: x86: Call out MSR_IA32_S_CET is not handled by XSAVES
KVM: x86: Harden KVM against imbalanced load/put of guest FPU state
KVM: x86: Unload "FPU" state on INIT if and only if its currently in-use
KVM: arm64: Check the untrusted offset in FF-A memory share
KVM: arm64: Check range args for pKVM mem transitions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm654 fixes for 6.18, take #2
* Core fixes
- Fix trapping regression when no in-kernel irqchip is present
(20251021094358.1963807-1-sascha.bischoff@arm.com)
- Check host-provided, untrusted ranges and offsets in pKVM
(20251016164541.3771235-1-vdonnefort@google.com)
(20251017075710.2605118-1-sebastianene@google.com)
- Fix regression restoring the ID_PFR1_EL1 register
(20251030122707.2033690-1-maz@kernel.org
- Fix vgic ITS locking issues when LPIs are not directly injected
(20251107184847.1784820-1-oupton@kernel.org)
* Test fixes
- Correct target CPU programming in vgic_lpi_stress selftest
(20251020145946.48288-1-mdittgen@amazon.de)
- Fix exposure of SCTLR2_EL2 and ZCR_EL2 in get-reg-list selftest
(20251023-b4-kvm-arm64-get-reg-list-sctlr-el2-v1-1-088f88ff992a@kernel.org)
(20251024-kvm-arm64-get-reg-list-zcr-el2-v1-1-0cd0ff75e22f@kernel.org)
* Misc
- Update Oliver's email address
(20251107012830.1708225-1-oupton@kernel.org)
|
|
It seems that most of the tests prepare the interfaces once before the test
run (setup_prepare()), rely on setup_wait() to wait for link and only then
run the test(s).
local_termination brings the physical interfaces down and up during test
run but never wait for them to come up. If the auto-negotiation takes
some seconds, first test packets are being lost, which leads to
false-negative test results.
Use setup_wait() in run_test() to make sure auto-negotiation has been
completed after all simple_if_init() calls on physical interfaces and test
packets will not be lost because of the race against link establishment.
Fixes: 90b9566aa5cd3f ("selftests: forwarding: add a test for local_termination.sh")
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/20251106161213.459501-1-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- Syzkaller found a case where maths overflows can cause divide by 0
- Typo in a compiler bug warning fix in the selftests broke the
selftests
- type1 compatability had a mismatch when unmapping an already unmapped
range, it should succeed
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Make vfio_compat's unmap succeed if the range is already empty
iommufd/selftest: Fix ioctl return value in _test_cmd_trigger_vevents()
iommufd: Don't overflow during division for dirty tracking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Check for reader catching up in ring_buffer_map_get_reader()
If the reader catches up to the writer in the memory mapped ring
buffer then calling rb_get_reader_page() will return NULL as there's
no pages left. But this isn't checked for before calling
rb_get_reader_page() and the return of NULL causes a warning.
If it is detected that the reader caught up to the writer, then
simply exit the routine
- Fix memory leak in histogram create_field_var()
The couple of the error paths in create_field_var() did not properly
clean up what was allocated. Make sure everything is freed properly
on error
- Fix help message of tools latency_collector
The help message incorrectly stated that "-t" was the same as
"--threads" whereas "--threads" is actually represented by "-e"
* tag 'trace-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/tools: Fix incorrcet short option in usage text for --threads
tracing: Fix memory leaks in create_field_var()
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
|
|
The help message incorrectly listed '-t' as the short option for
--threads, but the actual getopt_long configuration uses '-e'.
This mismatch can confuse users and lead to incorrect command-line
usage. This patch updates the usage string to correctly show:
"-e, --threads NRTHR"
to match the implementation.
Note: checkpatch.pl reports a false-positive spelling warning on
'Run', which is intentional.
Link: https://patch.msgid.link/20251106031040.1869-1-zhangchujun@cmss.chinamobile.com
Signed-off-by: Zhang Chujun <zhangchujun@cmss.chinamobile.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Add James Clark as a perf tools reviewer
- Handle '1' type symbols in /proc/kallsyms, related to anonymous
Rust closures in the DRM panic QR encoder, caught by 'perf test'
- Sync kernel header copies: MSRs, uprobe syscall,
DRM_IOCTL_GEM_CHANGE_HANDLE, KVM exit reasons, etc
* tag 'perf-tools-fixes-for-v6.18-1-2025-11-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf symbols: Handle '1' symbols in /proc/kallsyms
tools headers asm: Sync fls headers header with the kernel sources
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources to handle new exit reasons
tools headers svm: Sync svm headers with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
MAINTAINERS: Add James Clark as a perf tools reviewer
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Update tools's copy of drm.h to pick DRM_IOCTL_GEM_CHANGE_HANDLE
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers x86: Sync table due to introducion of uprobe syscall
tools headers: Sync uapi/linux/fcntl.h with the kernel sources
tools headers: Sync uapi/linux/prctl.h with the kernel source
tools headers uapi: Update fs.h with the kernel sources
tools arch x86: Sync msr-index.h to pick AMD64_{PERF_CNTR_GLOBAL_STATUS_SET,SAVIC_CONTROL}, IA32_L3_QOS_{ABMC,EXT}_CFG
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
Including fixes from bluetooth and wireless.
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by
device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready
message" caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low
granularity of timers set relatively far in the future, and use it
where it matters (e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB,
multicast
- phy: lan8842: implement latest errata"
* tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
selftests/vsock: avoid false-positives when checking dmesg
net: bridge: fix MST static key usage
net: bridge: fix use-after-free due to MST port state bypass
lan966x: Fix sleeping in atomic context
bonding: fix NULL pointer dereference in actor_port_prio setting
net: dsa: microchip: Fix reserved multicast address table programming
net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
net: libwx: fix device bus LAN ID
net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
net/mlx5e: SHAMPO, Fix skb size check for 64K pages
net/mlx5e: SHAMPO, Fix header mapping for 64K pages
net: ti: icssg-prueth: Fix fdb hash size configuration
net/mlx5e: Fix return value in case of module EEPROM read error
net: gro_cells: Reduce lock scope in gro_cell_poll
libie: depend on DEBUG_FS when building LIBIE_FWLOG
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
netpoll: Fix deadlock in memory allocation under spinlock
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
virtio-net: fix received length check in big packets
bnxt_en: Fix warning in bnxt_dl_reload_down()
...
|
|
Sometimes VMs will have some intermittent dmesg warnings that are
unrelated to vsock. Change the dmesg parsing to filter on strings
containing 'vsock' to avoid false positive failures that are unrelated
to vsock. The downside is that it is possible for some vsock related
warnings to not contain the substring 'vsock', so those will be missed.
Fixes: a4a65c6fe08b ("selftests/vsock: add initial vmtest.sh for vsock")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251105-vsock-vmtest-dmesg-fix-v2-1-1a042a14892c@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adding test that verifies we get expected initial 2 entries from
stacktrace for rawtp probe via ORC unwind.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Adding test that attaches kprobe/kretprobe multi and verifies the
ORC stacktrace matches expected functions.
Adding bpf_testmod_stacktrace_test function to bpf_testmod kernel
module which is called through several functions so we get reliable
call path for stacktrace.
The test is only for ORC unwinder to keep it simple.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
iommufd returns ENOENT when attempting to unmap a range that is already
empty, while vfio type1 returns success. Fix vfio_compat to match.
Fixes: d624d6652a65 ("iommufd: vfio container FD ioctl compatibility")
Link: https://patch.msgid.link/r/0-v1-76be45eff0be+5d-iommufd_unmap_compat_jgg@nvidia.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Alex Mastro <amastro@fb.com>
Reported-by: Alex Mastro <amastro@fb.com>
Closes: https://lore.kernel.org/r/aP0S5ZF9l3sWkJ1G@devgpu012.nha5.facebook.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Rename bpf_stream_vprintk() to bpf_stream_vprintk_impl().
This makes bpf_stream_vprintk() follow the already established "_impl"
suffix-based naming convention for kfuncs with the bpf_prog_aux
argument provided by the verifier implicitly. This convention will be
taken advantage of with the upcoming KF_IMPLICIT_ARGS feature to
preserve backwards compatibility to BPF programs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251104-implv2-v3-2-4772b9ae0e06@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
|
|
Rename:
bpf_task_work_schedule_resume()->bpf_task_work_schedule_resume_impl()
bpf_task_work_schedule_signal()->bpf_task_work_schedule_signal_impl()
This aligns task work scheduling kfuncs with the established naming
scheme for kfuncs with the bpf_prog_aux argument provided by the
verifier implicitly. This convention will be taken advantage of with the
upcoming KF_IMPLICIT_ARGS feature to preserve backwards compatibility to
BPF programs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251104-implv2-v3-1-4772b9ae0e06@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
|
|
Both livepatch and BPF trampoline use ftrace. Special attention is needed
when livepatch and fexit program touch the same function at the same
time, because livepatch updates a kernel function and the BPF trampoline
need to call into the right version of the kernel function.
Use samples/livepatch/livepatch-sample.ko for the test.
The test covers two cases:
1) When a fentry program is loaded first. This exercises the
modify_ftrace_direct code path.
2) When a fentry program is loaded first. This exercises the
register_ftrace_direct code path.
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251027175023.1521602-4-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
I started seeing this in recent Fedora 42 kernels:
root@x1:~# uname -a
Linux x1 6.17.4-200.fc42.x86_64 #1 SMP PREEMPT_DYNAMIC Sun Oct 19 18:47:49 UTC 2025 x86_64 GNU/Linux
root@x1:~#
root@x1:~# perf test 1
1: vmlinux symtab matches kallsyms : FAILED!
root@x1:~#
Related to:
root@x1:~# grep ' 1 ' /proc/kallsyms
ffffffffb098bc00 1 __pfx__RNCINvNtNtNtCsfwaGRd4cjqE_4core4iter8adapters3map12map_try_foldjNtCskFudTml27HW_12drm_panic_qr7VersionuINtNtNtBa_3ops12control_flow11ControlFlowB10_ENcB10_0NCINvNvNtNtNtB8_6traits8iterator8Iterator4find5checkB10_NCNvMB12_B10_13from_segments0E0E0B12_
ffffffffb098bc10 1 _RNCINvNtNtNtCsfwaGRd4cjqE_4core4iter8adapters3map12map_try_foldjNtCskFudTml27HW_12drm_panic_qr7VersionuINtNtNtBa_3ops12control_flow11ControlFlowB10_ENcB10_0NCINvNvNtNtNtB8_6traits8iterator8Iterator4find5checkB10_NCNvMB12_B10_13from_segments0E0E0B12_
root@x1:~#
That is found in:
root@x1:~# pahole --running_kernel_vmlinux
/usr/lib/debug/lib/modules/6.17.4-200.fc42.x86_64/vmlinux
root@x1:~#
root@x1:~# readelf -sW /usr/lib/debug/lib/modules/6.17.4-200.fc42.x86_64/vmlinux | grep __pfx__RNCINvNtNtNtCsfwaGRd4cjqE_4core4iter8adapters3map12map_try_foldjNtCskFudTml27HW_12drm_panic_qr7VersionuINtNtNtBa_3ops12control_flow11ControlFlowB10_ENcB10_0NCINvNvNtNtNtB8_6traits8iterator8Iterator4find5checkB10_NCNvMB12_B10_13from_segments0E0E0B12_
150649: ffffffff81f8bc00 16 FUNC LOCAL DEFAULT 1 __pfx__RNCINvNtNtNtCsfwaGRd4cjqE_4core4iter8adapters3map12map_try_foldjNtCskFudTml27HW_12drm_panic_qr7VersionuINtNtNtBa_3ops12control_flow11ControlFlowB10_ENcB10_0NCINvNvNtNtNtB8_6traits8iterator8Iterator4find5checkB10_NCNvMB12_B10_13from_segments0E0E0B12_
root@x1:~#
But was being filtered out when reading /proc/kallsyms, as the '1'
symbol type was not being handled, do it, there are just two of them at
this point.
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Benno Lossin <lossin@kernel.org>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
6606c8c7e8188656 ("bitops: Add __attribute_const__ to generic ffs()-family implementations")
This addresses these tools build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/asm-generic/bitops/__fls.h include/asm-generic/bitops/__fls.h
diff -u tools/include/asm-generic/bitops/fls.h include/asm-generic/bitops/fls.h
diff -u tools/include/asm-generic/bitops/fls64.h include/asm-generic/bitops/fls64.h
Please see tools/include/uapi/README for further details.
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
handle new exit reasons
To pick the changes in:
885df2d2109a60f8 ("KVM: x86: Add support for RDMSR/WRMSRNS w/ immediate on Intel")
c42856af8f70d983 ("KVM: TDX: Add a place holder for handler of TDX hypercalls (TDG.VP.VMCALL)")
That makes 'perf kvm-stat' aware of these new TDCALL and
MSR_{READ,WRITE}_IMM exit reasons, thus addressing the following perf
build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Please see tools/include/uapi/README for further details.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Xin Li <xin@zytor.com>
Cc: Isaku Yamahata <isaku.yamahata@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
b8c3c9f5d0505905 ("x86/apic: Initialize Secure AVIC APIC backing page")
That triggers:
CC /tmp/build/perf-tools/arch/x86/util/kvm-stat.o
LD /tmp/build/perf-tools/arch/x86/util/perf-util-in.o
LD /tmp/build/perf-tools/arch/x86/perf-util-in.o
LD /tmp/build/perf-tools/arch/perf-util-in.o
LD /tmp/build/perf-tools/perf-util-in.o
AR /tmp/build/perf-tools/libperf-util.a
LINK /tmp/build/perf-tools/perf
But this time causes no changes in tooling results, as the introduced
SVM_VMGEXIT_SAVIC exit reason wasn't added to SVM_EXIT_REASONS, that is
used in kvm-stat.c.
And addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
Please see tools/include/uapi/README for further details.
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
fddd07626baa419c ("KVM: x86: Define AMD's #HV, #VC, and #SX exception vectors")
f2f5519aa4e3ec4e ("KVM: x86: Define Control Protection Exception (#CP) vector")
9d6812d415358372 ("KVM: x86: Enable guest SSP read/write interface with new uAPIs")
06f2969c6a1237f0 ("KVM: x86: Introduce KVM_{G,S}ET_ONE_REG uAPIs support")
That just rebuilds kvm-stat.c on x86, no change in functionality.
This silences these perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Yang Weijiang <weijiang.yang@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
fe2bf6234e947bf5 ("KVM: guest_memfd: Add INIT_SHARED flag, reject user page faults if not set")
d2042d8f96ddefde ("KVM: Rework KVM_CAP_GUEST_MEMFD_MMAP into KVM_CAP_GUEST_MEMFD_FLAGS")
3d3a04fad25a6621 ("KVM: Allow and advertise support for host mmap() on guest_memfd files")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the 'perf trace' ioctl syscall argument beautifiers.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Please see tools/include/uapi/README for further details.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
DRM_IOCTL_GEM_CHANGE_HANDLE
Picking the changes from:
0864197382fa7c8c ("drm: Move drm_gem ioctl kerneldoc to uapi file")
53096728b8910c69 ("drm: Add DRM prime interface to reassign GEM handle")
Addressing these perf build warnings:
Warning: Kernel ABI header differences:
Now 'perf trace' and other code that might use the tools/perf/trace/beauty
autogenerated tables will be able to translate this new ioctl command into
a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2025-11-03 09:57:34.832553174 -0300
+++ after 2025-11-03 09:57:47.969409428 -0300
@@ -111,6 +111,7 @@
[0xCF] = "SYNCOBJ_EVENTFD",
[0xD0] = "MODE_CLOSEFB",
[0xD1] = "SET_CLIENT_NAME",
+ [0xD2] = "GEM_CHANGE_HANDLE",
[DRM_COMMAND_BASE + 0x00] = "I915_INIT",
[DRM_COMMAND_BASE + 0x01] = "I915_FLUSH",
[DRM_COMMAND_BASE + 0x02] = "I915_FLIP",
$
Please see tools/include/uapi/README for further details.
Cc: Christian König <christian.koenig@amd.com>
Cc: David Francis <David.Francis@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
e19c06219985f2be ("x86/cpufeatures: Add support for Assignable Bandwidth Monitoring Counters (ABMC)")
7b59c73fd611eae8 ("x86/cpufeatures: Add SNP Secure TSC")
3c7cb84145336721 ("x86/cpufeatures: Add a CPU feature bit for MSR immediate form instructions")
2f8f173413f1cbf5 ("x86/vmscape: Add conditional IBPB mitigation")
a508cec6e5215a3f ("x86/vmscape: Enumerate VMSCAPE bug")
This causes these perf files to be rebuilt and brings some X86_FEATURE
that may be used by:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Please see tools/include/uapi/README for further details.
Cc: Babu Moger <babu.moger@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Nikunj A Dadhania <nikunj@amd.com>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Xin Li <xin@zytor.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in this cset:
56101b69c9190667 ("uprobes/x86: Add uprobe syscall to speed up uprobe")
That add support for this new 'uprobe' syscall in tools such as 'perf trace'.
Now it is possible to do a system wide 'perf trace' to look if this new
syscall is being used:
root@number:~# perf trace -v -e uprobe
<SNIP>
event qualifier tracepoint filter: (common_pid != 33989) && (id == 336)
^C
root@number#
$ grep -w uprobe tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
336 common uprobe sys_uprobe
$
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Please see tools/include/uapi/README for further details.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in this cset:
e83f0b5d10dcf628 ("nsfs: support exhaustive file handles")
That doesn't introduce anything of interest for tools/, just addresses
these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Please see tools/include/uapi/README for further details.
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in these csets:
8cdc4d27019356b0 ("mm/huge_memory: respect MADV_COLLAPSE with PR_THP_DISABLE_EXCEPT_ADVISED")
9dc21bbd62edeae6 ("prctl: extend PR_SET_THP_DISABLE to optionally exclude VM_HUGEPAGE")
That don't introduce anything of interest for the tools/, just
addressing these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Please see tools/include/uapi/README for further details.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up changes from:
db2ab24a341ce893 ("Add RWF_NOSIGNAL flag for pwritev2")
These are used to beautify fs syscall arguments, albeit the changes in
this update are not affecting those beautifiers.
This addresses these tools/ build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fs.h include/uapi/linux/fs.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lauri Vasama <git@vasama.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
AMD64_{PERF_CNTR_GLOBAL_STATUS_SET,SAVIC_CONTROL}, IA32_L3_QOS_{ABMC,EXT}_CFG
To pick up the changes in:
cdfed9370b96aaba ("KVM: x86/pmu: Move PMU_CAP_{FW_WRITES,LBR_FMT} into msr-index.h header")
bc6397cf0bc4f2b7 ("x86/cpu/topology: Define AMD64_CPUID_EXT_FEAT MSR")
84ecefb766748916 ("x86/resctrl: Add data structures and definitions for ABMC assignment")
faebbc58cde9d8f6 ("x86/resctrl: Add support to enable/disable AMD ABMC feature")
c4074ab87f3483de ("x86/apic: Enable Secure AVIC in the control MSR")
869e36b9660dd72a ("x86/apic: Allow NMI to be injected from hypervisor for Secure AVIC")
30c2b98aa84c76f2 ("x86/apic: Add new driver for Secure AVIC")
0c5caea762de31a8 ("perf/x86: Add PERF_CAP_PEBS_TIMING_INFO flag")
68e61f6fd65610e7 ("KVM: SVM: Emulate PERF_CNTR_GLOBAL_STATUS_SET for PerfMonV2")
a3c4f3396b82849a ("x86/msr-index: Add AMD workload classification MSRs")
65f55a30176662ee ("x86/CPU/AMD: Add CPUID faulting support")
17ec2f965344ee3f ("KVM: VMX: Allow guest to set DEBUGCTL.RTM_DEBUG if RTM is supported")
Addressing this tools/perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
That makes the beautification scripts to pick some new entries:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2025-10-30 09:34:49.283533597 -0300
+++ after 2025-10-30 09:35:00.971426811 -0300
@@ -272,6 +272,9 @@
[0xc0000300 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS",
[0xc0000301 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_CTL",
[0xc0000302 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS_CLR",
+ [0xc0000303 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS_SET",
+ [0xc00003fd - x86_64_specific_MSRs_offset] = "IA32_L3_QOS_ABMC_CFG",
+ [0xc00003ff - x86_64_specific_MSRs_offset] = "IA32_L3_QOS_EXT_CFG",
[0xc0000400 - x86_64_specific_MSRs_offset] = "IA32_EVT_CFG_BASE",
[0xc0000500 - x86_64_specific_MSRs_offset] = "AMD_WORKLOAD_CLASS_CONFIG",
[0xc0000501 - x86_64_specific_MSRs_offset] = "AMD_WORKLOAD_CLASS_ID",
@@ -319,6 +322,7 @@
[0xc0010133 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_RMP_END",
[0xc0010134 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_GUEST_TSC_FREQ",
[0xc0010136 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_RMP_CFG",
+ [0xc0010138 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SAVIC_CONTROL",
[0xc0010140 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_OSVW_ID_LENGTH",
[0xc0010141 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_OSVW_STATUS",
[0xc0010200 - x86_AMD_V_KVM_MSRs_offset] = "F15H_PERF_CTL",
$
Now one can trace systemwide asking to see backtraces to where that MSR
is being read/written:
root@x1:~# perf trace -e msr:*_msr/max-stack=32/ --filter="msr==IA32_L3_QOS_ABMC_CFG"
^Croot@x1:~#
If we use -v (verbose mode) we can see what it does behind the scenes:
root@x1:~# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_L3_QOS_ABMC_CFG"
0xc00003fd
New filter for msr:write_msr: (msr==0xc00003fd) && (common_pid != 449842 && common_pid != 433756)
0xc00003fd
New filter for msr:read_msr: (msr==0xc00003fd) && (common_pid != 449842 && common_pid != 433756)
mmap size 528384B
^Croot@x1:~#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Please see tools/include/uapi/README for further details.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Cc: Perry Yuan <perry.yuan@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If an insn->alt points to a STAC/CLAC instruction, skip_alt_group()
assumes it's part of an alternative ("alt group") as opposed to some
other kind of "alt" such as an exception fixup.
While that assumption may hold true in the current code base, Linus has
an out-of-tree patch which breaks that assumption by replacing the
STAC/CLAC alternatives with raw STAC/CLAC instructions.
Make skip_alt_group() more robust by making sure it's actually an alt
group before continuing.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 2d12c6fb7875 ("objtool: Remove ANNOTATE_IGNORE_ALTERNATIVE from CLAC/STAC")
Closes: https://lore.kernel.org/CAHk-=wi6goUT36sR8GE47_P-aVrd5g38=VTRHpktWARbyE-0ow@mail.gmail.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://patch.msgid.link/3d22415f7b8e06a64e0873b21f48389290eeaa49.1761767616.git.jpoimboe@kernel.org
|
|
Pull bpf fixes from Alexei Starovoitov:
- Mark migrate_disable/enable() as always_inline to avoid issues with
partial inlining (Yonghong Song)
- Fix powerpc stack register definition in libbpf bpf_tracing.h (Andrii
Nakryiko)
- Reject negative head_room in __bpf_skb_change_head (Daniel Borkmann)
- Conditionally include dynptr copy kfuncs (Malin Jonsson)
- Sync pending IRQ work before freeing BPF ring buffer (Noorain Eqbal)
- Do not audit capability check in x86 do_jit() (Ondrej Mosnacek)
- Fix arm64 JIT of BPF_ST insn when it writes into arena memory
(Puranjay Mohan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/arm64: Fix BPF_ST into arena memory
bpf: Make migrate_disable always inline to avoid partial inlining
bpf: Reject negative head_room in __bpf_skb_change_head
bpf: Conditionally include dynptr copy kfuncs
libbpf: Fix powerpc's stack register definition in bpf_tracing.h
bpf: Do not audit capability check in do_jit()
bpf: Sync pending IRQ work before freeing ring buffer
|
|
ethtool-common.sh
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Fixes: fbb8531e58bd ("selftests: extract common functions in ethtool-common.sh")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GRO self-test, gro.c, currently constructs IPv6 packets containing a
Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path
correctly handles IPv6 extension headers.
However, network elements may be configured to drop packets with the
Hop-by-Hop Options header (HBH). This causes the self-test to fail
in environments where such network elements are present.
To improve the robustness and reliability of this test in diverse
network environments, switch from using IPPROTO_HOPOPTS to
IPPROTO_DSTOPTS (Destination Options).
The Destination Options header is less likely to be dropped by
intermediate routers and still serves the core purpose of the test:
validating GRO's handling of an IPv6 extension header. This change
ensures the test can execute successfully without being incorrectly
failed by network policies outside the kernel's control.
Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Due to the gro_sender sending data packets and FIN packets
in very quick succession, these are received almost simultaneously
by the gro_receiver. FIN packets are sometimes processed before the
data packets leading to intermittent (~1/100) test failures.
This change adds a delay of 100ms before sending FIN packets
in gro:tcp test to avoid the out-of-order delivery. The same
mitigation already exists for the gro:ip test.
Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030062818.1562228-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull VFIO fixes from Alex Williamson:
- Fix overflows in vfio type1 backend for mappings at the end of the
64-bit address space, resulting in leaked pinned memory.
New selftest support included to avoid such issues in the future
(Alex Mastro)
* tag 'vfio-v6.18-rc4' of https://github.com/awilliam/linux-vfio:
vfio: selftests: add end of address space DMA map/unmap tests
vfio: selftests: update DMA map/unmap helpers to support more test kinds
vfio/type1: handle DMA map/unmap up to the addressable limit
vfio/type1: move iova increment to unmap_unpin_*() caller
vfio/type1: sanitize for overflow using check_*_overflow()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fix build warning in cachestat found during clang build and add
tmpshmcstat to .gitignore"
* tag 'linux_kselftest-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: cachestat: Fix warning on declaration under label
selftests/cachestat: add tmpshmcstat file to .gitignore
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless, Bluetooth and netfilter.
Current release - regressions:
- tcp: fix too slow tcp_rcvbuf_grow() action
- bluetooth: fix corruption in h4_recv_buf() after cleanup
Previous releases - regressions:
- mptcp: restore window probe
- bluetooth:
- fix connection cleanup with BIG with 2 or more BIS
- fix crash in set_mesh_sync and set_mesh_complete
- batman-adv: release references to inactive interfaces
- nic:
- ice: fix usage of logical PF id
- sfc: fix potential memory leak in efx_mae_process_mport()
Previous releases - always broken:
- devmem: refresh devmem TX dst in case of route invalidation
- netfilter: add seqadj extension for natted connections
- wifi:
- iwlwifi: fix potential use after free in iwl_mld_remove_link()
- brcmfmac: fix crash while sending action frames in standalone AP Mode
- eth:
- mlx5e: cancel tls RX async resync request in error flows
- ixgbe: fix memory leak and use-after-free in ixgbe_recovery_probe()
- hibmcge: fix rx buf avl irq is not re-enabled in irq_handle issue
- cxgb4: fix potential use-after-free in ipsec callback
- nfp: fix memory leak in nfp_net_alloc()"
* tag 'net-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
net: sctp: fix KMSAN uninit-value in sctp_inq_pop
net: devmem: refresh devmem TX dst in case of route invalidation
net: stmmac: est: Fix GCL bounds checks
net: stmmac: Consider Tx VLAN offload tag length for maxSDU
net: stmmac: vlan: Disable 802.1AD tag insertion offload
net/mlx5e: kTLS, Cancel RX async resync request in error flows
net: tls: Cancel RX async resync request on rcd_delta overflow
net: tls: Change async resync helpers argument
net: phy: dp83869: fix STRAP_OPMODE bitmask
selftests: net: use BASH for bareudp testing
net: mctp: Fix tx queue stall
net/mlx5: Don't zero user_count when destroying FDB tables
net: usb: asix_devices: Check return value of usbnet_get_endpoints
mptcp: zero window probe mib
mptcp: restore window probe
mptcp: fix MSG_PEEK stream corruption
mptcp: drop bogus optimization in __mptcp_check_push()
netconsole: Fix race condition in between reader and writer of userdata
Documentation: netconsole: Remove obsolete contact people
nfp: xsk: fix memory leak in nfp_net_alloc()
...
|
|
get-reg-list includes ZCR_EL2 in the list of EL2 registers that it looks
for when NV is enabled but does not have any feature gate for this register,
meaning that testing any combination of features that includes EL2 but does
not include SVE will result in a test failure due to a missing register
being reported:
| The following lines are missing registers:
|
| ARM64_SYS_REG(3, 4, 1, 2, 0),
Add ZCR_EL2 to feat_id_regs so that the test knows not to expect to see it
without SVE being enabled.
Fixes: 3a90b6f27964 ("KVM: arm64: selftests: get-reg-list: Add base EL2 registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20251024-kvm-arm64-get-reg-list-zcr-el2-v1-1-0cd0ff75e22f@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We recently added support for SCTLR2_EL2 to the kernel but did not add it
to get-reg-list, resulting in it reporting the missing register when it
is available. Add it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20251023-b4-kvm-arm64-get-reg-list-sctlr-el2-v1-1-088f88ff992a@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since GITS_TYPER.PTA == 0, the ITS MAPC command demands a CPU ID,
rather than a physical redistributor address, for its RDbase
command argument.
As such, when MAPC-ing guest ITS collections, vgic_lpi_stress iterates
over CPU IDs in the range [0, nr_cpus), passing them as the RDbase
vcpu_id argument to its_send_mapc_cmd().
However, its_encode_target() in the its_send_mapc_cmd() selftest
handler expects RDbase arguments to be formatted with a 16 bit
offset, as shown by the 16-bit target_addr right shift its implementation:
its_mask_encode(&cmd->raw_cmd[2], target_addr >> 16, 51, 16)
At the moment, all CPU IDs passed into its_send_mapc_cmd() have no
offset, therefore becoming 0x0 after the bit shift. Thus, when
vgic_its_cmd_handle_mapc() receives the ITS command in vgic-its.c,
it always interprets the RDbase target CPU as CPU 0. All interrupts
sent to collections will be processed by vCPU 0, which defeats the
purpose of this multi-vCPU test.
Fix by creating procnum_to_rdbase() helper function, which left-shifts
the vCPU parameter received by its_send_mapc_cmd 16 bits before passing
it to its_encode_target for encoding.
Signed-off-by: Maximilian Dittgen <mdittgen@amazon.de>
Link: https://patch.msgid.link/20251020145946.48288-1-mdittgen@amazon.de
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In bareudp.sh, this script uses /bin/sh and it will load another lib.sh
BASH script at the very beginning.
But on some operating systems like Ubuntu, /bin/sh is actually pointed to
DASH, thus it will try to run BASH commands with DASH and consequently
leads to syntax issues:
# ./bareudp.sh: 4: ./lib.sh: Bad substitution
# ./bareudp.sh: 5: ./lib.sh: source: not found
# ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected
Fix this by explicitly using BASH for bareudp.sh. This fixes test
execution failures on systems where /bin/sh is not BASH.
Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com>
Link: https://bugs.launchpad.net/bugs/2129812
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests which validate dma map/unmap at the end of address space. Add
negative test cases for checking that overflowing ioctl args fail with
the expected errno.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251028-fix-unmap-v6-5-2542b96bcc8e@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Add __vfio_pci_dma_*() helpers which return -errno from the underlying
ioctls.
Add __vfio_pci_dma_unmap_all() to test more unmapping code paths. Add an
out unmapped arg to report the unmapped byte size.
The existing vfio_pci_dma_*() functions, which are intended for
happy-path usage (assert on failure) are now thin wrappers on top of the
double-underscore helpers.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251028-fix-unmap-v6-4-2542b96bcc8e@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
When request a none support device operation, there will be no reply.
In this case, the len(desc) check will always be true, causing print_field
to enter an infinite loop and crash the program. Example reproducer:
# ethtool.py -c veth0
To fix this, return immediately if there is no reply.
Fixes: f3d07b02b2b8 ("tools: ynl: ethtool testing tool")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251024125853.102916-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ynl_attr_put_str() function was not including the null terminator
in the attribute length calculation. This caused kernel to reject
CTRL_CMD_GETFAMILY requests with EINVAL:
"Attribute failed policy validation".
For a 4-character family name like "dpll":
- Sent: nla_len=8 (4 byte header + 4 byte string without null)
- Expected: nla_len=9 (4 byte header + 5 byte string with null)
The bug was introduced in commit 15d2540e0d62 ("tools: ynl: check for
overflow of constructed messages") when refactoring from stpcpy() to
strlen(). The original code correctly included the null terminator:
end = stpcpy(ynl_attr_data(attr), str);
attr->nla_len = NLA_HDRLEN + NLA_ALIGN(end -
(char *)ynl_attr_data(attr));
Since stpcpy() returns a pointer past the null terminator, the length
included it. The refactored version using strlen() omitted the +1.
The fix also removes NLA_ALIGN() from nla_len calculation, since
nla_len should contain actual attribute length, not aligned length.
Alignment is only for calculating next attribute position. This makes
the code consistent with ynl_attr_put().
CTRL_ATTR_FAMILY_NAME uses NLA_NUL_STRING policy which requires
null terminator. Kernel validates with memchr() and rejects if not
found.
Fixes: 15d2540e0d62 ("tools: ynl: check for overflow of constructed messages")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Link: https://lore.kernel.org/20251018151737.365485-3-zahari.doychev@linux.com
Link: https://patch.msgid.link/20251024132438.351290-1-poros@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Fix x32 build due to wrong format specifier on that sub-arch
- Add one more Rust noreturn function to objtool's list
* tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix failure when being compiled on x32 system
objtool/rust: add one more `noreturn` Rust function
|
|
retsnoop's build on powerpc (ppc64le) architecture ([0]) failed due to
wrong definition of PT_REGS_SP() macro. Looking at powerpc's
implementation of stack unwinding in perf_callchain_user_64() clearly
shows that stack pointer register is gpr[1].
Fix libbpf's definition of __PT_SP_REG for powerpc to fix all this.
[0] https://kojipkgs.fedoraproject.org/work/tasks/1544/137921544/build.log
Fixes: 138d6153a139 ("samples/bpf: Enable powerpc support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/20251020203643.989467-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
|
|
Fix warning caused from declaration under a case label. The proper way
is to declare variable at the beginning of the function. The warning
came from running clang using LLVM=1; and is as follows:
-test_cachestat.c:260:3: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
260 | char *map = mmap(NULL, filesize, PROT_READ | PROT_WRITE,
|
Link: https://lore.kernel.org/r/20250929115405.25695-2-sidharthseela@gmail.com
Signed-off-by: Sidharth Seela <sidharthseela@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add the tmpshmcstat file to .gitignore to avoid
accidentally staging the build artifact
Link: https://lore.kernel.org/r/20251013095149.1386628-1-madhurkumar004@gmail.com
Signed-off-by: Madhur Kumar <madhurkumar004@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Fix compilation failure when compiling the kernel with the x32 toolchain.
In file included from check.c:16:
check.c: In function ¡check_abs_references¢:
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:47:17: error: format ¡%lx¢ expects argument of type ¡long unsigned int¢, but argument 7 has type ¡u64¢ {aka ¡long
long unsigned int¢} [-Werror=format=]
47 | "%s%s%s: objtool" extra ": " format "\n", \
| ^~~~~~~~~~~~~~~~~
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:54:9: note: in expansion of macro ¡___WARN¢
54 | ___WARN(severity, "", format, ##__VA_ARGS__)
| ^~~~~~~
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:74:27: note: in expansion of macro ¡__WARN¢
74 | #define WARN(format, ...) __WARN(WARN_STR, format, ##__VA_ARGS__)
| ^~~~~~
check.c:4713:33: note: in expansion of macro ¡WARN¢
4713 | WARN("section %s has absolute relocation at offset 0x%lx",
| ^~~~
Fixes: 0d6e4563fc03 ("objtool: Add action to check for absence of absolute relocations")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/1ac32fff-2e67-5155-f570-69aad5bf5412@redhat.com
|
|
Between Rust 1.79 and 1.86, under `CONFIG_RUST_KERNEL_DOCTESTS=y`,
`objtool` may report:
rust/doctests_kernel_generated.o: warning: objtool:
rust_doctest_kernel_alloc_kbox_rs_13() falls through to next
function rust_doctest_kernel_alloc_kvec_rs_0()
(as well as in rust_doctest_kernel_alloc_kvec_rs_0) due to calls to the
`noreturn` symbol:
core::option::expect_failed
from code added in commits 779db37373a3 ("rust: alloc: kvec: implement
AsPageIter for VVec") and 671618432f46 ("rust: alloc: kbox: implement
AsPageIter for VBox").
Thus add the mangled one to the list so that `objtool` knows it is
actually `noreturn`.
This can be reproduced as well in other versions by tweaking the code,
such as the latest stable Rust (1.90.0).
Stable does not have code that triggers this, but it could have it in
the future. Downstream forks could too. Thus tag it for backport.
See commit 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later.
Link: https://patch.msgid.link/20251020020714.2511718-1-ojeda@kernel.org
|
|
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: c912f935a5c7 ("selftests: mptcp: join: validate new laminar endp")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-5-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-4-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: 36c4127ae8dd ("selftests: mptcp: join: skip implicit tests if not supported")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-3-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: e06959e9eebd ("selftests: mptcp: join: test for flush/re-add endpoints")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-2-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sctp_vrf.sh could fail:
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [FAIL]
not ok 1 selftests: net: sctp_vrf.sh # exit=3
The failure happens when the server bind in a new run conflicts with an
existing association from the previous run:
[1] ip netns exec $SERVER_NS ./sctp_hello server ...
[2] ip netns exec $CLIENT_NS ./sctp_hello client ...
[3] ip netns exec $SERVER_NS pkill sctp_hello ...
[4] ip netns exec $SERVER_NS ./sctp_hello server ...
It occurs if the client in [2] sends a message and closes immediately.
With the message unacked, no SHUTDOWN is sent. Killing the server in [3]
triggers a SHUTDOWN the client also ignores due to the unacked message,
leaving the old association alive. This causes the bind at [4] to fail
until the message is acked and the client responds to a second SHUTDOWN
after the server’s T2 timer expires (3s).
This patch fixes the issue by preventing the client from sending data.
Instead, the client blocks on recv() and waits for the server to close.
It also waits until both the server and the client sockets are fully
released in stop_server and wait_client before restarting.
Additionally, replace 2>&1 >/dev/null with -q in sysctl and grep, and
drop other redundant 2>&1 >/dev/null redirections, and fix a typo from
N to Y (connect successfully) in the description of the last test.
Fixes: a61bd7b9fef3 ("selftests: add a selftest for sctp vrf")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/be2dacf52d0917c4ba5e2e8c5a9cb640740ad2b6.1760731574.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ioctl returns 0 upon success, so !0 returning -1 breaks the selftest.
Drop the '!' to fix it.
Fixes: 1d235d849425 ("iommu/selftest: prevent use of uninitialized variable")
Link: https://patch.msgid.link/r/20251014214847.1113759-1-nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix seqcount lockdep assertion failure in cgroup freezer on
PREEMPT_RT.
Plain seqcount_t expects preemption disabled, but PREEMPT_RT
spinlocks don't disable preemption. Switch to seqcount_spinlock_t to
properly associate css_set_lock with the freeze timing seqcount.
- Misc changes including kernel-doc warning fix for misc_res_type enum
and improved selftest diagnostics.
* tag 'cgroup-for-6.18-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/misc: fix misc_res_type kernel-doc warning
selftests: cgroup: Use values_close_report in test_cpu
selftests: cgroup: add values_close_report helper
cgroup: Fix seqcount lockdep assertion in cgroup freezer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for sticky fingers handling in hid-multitouch (Benjamin
Tissoires)
- fix for reporting of 0 battery levels (Dmitry Torokhov)
- build fix for hid-haptic in certain configurations (Jonathan Denose)
- improved probe and avoiding spamming kernel log by hid-nintendo
(Vicki Pfau)
- fix for OOB in hid-cp2112 (Deepak Sharma)
- interrupt handling fix for intel-thc-hid (Even Xu)
- a couple of new device IDs and device-specific quirks
* tag 'hid-for-linus-2025101701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: Add HIDPP_QUIRK_RESET_HI_RES_SCROLL
selftests/hid: add tests for missing release on the Dell Synaptics
HID: multitouch: fix sticky fingers
HID: multitouch: fix name of Stylus input devices
HID: hid-input: only ignore 0 battery events for digitizers
HID: hid-debug: Fix spelling mistake "Rechargable" -> "Rechargeable"
HID: Kconfig: Fix build error from CONFIG_HID_HAPTIC
HID: nintendo: Rate limit IMU compensation message
HID: nintendo: Wait longer for initial probe
HID: core: Add printk_ratelimited variants to hid_warn() etc
HID: quirks: Add ALWAYS_POLL quirk for VRS R295 steering wheel
HID: quirks: avoid Cooler Master MM712 dongle wakeup bug
HID: cp2112: Add parameter validation to data length
HID: intel-thc-hid: intel-quickspi: Add ARL PCI Device Id's
HID: intel-thc-hid: Intel-quickspi: switch first interrupt from level to edge detection
HID: intel-thc-hid: intel-quicki2c: Fix wrong type casting
|
|
Pull bpf fixes from Alexei Starovoitov:
- Replace bpf_map_kmalloc_node() with kmalloc_nolock() to fix kmemleak
imbalance in tracking of bpf_async_cb structures (Alexei Starovoitov)
- Make selftests/bpf arg_parsing.c more robust to errors (Andrii
Nakryiko)
- Fix redefinition of 'off' as different kind of symbol when I40E
driver is builtin (Brahmajit Das)
- Do not disable preemption in bpf_test_run (Sahil Chandna)
- Fix memory leak in __lookup_instance error path (Shardul Bankar)
- Ensure test data is flushed to disk before reading it (Xing Guo)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix redefinition of 'off' as different kind of symbol
bpf: Do not disable preemption in bpf_test_run().
bpf: Fix memory leak in __lookup_instance error path
selftests: arg_parsing: Ensure data is flushed to disk before reading.
bpf: Replace bpf_map_kmalloc_node() with kmalloc_nolock() to allocate bpf_async_cb structures.
selftests/bpf: make arg_parsing.c more robust to crashes
bpf: test_run: Fix ctx leak in bpf_prog_test_run_xdp error path
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of ZCR_EL2 in NV VMs
- Pick the correct translation regime when doing a PTW on the back of
a SEA
- Prevent userspace from injecting an event into a vcpu that isn't
initialised yet
- Move timer save/restore to the sysreg handling code, fixing EL2
timer access in the process
- Add FGT-based trapping of MDSCR_EL1 to reduce the overhead of debug
- Fix trapping configuration when the host isn't GICv3
- Improve the detection of HCR_EL2.E2H being RES1
- Drop a spurious 'break' statement in the S1 PTW
- Don't try to access SPE when owned by EL3
Documentation updates:
- Document the failure modes of event injection
- Document that a GICv3 guest can be created on a GICv5 host with
FEAT_GCIE_LEGACY
Selftest improvements:
- Add a selftest for the effective value of HCR_EL2.AMO
- Address build warning in the timer selftest when building with
clang
- Teach irqfd selftests about non-x86 architectures
- Add missing sysregs to the set_id_regs selftest
- Fix vcpu allocation in the vgic_lpi_stress selftest
- Correctly enable interrupts in the vgic_lpi_stress selftest
x86:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test
for the bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return
-EAGAIN if userspace deletes/moves memslot during prefault")
- Don't try to get PMU capabilities from perf when running a CPU with
hybrid CPUs/PMUs, as perf will rightly WARN.
guest_memfd:
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a
more generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to
explicitly set said flag to initialize memory as SHARED,
irrespective of MMAP.
The behavior merged in 6.18 is that enabling mmap() implicitly
initializes memory as SHARED, which would result in an ABI
collision for x86 CoCo VMs as their memory is currently always
initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with
private memory, to enable testing such setups, i.e. to hopefully
flush out any other lurking ABI issues before 6.18 is officially
released.
- Add testcases to the guest_memfd selftest to cover guest_memfd
without MMAP, and host userspace accesses to mmap()'d private
memory"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
arm64: Revamp HCR_EL2.E2H RES1 detection
KVM: arm64: nv: Use FGT write trap of MDSCR_EL1 when available
KVM: arm64: Compute per-vCPU FGTs at vcpu_load()
KVM: arm64: selftests: Fix misleading comment about virtual timer encoding
KVM: arm64: selftests: Add an E2H=0-specific configuration to get_reg_list
KVM: arm64: selftests: Make dependencies on VHE-specific registers explicit
KVM: arm64: Kill leftovers of ad-hoc timer userspace access
KVM: arm64: Fix WFxT handling of nested virt
KVM: arm64: Move CNT*CT_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CVAL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CTL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Add timer UAPI workaround to sysreg infrastructure
KVM: arm64: Make timer_set_offset() generally accessible
KVM: arm64: Replace timer context vcpu pointer with timer_id
KVM: arm64: Introduce timer_context_to_vcpu() helper
KVM: arm64: Hide CNTHV_*_EL2 from userspace for nVHE guests
Documentation: KVM: Update GICv3 docs for GICv5 hosts
KVM: arm64: gic-v3: Only set ICH_HCR traps for v2-on-v3 or v3 guests
KVM: arm64: selftests: Actually enable IRQs in vgic_lpi_stress
KVM: arm64: selftests: Allocate vcpus with correct size
...
|
|
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
|
|
This fixes the following build error
CLNG-BPF [test_progs] verifier_global_ptr_args.bpf.o
progs/verifier_global_ptr_args.c:228:5: error: redefinition of 'off' as
different kind of symbol
228 | u32 off;
| ^
The symbol 'off' was previously defined in
tools/testing/selftests/bpf/tools/include/vmlinux.h, which includes an
enum i40e_ptp_gpio_pin_state from
drivers/net/ethernet/intel/i40e/i40e_ptp.c:
enum i40e_ptp_gpio_pin_state {
end = -2,
invalid = -1,
off = 0,
in_A = 1,
in_B = 2,
out_A = 3,
out_B = 4,
};
This enum is included when CONFIG_I40E is enabled. As of commit
032676ff8217 ("LoongArch: Update Loongson-3 default config file"),
CONFIG_I40E is set in the defconfig, which leads to the conflict.
Renaming the local variable avoids the redefinition and allows the
build to succeed.
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251017171551.53142-1-listout@listout.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN
Current release - regressions:
- udp: do not use skb_release_head_state() before
skb_attempt_defer_free()
- gro_cells: use nested-BH locking for gro_cell
- dpll: zl3073x: increase maximum size of flash utility
Previous releases - regressions:
- core: fix lockdep splat on device unregister
- tcp: fix tcp_tso_should_defer() vs large RTT
- tls:
- don't rely on tx_work during send()
- wait for pending async decryptions if tls_strp_msg_hold fails
- can: j1939: add missing calls in NETDEV_UNREGISTER notification
handler
- eth: lan78xx: fix lost EEPROM write timeout in
lan78xx_write_raw_eeprom
Previous releases - always broken:
- ip6_tunnel: prevent perpetual tunnel growth
- dpll: zl3073x: handle missing or corrupted flash configuration
- can: m_can: fix pm_runtime and CAN state handling
- eth:
- ixgbe: fix too early devlink_free() in ixgbe_remove()
- ixgbevf: fix mailbox API compatibility
- gve: Check valid ts bit on RX descriptor before hw timestamping
- idpf: cleanup remaining SKBs in PTP flows
- r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H"
* tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
netdevsim: set the carrier when the device goes up
selftests: tls: add test for short splice due to full skmsg
selftests: net: tls: add tests for cmsg vs MSG_MORE
tls: don't rely on tx_work during send()
tls: wait for pending async decryptions if tls_strp_msg_hold fails
tls: always set record_type in tls_process_cmsg
tls: wait for async encrypt in case of error during latter iterations of sendmsg
tls: trim encrypted message to match the plaintext on short splice
tg3: prevent use of uninitialized remote_adv and local_adv variables
MAINTAINERS: new entry for IPv6 IOAM
gve: Check valid ts bit on RX descriptor before hw timestamping
net: core: fix lockdep splat on device unregister
MAINTAINERS: add myself as maintainer for b53
selftests: net: check jq command is supported
net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
tcp: fix tcp_tso_should_defer() vs large RTT
r8152: add error handling in rtl8152_driver_init
usbnet: Fix using smp_processor_id() in preemptible code warnings
...
|
|
test_parse_test_list_file writes some data to
/tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
the data back. However, after writing data to that file, we forget to
call fsync() and it's causing testing failure in my laptop. This patch
helps fix it by adding the missing fsync() call.
Fixes: 64276f01dce8 ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Xing Guo <higuoxing@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251016035330.3217145-1-higuoxing@gmail.com
|
|
We don't have a test triggering a partial splice caused by a full
skmsg. Add one, based on a program by Jann Horn.
Use MAX_FRAGS=48 to make sure the skmsg will be full for any allowed
value of CONFIG_MAX_SKB_FRAGS (17..45).
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/1d129a15f526ea3602f3a2b368aa0b6f7e0d35d5.1760432043.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We don't have a test to check that MSG_MORE won't let us merge records
of different types across sendmsg calls.
Add new tests that check:
- MSG_MORE is only allowed for DATA records
- a pending DATA record gets closed and pushed before a non-DATA
record is processed
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/b34feeadefe8a997f068d5ed5617afd0072df3c0.1760432043.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a simple test for the corner case not currently covered by the
sticky fingers quirk. Because it's a corner case test, we only test this
on a couple of devices, not on all of them because the value of adding
the same test over and over is rather moot.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Convert test_cpu to use the newly added values_close_report() helper
to print detailed diagnostics when a tolerance check fails. This
provides clearer insight into deviations while run in the CI.
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Some cgroup selftests, such as test_cpu, occasionally fail by a very
small margin and if run in the CI context, it is useful to have detailed
diagnostic output to understand the deviation.
Introduce a values_close_report() helper which performs the same
comparison as values_close(), but prints detailed information when the
values differ beyond the allowed tolerance.
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
We started getting a crash in BPF CI, which seems to originate from
test_parse_test_list_file() test and is happening at this line:
ASSERT_OK(strcmp("test_with_spaces", set.tests[0].name), "test 0 name");
One way we can crash there is if set.cnt zero, which is checked for with
ASSERT_EQ() above, but we proceed after this regardless of the outcome.
Instead of crashing, we should bail out with test failure early.
Similarly, if parse_test_list_file() fails, we shouldn't be even looking
at set, so bail even earlier if ASSERT_OK() fails.
Fixes: 64276f01dce8 ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20251014202037.72922-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The jq command is used in vlan_bridge_binding.sh, if it is not supported,
the test will spam the following log.
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# TEST: Test bridge_binding on->off when lower down [FAIL]
# Got operstate of , expected 0
The rtnetlink.sh has the same problem. It makes sense to check if jq is
installed before running these tests. After this patch, the
vlan_bridge_binding.sh skipped if jq is not supported:
# timeout set to 3600
# selftests: net: vlan_bridge_binding.sh
# TEST: jq not installed [SKIP]
Fixes: dca12e9ab760 ("selftests: net: Add a VLAN bridge binding selftest")
Fixes: 6a414fd77f61 ("selftests: rtnetlink: Add an address proto test")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251013080039.3035898-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The userspace-visible encoding for CNTV_CVAL_EL0 and CNTVCNT_EL0
have been swapped for as long as usersapce has had access to the
registers. This is documented in arch/arm64/include/uapi/asm/kvm.h.
Despite that, the get_reg_list test has unhelpful comments indicating
the wrong register for the encoding.
Replace this with definitions exposed in the include file, and
a comment explaining again the brokenness.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add yet another configuration, this time dealing E2H=0.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The hyp virtual timer registers only exist when VHE is present,
Similarly, VNCR_EL2 only exists when NV2 is present.
Make these dependencies explicit.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
vgic_lpi_stress rather hilariously leaves IRQs disabled for the duration
of the test. While the ITS translation of MSIs happens regardless of
this, for completeness the guest should actually handle the LPIs.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
vcpus array contains pointers to struct kvm_vcpu {}. It is way overkill
to allocate the array with (nr_cpus * sizeof(struct kvm_vcpu)). Fix the
allocation by using the correct size.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We forgot to sync several registers (ID_AA64PFR1, MPIDR, CLIDR) in guest to
make sure that the guest had seen the written value.
Add them to the list.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-By: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The KVM_IRQFD ioctl fails if no irqchip is present in-kernel, which
isn't too surprising as there's not much KVM can do for an IRQ if it
cannot resolve a destination.
As written the irqfd_test assumes that a 'default' VM created in
selftests has an in-kernel irqchip created implicitly. That may be the
case on x86 but it isn't necessarily true on other architectures.
Add an arch predicate indicating if 'default' VMs get an irqchip and
make the irqfd_test depend on it. Work around arm64 VGIC initialization
requirements by using vm_create_with_one_vcpu(), ignoring the created
vCPU as it isn't used for the test.
Reported-by: Sebastian Ott <sebott@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Fixes: 7e9b231c402a ("KVM: selftests: Add a KVM_IRQFD test to verify uniqueness requirements")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Store the width of arm64's timer counter as an "int", not a "uint64_t".
ilog2() returns an "int", and more importantly using what is an "unsigned
long" under the hood makes clang unhappy due to a type mismatch when
clamping the width to a sane value.
arm64/arch_timer_edge_cases.c:1032:10: error: comparison of distinct pointer types
('typeof (width) *' (aka 'unsigned long *') and 'typeof (56) *' (aka 'int *'))
[-Werror,-Wcompare-distinct-pointer-types]
1032 | width = clamp(width, 56, 64);
| ^~~~~~~~~~~~~~~~~~~~
tools/include/linux/kernel.h:47:45: note: expanded from macro 'clamp'
47 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~~~~~~~~~~
tools/include/linux/kernel.h:33:17: note: expanded from macro 'max'
33 | (void) (&_max1 == &_max2); \
| ~~~~~~ ^ ~~~~~~
tools/include/linux/kernel.h:39:9: note: expanded from macro 'min'
39 | typeof(x) _min1 = (x); \
| ^
Fixes: fad4cf944839 ("KVM: arm64: selftests: Determine effective counter width in arch_timer_edge_cases")
Cc: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
A defect against the architecture now allows an implementation to treat
AMO as 1 when HCR_EL2.{E2H, TGE} = {1, 0}. KVM now takes advantage of
this interpretation to address a quality of emulation issue w.r.t.
SError injection.
Add a corresponding test case and expect a pending SError to be taken.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Convert remaining __init__ files similar to what we did in
commit b615879dbfea ("selftests: drv-net: make linters happy with our imports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- Simplify inline asm flag output operands now that the minimum
compiler version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support
for various instruction mnemonics now that the minimum assembler
version supports them all
- The usual cleanups all over the place
* tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove code depending on __GCC_ASM_FLAG_OUTPUTS__
x86/sgx: Use ENCLS mnemonic in <kernel/cpu/sgx/encls.h>
x86/mtrr: Remove license boilerplate text with bad FSF address
x86/asm: Use RDPKRU and WRPKRU mnemonics in <asm/special_insns.h>
x86/idle: Use MONITORX and MWAITX mnemonics in <asm/mwait.h>
x86/entry/fred: Push __KERNEL_CS directly
x86/kconfig: Remove CONFIG_AS_AVX512
crypto: x86 - Remove CONFIG_AS_VPCLMULQDQ
crypto: X86 - Remove CONFIG_AS_VAES
crypto: x86 - Remove CONFIG_AS_GFNI
x86/kconfig: Drop unused and needless config X86_64_SMP
|
|
Pull bpf fixes from Alexei Starovoitov:
- Finish constification of 1st parameter of bpf_d_path() (Rong Tao)
- Harden userspace-supplied xdp_desc validation (Alexander Lobakin)
- Fix metadata_dst leak in __bpf_redirect_neigh_v{4,6}() (Daniel
Borkmann)
- Fix undefined behavior in {get,put}_unaligned_be32() (Eric Biggers)
- Use correct context to unpin bpf hash map with special types (KaFai
Wan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add test for unpinning htab with internal timer struct
bpf: Avoid RCU context warning when unpinning htab with internal structs
xsk: Harden userspace-supplied xdp_desc validation
bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6}
libbpf: Fix undefined behavior in {get,put}_unaligned_be32()
bpf: Finish constification of 1st parameter of bpf_d_path()
|
|
Expand the guest_memfd negative testcases for overflow and MAP_PRIVATE to
verify that reads to inaccessible memory also get a SIGBUS.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Lisa Wang <wyihan@google.com>
Tested-by: Lisa Wang <wyihan@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a guest_memfd testcase to verify that faulting in private memory gets
a SIGBUS. For now, test only the case where memory is private by default
since KVM doesn't yet support in-place conversion.
Deliberately run the CoW test with and without INIT_SHARED set as KVM
should disallow MAP_PRIVATE regardless of whether the memory itself is
private from a CoCo perspective.
Cc: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extract the guest_memfd test's SIGBUS handling functionality into a common
TEST_EXPECT_SIGBUS() macro in anticipation of adding more SIGBUS testcases.
Eating a SIGBUS isn't terrible difficult, but it requires a non-trivial
amount of boilerplate code, and using a macro allows selftests to print
out the exact action that failed to generate a SIGBUS without the developer
needing to remember to add a useful error message.
Explicitly mark the SIGBUS handler as "used", as gcc-14 at least likes to
discard the function before linking.
Opportunistically use TEST_FAIL(...) instead of TEST_ASSERT(false, ...),
and fix the write path of the guest_memfd test to use the local "val"
instead of hardcoding the literal value a second time.
Suggested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Lisa Wang <wyihan@google.com>
Tested-by: Lisa Wang <wyihan@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the guest_memfd Copy-on-Write (CoW) testcase to its own function to
better separate positive testcases from negative testcases.
No functional change intended.
Suggested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add and use wrappers for mmap() and munmap() that assert success to reduce
a significant amount of boilerplate code, to ensure all tests assert on
failure, and to provide consistent error messages on failure.
No functional change intended.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
If a VM type supports KVM_CAP_GUEST_MEMFD_MMAP, the guest_memfd test will
run all test cases with GUEST_MEMFD_FLAG_MMAP set. This leaves the code
path for creating a non-mmap()-able guest_memfd on a VM that supports
mappable guest memfds untested.
Refactor the test to run the main test suite with a given set of flags.
Then, for VM types that support the mappable capability, invoke the test
suite twice: once with no flags, and once with GUEST_MEMFD_FLAG_MMAP
set.
This ensures both creation paths are properly exercised on capable VMs.
Run test_guest_memfd_flags() only once per VM type since it depends only
on the set of valid/supported flags, i.e. iterating over an arbitrary set
of flags is both unnecessary and wrong.
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
[sean: use double-underscores for the inner helper]
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Refactor the guest_memfd selftest to improve test isolation by creating a
a new guest_memfd for each testcase. Currently, the test reuses a single
guest_memfd instance for all testcases, and thus creates dependencies
between tests, e.g. not truncating folios from the guest_memfd instance
at the end of a test could lead to unexpected results (see the PUNCH_HOLE
purging that needs to done by in-flight the NUMA testcases[1]).
Invoke each test via a macro wrapper to create and close a guest_memfd
to cut down on the boilerplate copy+paste needed to create a test.
Link: https://lore.kernel.org/all/20250827175247.83322-10-shivankg@amd.com
Reported-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use a global variable to track the host page size in the guest_memfd test
so that the information doesn't need to be constantly passed around. The
state is purely a reflection of the underlying system, i.e. can't be set
by the test and is constant for a given invocation of the test, and thus
explicitly passing the host page size to individual testcases adds no
value, e.g. doesn't allow testing different combinations.
Making page_size a global will simplify an upcoming change to create a new
guest_memfd instance per testcase.
No functional change intended.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a guest_memfd flag to allow userspace to state that the underlying
memory should be configured to be initialized as shared, and reject user
page faults if the guest_memfd instance's memory isn't shared. Because
KVM doesn't yet support in-place private<=>shared conversions, all
guest_memfd memory effectively follows the initial state.
Alternatively, KVM could deduce the initial state based on MMAP, which for
all intents and purposes is what KVM currently does. However, implicitly
deriving the default state based on MMAP will result in a messy ABI when
support for in-place conversions is added.
For x86 CoCo VMs, which don't yet support MMAP, memory is currently private
by default (otherwise the memory would be unusable). If MMAP implies
memory is shared by default, then the default state for CoCo VMs will vary
based on MMAP, and from userspace's perspective, will change when in-place
conversion support is added. I.e. to maintain guest<=>host ABI, userspace
would need to immediately convert all memory from shared=>private, which
is both ugly and inefficient. The inefficiency could be avoided by adding
a flag to state that memory is _private_ by default, irrespective of MMAP,
but that would lead to an equally messy and hard to document ABI.
Bite the bullet and immediately add a flag to control the default state so
that the effective behavior is explicit and straightforward.
Fixes: 3d3a04fad25a ("KVM: Allow and advertise support for host mmap() on guest_memfd files")
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rework the not-yet-released KVM_CAP_GUEST_MEMFD_MMAP into a more generic
KVM_CAP_GUEST_MEMFD_FLAGS capability so that adding new flags doesn't
require a new capability, and so that developers aren't tempted to bundle
multiple flags into a single capability.
Note, kvm_vm_ioctl_check_extension_generic() can only return a 32-bit
value, but that limitation can be easily circumvented by adding e.g.
KVM_CAP_GUEST_MEMFD_FLAGS2 in the unlikely event guest_memfd supports more
than 32 flags.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add test to verify that unpinning hash tables containing internal timer
structures does not trigger context warnings.
Each subtest (timer_prealloc and timer_no_prealloc) can trigger the
context warning when unpinning, but the warning cannot be triggered
twice within a short time interval (a HZ), which is expected behavior.
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251008102628.808045-3-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- mlx5: fix pre-2.40 binutils assembler error
Current release - new code bugs:
- net: psp: don't assume reply skbs will have a socket
- eth: fbnic: fix missing programming of the default descriptor
Previous releases - regressions:
- page_pool: fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches
- tcp:
- take care of zero tp->window_clamp in tcp_set_rcvlowat()
- don't call reqsk_fastopen_remove() in tcp_conn_request()
- eth:
- ice: release xa entry on adapter allocation failure
- usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Previous releases - always broken:
- netfilter: validate objref and objrefmap expressions
- sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce()
- eth:
- mlx4: prevent potential use after free in mlx4_en_do_uc_filter()
- mlx5: prevent tunnel mode conflicts between FDB and NIC IPsec tables
- ocelot: fix use-after-free caused by cyclic delayed work
Misc:
- add support for MediaTek PCIe 5G HP DRMR-H01"
* tag 'net-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: airoha: Fix loopback mode configuration for GDM2 port
selftests: drv-net: pp_alloc_fail: add necessary optoins to config
selftests: drv-net: pp_alloc_fail: lower traffic expectations
selftests: drv-net: fix linter warnings in pp_alloc_fail
eth: fbnic: fix reporting of alloc_failed qstats
selftests: drv-net: xdp: add test for interface level qstats
selftests: drv-net: xdp: rename netnl to ethnl
eth: fbnic: fix saving stats from XDP_TX rings on close
eth: fbnic: fix accounting of XDP packets
eth: fbnic: fix missing programming of the default descriptor
selftests: netfilter: query conntrack state to check for port clash resolution
selftests: netfilter: nft_fib.sh: fix spurious test failures
bridge: br_vlan_fill_forward_path_pvid: use br_vlan_group_rcu()
netfilter: nft_objref: validate objref and objrefmap expressions
net: pse-pd: tps23881: Fix current measurement scaling
net/mlx5: fix pre-2.40 binutils assembler error
net/mlx5e: Do not fail PSP init on missing caps
net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed
net/mlx5: Prevent tunnel mode conflicts between FDB and NIC IPsec tables
net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
...
|
|
Add kernel config for error injection as needed by pp_alloc_fail.py
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 9da271f825e4 ("selftests: drv-net-hw: add test for memory allocation failures with page pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-10-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Lower the expected level of traffic in the pp_alloc_fail test
and calculate failure counter thresholds based on the traffic
rather than using a fixed constant.
We only have "QEMU HW" in NIPA right now, and the test (due to
debug dependencies) only works on debug kernels in the first place.
We need some place for it to pass otherwise it seems to be bit
rotting. So lower the traffic threshold so that it passes on QEMU
and with a debug kernel...
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix linter warnings, it's a bit hard to check for new ones otherwise.
W0311: Bad indentation. Found 16 spaces, expected 12 (bad-indentation)
C0114: Missing module docstring (missing-module-docstring)
W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
C0116: Missing function or method docstring (missing-function-docstring)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-8-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Send a non-trivial number of packets and make sure that they
are counted correctly in qstats. Per qstats specification
XDP is the first layer of the stack so we should see Rx and Tx
counters go up for packets which went thru XDP.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-6-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Test uses "netnl" for the ethtool family which is quite confusing
(one would expect netdev family would use this name).
No functional changes.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-5-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Extended 'perf annotate' with DWARF type information
(--code-with-type) integration in the TUI, including a 'T'
hotkey to toggle it
- Enhanced 'perf bench mem' with new mmap() workloads and control
over page/chunk sizes
- Fix 'perf stat' error handling to correctly display unsupported
events
- Improved support for Clang cross-compilation
- Refactored LLVM and Capstone disasm for modularity
- Introduced the :X modifier to exclude an event from automatic
regrouping
- Adjusted KVM sampling defaults to use the "cycles" event to prevent
failures
- Added comprehensive support for decoding PowerPC Dispatch Trace Log
(DTL)
- Updated Arm SPE tracing logic for better analysis of memory and snoop
details
- Synchronized Intel PMU events and metrics with TMA 5.1 across
multiple processor generations
- Converted dependencies like libperl and libtracefs to be opt-in
- Handle more Rust symbols in kallsyms ('N', debugging)
- Improve the python binding to allow for python based tools to use
more of the libraries, add a 'ilist' utility to test those new
bindings
- Various 'perf test' fixes
- Kan Liang no longer a perf tools reviewer
* tag 'perf-tools-for-v6.18-1-2025-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (192 commits)
perf tools: Fix arm64 libjvmti build by generating unistd_64.h
perf tests: Don't retest sections in "Object code reading"
perf docs: Document building with Clang
perf build: Support build with clang
perf test coresight: Dismiss clang warning for unroll loop thread
perf test coresight: Dismiss clang warning for thread loop
perf test coresight: Dismiss clang warning for memcpy thread
perf build: Disable thread safety analysis for perl header
perf build: Correct CROSS_ARCH for clang
perf python: split Clang options when invoking Popen
tools build: Align warning options with perf
perf disasm: Remove unused evsel from 'struct annotate_args'
perf srcline: Fallback between addr2line implementations
perf disasm: Make ins__scnprintf() and ins__is_nop() static
perf dso: Clean up read_symbol() error handling
perf dso: Support BPF programs in dso__read_symbol()
perf dso: Move read_symbol() from llvm/capstone to dso
perf llvm: Reduce LLVM initialization
perf check: Add libLLVM feature
perf parse-events: Fix parsing of >30kb event strings
...
|
|
Jakub reported this self test flaking occasionally (fails, but passes on
re-run) on debug kernels.
This is because the test checks for elapsed time to determine if both
connections were established in parallel.
Rework this to no longer depend on timing.
Use busywait helper to check that both sockets have moved to established
state and then query the conntrack engine for the two entries.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netfilter-devel/20250926163318.40d1a502@kernel.org/
Fixes: 117e149e26d1 ("selftests: netfilter: test nat source port clash resolution interaction with tcp early demux")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Jakub reports spurious failure of nft_fib.sh test.
This is caused by a subtle bug inherited when i moved faulty ping
from one test case to another.
nft_fib.sh not only checks that the fib expression matched, it also
records the number of matches and then validates we have the expected
count. When I did this it was under the assumption that we would
have 0 to n matching packets. In case of the failure, the entry has
n+1 matching packets.
This happens because ping_unreachable helper uses "ping -c 1 -w 1",
instead of the intended "-W". -w alters the meaning of -c (count),
namely, its then treated as number of wanted *replies* instead of
"number of packets to send".
So, in some cases, ping -c 1 -w 1 ends up sending two packets which then
makes the test fail due to the higher-than-expected packet count.
Fix the actual bug (s/-w/-W) and also change the error handling:
1. Show the number of expected packets in the error message
2. Always try to delete the key from the set.
Else, later test that makes sure we don't have unexpected keys
in there will always fail as well.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netfilter-devel/20250927090709.0b3cd783@kernel.org/
Fixes: 98287045c979 ("selftests: netfilter: move fib vrf test to nft_fib.sh")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- tools headers: rename missed CONFIG_CFI_CLANG in merge (Carlos
Llamas)
- kconfig: Avoid prompting for transitional symbols
* tag 'hardening-fix1-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
tools headers: kcfi: rename missed CONFIG_CFI_CLANG
kconfig: Avoid prompting for transitional symbols
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"Fix RZ/G3E driver introduction fall-out (Geert Uytterhoeven) and
improve the compilation and installation of the thermal library for
user space (Emil Dahl Juhl and Sascha Hauer)"
* tag 'thermal-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools: lib: thermal: expose thermal_exit symbols
tools: lib: thermal: don't preserve owner in install
tools: lib: thermal: use pkg-config to locate libnl3
thermal: renesas: Fix RZ/G3E fall-out
|
|
Expand the prefault memory selftest to add a regression test for a KVM bug
where KVM's retry logic would result in (breakable) deadlock due to the
memslot deletion waiting on prefaulting to release SRCU, and prefaulting
waiting on the memslot to fully disappear (KVM uses a two-step process to
delete memslots, and KVM x86 retries page faults if a to-be-deleted, a.k.a.
INVALID, memslot is encountered).
To exercise concurrent memslot remove, spawn a second thread to initiate
memslot removal at roughly the same time as prefaulting. Test memslot
removal for all testcases, i.e. don't limit concurrent removal to only the
success case. There are essentially three prefault scenarios (so far)
that are of interest:
1. Success
2. ENOENT due to no memslot
3. EAGAIN due to INVALID memslot
For all intents and purposes, #1 and #2 are mutually exclusive, or rather,
easier to test via separate testcases since writing to non-existent memory
is trivial. But for #3, making it mutually exclusive with #1 _or_ #2 is
actually more complex than testing memslot removal for all scenarios. The
only requirement to let memslot removal coexist with other scenarios is a
way to guarantee a stable result, e.g. that the "no memslot" test observes
ENOENT, not EAGAIN, for the final checks.
So, rather than make memslot removal mutually exclusive with the ENOENT
scenario, simply restore the memslot and retry prefaulting. For the "no
memslot" case, KVM_PRE_FAULT_MEMORY should be idempotent, i.e. should
always fail with ENOENT regardless of how many times userspace attempts
prefaulting.
Pass in both the base GPA and the offset (instead of the "full" GPA) so
that the worker can recreate the memslot.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250924174255.2141847-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Commit 23ef9d439769 ("kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI")
missed one instance of CONFIG_CFI_CLANG. Rename it to match the original
kernel header. This addresses the following build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/cfi_types.h include/linux/cfi_types.h
Cc: Kees Cook <kees@kernel.org>
Fixes: a5ba183bdeee ("Merge tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20251006225148.1636486-1-cmllamas@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Linters are still not very happy with our __init__ files,
which was pointed out in recent review (see Link).
We have previously started importing things one by one to
make linters happy with the test files (which import from __init__).
But __init__ file itself still makes linters unhappy.
To clean it up I believe we must completely remove the wildcard
imports, and assign the imported modules to __all__.
hds.py needs to be fixed because it seems to be importing
the Python standard random from lib.net.
We can't use ksft_pr() / ktap_result() in case importing
from net.lib fails. Linters complain that those helpers
themselves may not have been imported.
Link: https://lore.kernel.org/9d215979-6c6d-4e9b-9cdd-39cff595866e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251003164748.860042-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull nfsd updates from Chuck Lever:
"Mike Snitzer has prototyped a mechanism for disabling I/O caching in
NFSD. This is introduced in v6.18 as an experimental feature. This
enables scaling NFSD in /both/ directions:
- NFS service can be supported on systems with small memory
footprints, such as low-cost cloud instances
- Large NFS workloads will be less likely to force the eviction of
server-local activity, helping it avoid thrashing
Jeff Layton contributed a number of fixes to the new attribute
delegation implementation (based on a pending Internet RFC) that we
hope will make attribute delegation reliable enough to enable by
default, as it is on the Linux NFS client.
The remaining patches in this pull request are clean-ups and minor
optimizations. Many thanks to the contributors, reviewers, testers,
and bug reporters who participated during the v6.18 NFSD development
cycle"
* tag 'nfsd-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (42 commits)
nfsd: discard nfserr_dropit
SUNRPC: Make RPCSEC_GSS_KRB5 select CRYPTO instead of depending on it
NFSD: Add io_cache_{read,write} controls to debugfs
NFSD: Do the grace period check in ->proc_layoutget
nfsd: delete unnecessary NULL check in __fh_verify()
NFSD: Allow layoutcommit during grace period
NFSD: Disallow layoutget during grace period
sunrpc: fix "occurence"->"occurrence"
nfsd: Don't force CRYPTO_LIB_SHA256 to be built-in
nfsd: nfserr_jukebox in nlm_fopen should lead to a retry
NFSD: Reduce DRC bucket size
NFSD: Delay adding new entries to LRU
SUNRPC: Move the svc_rpcb_cleanup() call sites
NFS: Remove rpcbind cleanup for NFSv4.0 callback
nfsd: unregister with rpcbind when deleting a transport
NFSD: Drop redundant conversion to bool
sunrpc: eliminate return pointer in svc_tcp_sendmsg()
sunrpc: fix pr_notice in svc_tcp_sendto() to show correct length
nfsd: decouple the xprtsec policy check from check_nfsd_access()
NFSD: Fix destination buffer size in nfsd4_ssc_setup_dul()
...
|
|
Since commit 22f72088ffe6 ("tools headers: Update the syscall table with
the kernel sources") the arm64 syscall header is generated at build
time. Later, commit bfb713ea53c7 ("perf tools: Fix arm64 build by
generating unistd_64.h") added a dependency to libperf to guarantee that
this header was created before building libperf or perf itself.
However, libjvmti also requires this header but does not depend on
libperf, leading to build failures such as:
In file included from /usr/include/sys/syscall.h:24,
from /usr/include/syscall.h:1,
from jvmti/jvmti_agent.c:36:
tools/arch/arm64/include/uapi/asm/unistd.h:2:10: fatal error: asm/unistd_64.h: No such file or directory
2 | #include <asm/unistd_64.h>
Fix this by ensuring that libperf is built before libjvmti, so that
unistd_64.h is always available.
Fixes: 22f72088ffe69a37 ("tools headers: Update the syscall table with the kernel sources")
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vincent Minet <v.minet@criteo.com>
Link: https://lore.kernel.org/r/20250922053702.2688374-1-v.minet@criteo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We get a significant number of conflicts between net and net-next
because of selftests Makefile changes. People tend to append new
test cases at the end of the Makefile when there's no clear sort
order. Sort all networking selftests Makefiles, use the following
format:
VAR_NAME := \
entry1 \
entry2 \
entry3 \
# end of VAR_NAME
Some Makefiles are already pretty close to this.
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251003210127.1021918-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sort config files for networking selftests. This should help us
avoid merge conflicts between net and net-next. patchwork check
will be added to prevent new issues.
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20251003205736.1019673-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We already only test each kcore map once, but on slow systems
(particularly with network filesystems) even the non-kcore maps are
slow.
The test can test the same objdump output over and over which only wastes
time. Generalize the skipping mechanism to track all DSOs and addresses
so that each section is only tested once.
On a fully loaded ARM Juno (simulating a parallel 'perf test' run) with
a network filesystem, the original runtime is:
real 1m51.126s
user 0m19.445s
sys 1m15.431s
And the new runtime is:
real 0m48.873s
user 0m8.031s
sys 0m32.353s
Committer testing:
# perf test "code read"
22: Object code reading : Ok
#
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add example commands for building perf with Clang.
Since recent Android NDK releases use Clang as the default compiler, a
separate Android specific document is no longer needed; point to the
general build documentation instead.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-9-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add support for building perf with clang. For cross compilation, the
Makefile dynamically selects target flag for corresponding arch.
This patch has been verified on x86_64 machine with Ubuntu distro, it
can build successfully for native target, and for cross building Arm64
and s390.
Example: native build on x86_64 / Ubuntu machine:
$ HOSTCC=clang CC=clang CXX=clang++ make -C tools/perf
Example: cross building s390 target on x86_64 / Ubuntu machine:
# Install x390x cross toolchain and headers
$ sudo apt-get install gcc-s390x-linux-gnu g++-s390x-linux-gnu \
libc6-dev-s390x-cross linux-libc-dev-s390x-cross
# Build with clang
$ HOSTCC=clang CC=clang CXX=clang++ \
ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- \
make -C tools/perf NO_LIBELF=1 NO_LIBTRACEEVENT=1 NO_LIBPYTHON=1
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-8-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
clang-18.1.3 on Ubuntu 24.04.2 reports warning:
unroll_loop_thread.c:35:25: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
35 | : /* in */ [in] "r" (in)
| ^
unroll_loop_thread.c:39:1: warning: non-void function does not return a value [-Wreturn-type]
39 | }
| ^
Use the modifier "w" for 32-bit register access and return NULL at the
end of thread function.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-7-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
clang-18.1.3 on Ubuntu 24.04.2 reports warning:
thread_loop.c:41:23: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:37:8: note: use constraint modifier "w"
37 | "add %[i], %[i], #1\n"
| ^~~~
| %w[i]
thread_loop.c:41:23: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:37:14: note: use constraint modifier "w"
37 | "add %[i], %[i], #1\n"
| ^~~~
| %w[i]
thread_loop.c:41:23: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:38:8: note: use constraint modifier "w"
38 | "cmp %[i], %[len]\n"
| ^~~~
| %w[i]
thread_loop.c:41:38: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:38:14: note: use constraint modifier "w"
38 | "cmp %[i], %[len]\n"
| ^~~~~~
| %w[len]
Use the modifier "w" for 32-bit register access.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-6-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
clang-18.1.3 on Ubuntu 24.04.2 reports warning:
memcpy_thread.c:30:1: warning: non-void function does not return a value in all control paths [-Wreturn-type]
30 | }
| ^
Dismiss the warning with returning NULL from the thread function.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-5-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When build with perl5, it reports error:
In file included from /usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/perl.h:7933:
/usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/inline.h:298:5: error:
mutex 'PL_env_mutex.lock' is not held on every path through
here [-Werror,-Wthread-safety-analysis]
298 | ENV_UNLOCK;
| ^
/usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/perl.h:7091:31: note:
expanded from macro 'ENV_UNLOCK'
7091 | # define ENV_UNLOCK PERL_REENTRANT_UNLOCK("env"...
| ^
/usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/perl.h:6465:7: note:
expanded from macro 'PERL_REENTRANT_UNLOCK'
6465 | } STMT_END
| ^
/usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/perl.h:865:28: note:
expanded from macro 'STMT_END'
865 | # define STMT_END while (0)
| ^
The error is caused by perl header but not perf code, disable thread
safety analysis if including the header.
Though GCC does not support the thread safety analysis option, this
negative warning flag is silently ignored by it.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-4-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Clang's -dumpmachine outputs "aarch64-unknown-linux-gnu", which does not
match the MultiArch convention. This prevents the build system from
detecting installed packages.
Fix by stripping the trailing '-' from CROSS_COMPILE when setting
CROSS_ARCH.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-3-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When passing a list to subprocess.Popen, each element maps to one argv
token. Current code bundles multiple Clang flags into a single element,
something like:
cmd = ['clang',
'--target=x86_64-linux-gnu -fintegrated-as -Wno-cast-function-type-mismatch',
'test-hello.c']
So Clang only sees one long, invalid option instead of separate flags,
as a result, the script cannot capture any log via PIPE.
Fix this by using shlex.split() to separate the string so each option
becomes its own argv element. The fixed list will be:
cmd = ['clang',
'--target=x86_64-linux-gnu',
'-fintegrated-as',
'-Wno-cast-function-type-mismatch',
'test-hello.c']
Fixes: 09e6f9f98370 ("perf python: Fix splitting CC into compiler and options")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-2-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The feature test programs are built without enabling '-Wall -Werror'
options. As a result, a feature may appear to be available, but later
building in perf can fail with stricter checks.
Make the feature test program use the same warning options as perf.
Fixes: 1925459b4d92 ("tools build: Fix feature Makefile issues with 'O='")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-1-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Set in symbol__annotate() but never used.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Factor the addr2line function implementation into separate source files
(addr2line.[ch]) and rename the addr2line function cmd__addr2line. In
srcline replace the ifdef-ed addr2line implementations with one that
first tries the llvm__addr2line implementation, then the deprecated
libbfd__addr2line function and on failure uses cmd__addr2line.
If HAVE_LIBLLVM_SUPPORT is enabled the llvm__addr2line will execute
against the libLLVM.so it is linked against.
If HAVE_LIBLLVM_DYNAMIC is enabled then libperf-llvm.so (that links
against libLLVM.so) will be dlopened. If the dlopen succeeds then the
behavior should match HAVE_LIBLLVM_SUPPORT. On failure cmd__addr2line is
used. The dlopen is only tried once.
If HAVE_LIBLLVM_DYNAMIC isn't enabled then llvm__addr2line immediately
fails and cmd__addr2line is used.
Clean up the dso__free_a2l logic, which is only needed in the non-LLVM
version and moved to addr2line.c.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull x86 kvm updates from Paolo Bonzini:
"Generic:
- Rework almost all of KVM's exports to expose symbols only to KVM's
x86 vendor modules (kvm-{amd,intel}.ko and PPC's kvm-{pr,hv}.ko
x86:
- Rework almost all of KVM x86's exports to expose symbols only to
KVM's vendor modules, i.e. to kvm-{amd,intel}.ko
- Add support for virtualizing Control-flow Enforcement Technology
(CET) on Intel (Shadow Stacks and Indirect Branch Tracking) and AMD
(Shadow Stacks).
It is worth noting that while SHSTK and IBT can be enabled
separately in CPUID, it is not really possible to virtualize them
separately. Therefore, Intel processors will really allow both
SHSTK and IBT under the hood if either is made visible in the
guest's CPUID. The alternative would be to intercept
XSAVES/XRSTORS, which is not feasible for performance reasons
- Fix a variety of fuzzing WARNs all caused by checking L1 intercepts
when completing userspace I/O. KVM has already committed to
allowing L2 to to perform I/O at that point
- Emulate PERF_CNTR_GLOBAL_STATUS_SET for PerfMonV2 guests, as the
MSR is supposed to exist for v2 PMUs
- Allow Centaur CPU leaves (base 0xC000_0000) for Zhaoxin CPUs
- Add support for the immediate forms of RDMSR and WRMSRNS, sans full
emulator support (KVM should never need to emulate the MSRs outside
of forced emulation and other contrived testing scenarios)
- Clean up the MSR APIs in preparation for CET and FRED
virtualization, as well as mediated vPMU support
- Clean up a pile of PMU code in anticipation of adding support for
mediated vPMUs
- Reject in-kernel IOAPIC/PIT for TDX VMs, as KVM can't obtain EOI
vmexits needed to faithfully emulate an I/O APIC for such guests
- Many cleanups and minor fixes
- Recover possible NX huge pages within the TDP MMU under read lock
to reduce guest jitter when restoring NX huge pages
- Return -EAGAIN during prefault if userspace concurrently
deletes/moves the relevant memslot, to fix an issue where
prefaulting could deadlock with the memslot update
x86 (AMD):
- Enable AVIC by default for Zen4+ if x2AVIC (and other prereqs) is
supported
- Require a minimum GHCB version of 2 when starting SEV-SNP guests
via KVM_SEV_INIT2 so that invalid GHCB versions result in immediate
errors instead of latent guest failures
- Add support for SEV-SNP's CipherText Hiding, an opt-in feature that
prevents unauthorized CPU accesses from reading the ciphertext of
SNP guest private memory, e.g. to attempt an offline attack. This
feature splits the shared SEV-ES/SEV-SNP ASID space into separate
ranges for SEV-ES and SEV-SNP guests, therefore a new module
parameter is needed to control the number of ASIDs that can be used
for VMs with CipherText Hiding vs. how many can be used to run
SEV-ES guests
- Add support for Secure TSC for SEV-SNP guests, which prevents the
untrusted host from tampering with the guest's TSC frequency, while
still allowing the the VMM to configure the guest's TSC frequency
prior to launch
- Validate the XCR0 provided by the guest (via the GHCB) to avoid
bugs resulting from bogus XCR0 values
- Save an SEV guest's policy if and only if LAUNCH_START fully
succeeds to avoid leaving behind stale state (thankfully not
consumed in KVM)
- Explicitly reject non-positive effective lengths during SNP's
LAUNCH_UPDATE instead of subtly relying on guest_memfd to deal with
them
- Reload the pre-VMRUN TSC_AUX on #VMEXIT for SEV-ES guests, not the
host's desired TSC_AUX, to fix a bug where KVM was keeping a
different vCPU's TSC_AUX in the host MSR until return to userspace
KVM (Intel):
- Preparation for FRED support
- Don't retry in TDX's anti-zero-step mitigation if the target
memslot is invalid, i.e. is being deleted or moved, to fix a
deadlock scenario similar to the aforementioned prefaulting case
- Misc bugfixes and minor cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (142 commits)
KVM: x86: Export KVM-internal symbols for sub-modules only
KVM: x86: Drop pointless exports of kvm_arch_xxx() hooks
KVM: x86: Move kvm_intr_is_single_vcpu() to lapic.c
KVM: Export KVM-internal symbols for sub-modules only
KVM: s390/vfio-ap: Use kvm_is_gpa_in_memslot() instead of open coded equivalent
KVM: VMX: Make CR4.CET a guest owned bit
KVM: selftests: Verify MSRs are (not) in save/restore list when (un)supported
KVM: selftests: Add coverage for KVM-defined registers in MSRs test
KVM: selftests: Add KVM_{G,S}ET_ONE_REG coverage to MSRs test
KVM: selftests: Extend MSRs test to validate vCPUs without supported features
KVM: selftests: Add support for MSR_IA32_{S,U}_CET to MSRs test
KVM: selftests: Add an MSR test to exercise guest/host and read/write
KVM: x86: Define AMD's #HV, #VC, and #SX exception vectors
KVM: x86: Define Control Protection Exception (#CP) vector
KVM: x86: Add human friendly formatting for #XM, and #VE
KVM: SVM: Enable shadow stack virtualization for SVM
KVM: SEV: Synchronize MSR_IA32_XSS from the GHCB when it's valid
KVM: SVM: Pass through shadow stack MSRs as appropriate
KVM: SVM: Update dump_vmcb with shadow stack save area additions
KVM: nSVM: Save/load CET Shadow Stack state to/from vmcb12/vmcb02
...
|
|
Reduce the scope of ins__scnprintf() and ins__is_nop() that aren't used
outside of disasm.c.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Ensure errno is set and return to caller for error handling.
Unusually for perf the value isn't negated as expected by
symbol__strerror_disassemble().
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Set the buffer to the code in the BPF linear info. This enables BPF
JIT code disassembly by LLVM and capstone.
Move the common but minimal disassmble_bpf_image call to
disassemble_objdump so that it is only called after falling back to the
objdump option.
Similarly move the disassmble_bpf function to disassemble_objdump and
rename to disassmble_bpf_libbfd to make it clearer that this support
relies on libbfd.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the read_symbol function to dso.h, make the return type const and
add a mutable out_buf out parameter.
In future changes this will allow a code pointer to be returned without
necessary allocating memory.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the 3 LLVM initialization routines to be called in a single
init_llvm function that has its own bool to avoid repeated
initialization.
Reduce the scope of triplet and avoid copying strings for x86.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
[ Move init_llvm() under HAVE_LIBLLVM_SUPPORT to fix the build ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Advertise when perf is built with the HAVE_LIBLLVM_SUPPORT option.
Committer testing:
$ perf -vv | grep LLVM
libLLVM: [ on ] # HAVE_LIBLLVM_SUPPORT
$
And the form to use in scripts, notably the tools/perf/tests/shell/
'perf test' ones:
$ perf check feature libllvm
libLLVM: [ on ] # HAVE_LIBLLVM_SUPPORT
$ perf check -q feature libllvm && echo LLVM is present
LLVM is present
$ perf check -q feature liballvm && echo ALLVM is present
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
"Primarily bug fixes. Dave introduced the usage of cleanup.h a bit late
in the cycle to help with the new label work required within CXL [1]
nvdimm:
- Return -ENOMEM if devm_kcalloc() fails in ndtest_probe()
- Clean up __nd_ioctl() and remove gotos
- Remove duplicate linux/slab.h header
- Introduce guard() for nvdimm_bus_lock
- Use str_plural() to simplify the code
ACPI:
- NFIT: Fix incorrect ndr_desc being reportedin dev_err message"
Link: https://lore.kernel.org/all/20250917134116.1623730-1-s.neeraj@samsung.com/ [1]
* tag 'libnvdimm-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Remove duplicate linux/slab.h header
nvdimm: ndtest: Return -ENOMEM if devm_kcalloc() fails in ndtest_probe()
nvdimm: Clean up __nd_ioctl() and remove gotos
nvdimm: Introduce guard() for nvdimm_bus_lock
ACPI: NFIT: Fix incorrect ndr_desc being reportedin dev_err message
nvdimm: Use str_plural() to simplify the code
|
|
Fix functions that return undefined values. These issues were caught by
running clang using LLVM=1 option.
Clang warnings are as follows:
ovpn-cli.c:1587:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
1587 | if (!sock) {
| ^~~~~
ovpn-cli.c:1635:9: note: uninitialized use occurs here
1635 | return ret;
| ^~~
ovpn-cli.c:1587:2: note: remove the 'if' if its condition is always false
1587 | if (!sock) {
| ^~~~~~~~~~~~
1588 | fprintf(stderr, "cannot allocate netlink socket\n");
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1589 | goto err_free;
| ~~~~~~~~~~~~~~
1590 | }
| ~
ovpn-cli.c:1584:15: note: initialize the variable 'ret' to silence this warning
1584 | int mcid, ret;
| ^
| = 0
ovpn-cli.c:2107:7: warning: variable 'ret' is used uninitialized whenever switch case is taken [-Wsometimes-uninitialized]
2107 | case CMD_INVALID:
| ^~~~~~~~~~~
ovpn-cli.c:2111:9: note: uninitialized use occurs here
2111 | return ret;
| ^~~
ovpn-cli.c:1939:12: note: initialize the variable 'ret' to silence this warning
1939 | int n, ret;
| ^
|
Fixes: 959bc330a439 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Sidharth Seela <sidharthseela@gmail.com>
Link: https://patch.msgid.link/20251001123107.96244-2-sidharthseela@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
|
These violate aliasing rules and may be miscompiled unless
-fno-strict-aliasing is used. Replace them with the standard memcpy()
solution. Note that compilers know how to optimize this properly.
Fixes: 4a1c9e544b8d ("libbpf: remove linux/unaligned.h dependency for libbpf_sha256()")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20251006012037.159295-1-ebiggers@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt
- This is mostly just consolidating code between osnoise/timerlat and
top/hist for easier maintenance and less future divergence
* tag 'trace-tools-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rtla: Add remaining support for osnoise actions
tools/rtla: Add test engine support for unexpected output
tools/rtla: Fix -A option name in test comment
tools/rtla: Consolidate code between osnoise/timerlat and hist/top
tools/rtla: Create common_apply_config()
tools/rtla: Move top/hist params into common struct
tools/rtla: Consolidate common parameters into shared structure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions"
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.
All of these have been in linux-next for a while"
* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- haptic touchpad support (Angela Czubak and Jonathan Denose)
- support for audio jack handling on DualSense Playstation controllers
(Cristian Ciocaltea)
- allow HID-BPF to rebind a driver to hid-multitouch (Benjamin
Tissoires)
- rework hidraw ioctls to make them safer (and tested) (Benjamin
Tissoires)
- various PIDFF and universal-PIDFF fixes/improvements (Tomasz Pakuła)
- better configuration of Intel QuickI2C through ACPI (Xinpeng Sun)
- other assorted cleanups and fixes
* tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (58 commits)
HID: playstation: Switch to scoped_guard() in {dualsense|dualshock4}_output_worker()
HID: playstation: Silence sparse warnings for locking context imbalances
HID: playstation: Update SP preamp gain comment line
HID: intel-thc-hid: intel-quicki2c: support ACPI config for advanced features
HID: core: Change hid_driver to use a const char* for name
HID: hidraw: tighten ioctl command parsing
selftests/hid: hidraw: forge wrong ioctls and tests them
selftests/hid: hidraw: add more coverage for hidraw ioctls
selftests/hid: update vmtest.sh for virtme-ng
HID: playstation: Support DualSense audio jack event reporting
HID: playstation: Support DualSense audio jack hotplug detection
HID: playstation: Redefine DualSense input report status field
HID: playstation: Prefer kzalloc(sizeof(*buf)...)
HID: playstation: Document spinlock_t usage
HID: playstation: Fix all alignment and line length issues
HID: playstation: Correct spelling in comment sections
HID: playstation: Replace uint{32,16,8}_t with u{32,16,8}
HID: playstation: Simplify locking with guard() and scoped_guard()
HID: playstation: Add spaces around arithmetic operators
HID: playstation: Make use of bitfield macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"The changes include adding poison injection support, fixing CXL access
coordinates when onlining CXL memory, and delaing the enumeration of
downstream switch ports for CXL hierarchy to ensure that the CXL link
is established at the time of enumeration to address a few issues
observed on AMD and Intel platforms.
Misc changes:
- Use str_plural() instead of open code for emitting strings.
- Use str_enabled_disabled() instead of ternary operator
- Fix emit of type resource_size_t argument for
validate_region_offset()
- Typo fixup in CXL driver-api documentation
- Rename CFMWS coherency restriction defines
- Add convention doc describe dealing with x86 low memory hole
and CXL
Poison Inject support:
- Move hpa_to_spa callback to new reoot decoder ops structure
- Define a SPA to HPA callback for interleave calculation with
XOR math
- Add support for SPA to DPA address translation with XOR
- Add locked variants of poison inject and clear functions
- Add inject and clear poison support by region offset
CXL access coordinates update fix:
- A comment update for hotplug memory callback prority defines
- Add node_update_perf_attrs() for updating perf attrs on a node
- Update cxl_access_coordinates() to use the new node update function
- Remove hmat_update_target_coordinates() and related code
CXL delayed downstream port enumeration and initialization:
- Add helper to detect top of CXL device topology and remove
open coding
- Add helper to delete single dport
- Add a cached copy of target_map to cxl_decoder
- Refactor decoder setup to reduce cxl_test burden
- Defer dport allocation for switch ports
- Add mock version of devm_cxl_add_dport_by_dev() for cxl_test
- Adjust the mock version of devm_cxl_switch_port_decoders_setup()
due to cxl core usage
- Setup target_map for cxl_test decoder initialization
- Change SSLBIS handler to handle single dport
- Move port register setup to when first dport appears"
* tag 'cxl-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (25 commits)
cxl: Move port register setup to when first dport appear
cxl: Change sslbis handler to only handle single dport
cxl/test: Setup target_map for cxl_test decoder initialization
cxl/test: Adjust the mock version of devm_cxl_switch_port_decoders_setup()
cxl/test: Add mock version of devm_cxl_add_dport_by_dev()
cxl: Defer dport allocation for switch ports
cxl/test: Refactor decoder setup to reduce cxl_test burden
cxl: Add a cached copy of target_map to cxl_decoder
cxl: Add helper to delete dport
cxl: Add helper to detect top of CXL device topology
cxl: Documentation/driver-api/cxl: Describe the x86 Low Memory Hole solution
cxl/acpi: Rename CFMW coherency restrictions
Documentation/driver-api: Fix typo error in cxl
acpi/hmat: Remove now unused hmat_update_target_coordinates()
cxl, acpi/hmat: Update CXL access coordinates directly instead of through HMAT
drivers/base/node: Add a helper function node_update_perf_attrs()
mm/memory_hotplug: Update comment for hotplug memory callback priorities
cxl: Fix emit of type resource_size_t argument for validate_region_offset()
cxl/region: Add inject and clear poison by region offset
cxl/core: Add locked variants of the poison inject and clear funcs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Paul McKenney:
"Documentation updates:
- Update whatisRCU.rst and checklist.rst for recent RCU API additions
- Fix RCU documentation formatting and typos
- Replace dead Ottawa Linux Symposium links in RTFP.txt
Miscellaneous RCU updates:
- Document that rcu_barrier() hurries RCU_LAZY callbacks
- Remove redundant interrupt disabling from
rcu_preempt_deferred_qs_handler()
- Move list_for_each_rcu from list.h to rculist.h, and adjust the
include directive in kernel/cgroup/dmem.c accordingly
- Make initial set of changes to accommodate upcoming
system_percpu_wq changes
SRCU updates:
- Create an srcu_read_lock_fast_notrace() for eventual use in
tracing, including adding guards
- Document the reliance on per-CPU operations as implicit RCU readers
in __srcu_read_{,un}lock_fast()
- Document the srcu_flip() function's memory-barrier D's relationship
to SRCU-fast readers
- Remove a redundant preempt_disable() and preempt_enable() pair from
srcu_gp_start_if_needed()
Torture-test updates:
- Fix jitter.sh spin time so that it actually varies as advertised.
It is still quite coarse-grained, but at least it does now vary
- Update torture.sh help text to include the not-so-new --do-normal
parameter, which permits (for example) testing KCSAN kernels
without doing non-debug kernels
- Fix a number of false-positive diagnostics that were being
triggered by rcutorture starting before boot completed. Running
multiple near-CPU-bound rcutorture processes when there is only the
boot CPU is after all a bit excessive
- Substitute kcalloc() for kzalloc()
- Remove a redundant kfree() and NULL out kfree()ed objects"
* tag 'rcu.2025.09.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (31 commits)
rcu: WQ_UNBOUND added to sync_wq workqueue
rcu: WQ_PERCPU added to alloc_workqueue users
rcu: replace use of system_wq with system_percpu_wq
refperf: Set reader_tasks to NULL after kfree()
refperf: Remove redundant kfree() after torture_stop_kthread()
srcu/tiny: Remove preempt_disable/enable() in srcu_gp_start_if_needed()
srcu: Document srcu_flip() memory-barrier D relation to SRCU-fast
srcu: Document __srcu_read_{,un}lock_fast() implicit RCU readers
rculist: move list_for_each_rcu() to where it belongs
refscale: Use kcalloc() instead of kzalloc()
rcutorture: Use kcalloc() instead of kzalloc()
docs: rcu: Replace multiple dead OLS links in RTFP.txt
doc: Fix typo in RCU's torture.rst documentation
Documentation: RCU: Retitle toctree index
Documentation: RCU: Reduce toctree depth
Documentation: RCU: Wrap kvm-remote.sh rerun snippet in literal code block
rcu: docs: Requirements.rst: Abide by conventions of kernel documentation
doc: Add RCU guards to checklist.rst
doc: Update whatisRCU.rst for recent RCU API additions
rcutorture: Delay forward-progress testing until boot completes
...
|
|
The commit 1b8abbb12128 ("bpf...d_path(): constify path argument")
constified the first parameter of the bpf_d_path(), but failed to
update it in all places. Finish constification.
Otherwise the selftest fail to build:
.../selftests/bpf/bpf_experimental.h:222:12: error: conflicting types for 'bpf_path_d_path'
222 | extern int bpf_path_d_path(const struct path *path, char *buf, size_t buf__sz) __ksym;
| ^
.../selftests/bpf/tools/include/vmlinux.h:153922:12: note: previous declaration is here
153922 | extern int bpf_path_d_path(struct path *path, char *buf, size_t buf__sz) __weak __ksym;
Fixes: 1b8abbb12128 ("bpf...d_path(): constify path argument")
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull kvm updates from Paolo Bonzini:
"This excludes the bulk of the x86 changes, which I will send
separately. They have two not complex but relatively unusual conflicts
so I will wait for other dust to settle.
guest_memfd:
- Add support for host userspace mapping of guest_memfd-backed memory
for VM types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE
(which isn't precisely the same thing as CoCo VMs, since x86's
SEV-MEM and SEV-ES have no way to detect private vs. shared).
This lays the groundwork for removal of guest memory from the
kernel direct map, as well as for limited mmap() for
guest_memfd-backed memory.
For more information see:
- commit a6ad54137af9 ("Merge branch 'guest-memfd-mmap' into HEAD")
- guest_memfd in Firecracker:
https://github.com/firecracker-microvm/firecracker/tree/feature/secret-hiding
- direct map removal:
https://lore.kernel.org/all/20250221160728.1584559-1-roypat@amazon.co.uk/
- mmap support:
https://lore.kernel.org/all/20250328153133.3504118-1-tabba@google.com/
ARM:
- Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
- Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
- Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
- Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This
will hopefully help debugging non-VHE setups.
- Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
- Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
- Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
- Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then
allows a bunch of features to be turned off, which helps cross-host
migration.
- Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
- Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
LoongArch:
- Detect page table walk feature on new hardware
- Add sign extension with kernel MMIO/IOCSR emulation
- Improve in-kernel IPI emulation
- Improve in-kernel PCH-PIC emulation
- Move kvm_iocsr tracepoint out of generic code
RISC-V:
- Added SBI FWFT extension for Guest/VM with misaligned delegation
and pointer masking PMLEN features
- Added ONE_REG interface for SBI FWFT extension
- Added Zicbop and bfloat16 extensions for Guest/VM
- Enabled more common KVM selftests for RISC-V
- Added SBI v3.0 PMU enhancements in KVM and perf driver
s390:
- Improve interrupt cpu for wakeup, in particular the heuristic to
decide which vCPU to deliver a floating interrupt to.
- Clear the PTE when discarding a swapped page because of CMMA; this
bug was introduced in 6.16 when refactoring gmap code.
x86 selftests:
- Add #DE coverage in the fastops test (the only exception that's
guest- triggerable in fastop-emulated instructions).
- Fix PMU selftests errors encountered on Granite Rapids (GNR),
Sierra Forest (SRF) and Clearwater Forest (CWF).
- Minor cleanups and improvements
x86 (guest side):
- For the legacy PCI hole (memory between TOLUD and 4GiB) to UC when
overriding guest MTRR for TDX/SNP to fix an issue where ACPI
auto-mapping could map devices as WB and prevent the device drivers
from mapping their devices with UC/UC-.
- Make kvm_async_pf_task_wake() a local static helper and remove its
export.
- Use native qspinlocks when running in a VM with dedicated
vCPU=>pCPU bindings even when PV_UNHALT is unsupported.
Generic:
- Remove a redundant __GFP_NOWARN from kvm_setup_async_pf() as
__GFP_NOWARN is now included in GFP_NOWAIT.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (178 commits)
KVM: s390: Fix to clear PTE when discarding a swapped page
KVM: arm64: selftests: Cover ID_AA64ISAR3_EL1 in set_id_regs
KVM: arm64: selftests: Remove a duplicate register listing in set_id_regs
KVM: arm64: selftests: Cope with arch silliness in EL2 selftest
KVM: arm64: selftests: Add basic test for running in VHE EL2
KVM: arm64: selftests: Enable EL2 by default
KVM: arm64: selftests: Initialize HCR_EL2
KVM: arm64: selftests: Use the vCPU attr for setting nr of PMU counters
KVM: arm64: selftests: Use hyp timer IRQs when test runs at EL2
KVM: arm64: selftests: Select SMCCC conduit based on current EL
KVM: arm64: selftests: Provide helper for getting default vCPU target
KVM: arm64: selftests: Alias EL1 registers to EL2 counterparts
KVM: arm64: selftests: Create a VGICv3 for 'default' VMs
KVM: arm64: selftests: Add unsanitised helpers for VGICv3 creation
KVM: arm64: selftests: Add helper to check for VGICv3 support
KVM: arm64: selftests: Initialize VGICv3 only once
KVM: arm64: selftests: Provide kvm_arch_vm_post_create() in library code
KVM: selftests: Add ex_str() to print human friendly name of exception vectors
selftests/kvm: remove stale TODO in xapic_state_test
KVM: selftests: Handle Intel Atom errata that leads to PMU event overcount
...
|
|
Pull VFIO updates from Alex Williamson:
- Use fdinfo to expose the sysfs path of a device represented by a vfio
device file (Alex Mastro)
- Mark vfio-fsl-mc, vfio-amba, and the reset functions for
vfio-platform for removal as these are either orphaned or believed to
be unused (Alex Williamson)
- Add reviewers for vfio-platform to save it from also being marked for
removal (Mostafa Saleh, Pranjal Shrivastava)
- VFIO selftests, including basic sanity testing and minimal userspace
drivers for testing against real hardware. This is also expected to
provide integration with KVM selftests for KVM-VFIO interfaces (David
Matlack, Josh Hilke)
- Fix drivers/cdx and vfio/cdx to build without CONFIG_GENERIC_MSI_IRQ
(Nipun Gupta)
- Fix reference leak in hisi_acc (Miaoqian Lin)
- Use consistent return for unsupported device feature (Alex Mastro)
- Unwind using the correct memory free callback in vfio/pds (Zilin
Guan)
- Use IRQ_DISABLE_LAZY flag to improve handling of pre-PCI2.3 INTx and
resolve stalled interrupt on ppc64 (Timothy Pearson)
- Enable GB300 in nvgrace-gpu vfio-pci variant driver (Tushar Dave)
- Misc:
- Drop unnecessary ternary conversion in vfio/pci (Xichao Zhao)
- Grammatical fix in nvgrace-gpu (Morduan Zang)
- Update Shameer's email address (Shameer Kolothum)
- Fix document build warning (Alex Williamson)
* tag 'vfio-v6.18-rc1' of https://github.com/awilliam/linux-vfio: (48 commits)
vfio/nvgrace-gpu: Add GB300 SKU to the devid table
vfio/pci: Fix INTx handling on legacy non-PCI 2.3 devices
vfio/pds: replace bitmap_free with vfree
vfio: return -ENOTTY for unsupported device feature
hisi_acc_vfio_pci: Fix reference leak in hisi_acc_vfio_debug_init
vfio/platform: Mark reset drivers for removal
vfio/amba: Mark for removal
MAINTAINERS: Add myself as VFIO-platform reviewer
MAINTAINERS: Add myself as VFIO-platform reviewer
docs: proc.rst: Fix VFIO Device title formatting
vfio: selftests: Fix .gitignore for already tracked files
vfio/cdx: update driver to build without CONFIG_GENERIC_MSI_IRQ
cdx: don't select CONFIG_GENERIC_MSI_IRQ
MAINTAINERS: Update Shameer Kolothum's email address
vfio: selftests: Add a script to help with running VFIO selftests
vfio: selftests: Make iommufd the default iommu_mode
vfio: selftests: Add iommufd mode
vfio: selftests: Add iommufd_compat_type1{,v2} modes
vfio: selftests: Add vfio_type1v2_mode
vfio: selftests: Replicate tests across all iommu_modes
...
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix selftests/bpf (typo, conflicts) and unbreak BPF CI (Jiri Olsa)
- Remove linux/unaligned.h dependency for libbpf_sha256 (Andrii
Nakryiko) and add a test (Eric Biggers)
- Reject negative offsets for ALU operations in the verifier (Yazhou
Tang) and add a test (Eduard Zingerman)
- Skip scalar adjustment for BPF_NEG operation if destination register
is a pointer (Brahmajit Das) and add a test (KaFai Wan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
libbpf: Fix missing #pragma in libbpf_utils.c
selftests/bpf: Add tests for rejection of ALU ops with negative offsets
selftests/bpf: Add test for libbpf_sha256()
bpf: Reject negative offsets for ALU ops
libbpf: remove linux/unaligned.h dependency for libbpf_sha256()
libbpf: move libbpf_sha256() implementation into libbpf_utils.c
libbpf: move libbpf_errstr() into libbpf_utils.c
libbpf: remove unused libbpf_strerror_r and STRERR_BUFSIZE
libbpf: make libbpf_errno.c into more generic libbpf_utils.c
selftests/bpf: Add test for BPF_NEG alu on CONST_PTR_TO_MAP
bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer
selftests/bpf: Fix realloc size in bpf_get_addrs
selftests/bpf: Fix typo in subtest_basic_usdt after merge conflict
selftests/bpf: Fix open-coded gettid syscall in uprobe syscall tests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Two minor fixes:
- Make the selftest work again on x86 platforms with iommus enabled
- Fix a compiler warning in the userspace kselftest"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Register iommufd mock devices with fwspec
iommu/selftest: prevent use of uninitialized variable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- Refactoring of DMA mapping API to physical addresses as the primary
interface instead of page+offset parameters
This gets much closer to Matthew Wilcox's long term wish for
struct-pageless IO to cacheable DRAM and is supporting memdesc
project which seeks to substantially transform how struct page works.
An advantage of this approach is the possibility of introducing
DMA_ATTR_MMIO, which covers existing 'dma_map_resource' flow in the
common paths, what in turn lets to use recently introduced
dma_iova_link() API to map PCI P2P MMIO without creating struct page
Developped by Leon Romanovsky and Jason Gunthorpe
- Minor clean-up by Petr Tesarik and Qianfeng Rong
* tag 'dma-mapping-6.18-2025-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
kmsan: fix missed kmsan_handle_dma() signature conversion
mm/hmm: properly take MMIO path
mm/hmm: migrate to physical address-based DMA mapping API
dma-mapping: export new dma_*map_phys() interface
xen: swiotlb: Open code map_resource callback
dma-mapping: implement DMA_ATTR_MMIO for dma_(un)map_page_attrs()
kmsan: convert kmsan_handle_dma to use physical addresses
dma-mapping: convert dma_direct_*map_page to be phys_addr_t based
iommu/dma: implement DMA_ATTR_MMIO for iommu_dma_(un)map_phys()
iommu/dma: rename iommu_dma_*map_page to iommu_dma_*map_phys
dma-mapping: rename trace_dma_*map_page to trace_dma_*map_phys
dma-debug: refactor to use physical addresses for page mapping
iommu/dma: implement DMA_ATTR_MMIO for dma_iova_link().
dma-mapping: introduce new DMA attribute to indicate MMIO memory
swiotlb: Remove redundant __GFP_NOWARN
dma-direct: clean up the logic in __dma_direct_alloc_pages()
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle in docsland, with changes all
over:
- Bring the kernel memory-model docs into the Sphinx build in the
"literal include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate
HTML redirects; this can be used on kernel.org (or any other site
hosting the rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink
protocol.
- A significant update of the maintainer's PGP guide.
... and a seemingly endless series of typo fixes, build-problem fixes,
etc"
* tag 'docs-6.18' of git://git.lwn.net/linux: (193 commits)
Documentation/features: Update feature lists for 6.17-rc7
docs: remove cdomain.py
Documentation/process: submitting-patches: fix typo in "were do"
docs: dev-tools/lkmm: Fix typo of missing file extension
Documentation: trace: histogram: Convert ftrace docs cross-reference
Documentation: trace: histogram-design: Wrap introductory note in note:: directive
Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram
Documentation: trace: histogram-design: Trim trailing vertices in diagram explanation text
Documentation: trace: histogram: Fix histogram trigger subsection number order
docs: driver-api: fix spelling of "buses".
Documentation: fbcon: Use admonition directives
Documentation: fbcon: Reindent 8th step of attach/detach/unload
Documentation: fbcon: Add boot options and attach/detach/unload section headings
docs: filesystems: sysfs: add remaining top level sysfs directory descriptions
docs: filesystems: sysfs: clarify symlink destinations in dev and bus/devices descriptions
docs: filesystems: sysfs: remove top level sysfs net directory
docs: maintainer: Fix ambiguous subheading formatting
docs: kdoc: a few more dump_typedef() tweaks
docs: kdoc: remove redundant comment stripping in dump_typedef()
docs: kdoc: remove some dead code in dump_typedef()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull file->f_path constification from Al Viro:
"Only one thing was modifying ->f_path of an opened file - acct(2).
Massaging that away and constifying a bunch of struct path * arguments
in functions that might be given &file->f_path ends up with the
situation where we can turn ->f_path into an anon union of const
struct path f_path and struct path __f_path, the latter modified only
in a few places in fs/{file_table,open,namei}.c, all for struct file
instances that are yet to be opened"
* tag 'pull-f_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (23 commits)
Have cc(1) catch attempts to modify ->f_path
kernel/acct.c: saner struct file treatment
configfs:get_target() - release path as soon as we grab configfs_item reference
apparmor/af_unix: constify struct path * arguments
ovl_is_real_file: constify realpath argument
ovl_sync_file(): constify path argument
ovl_lower_dir(): constify path argument
ovl_get_verity_digest(): constify path argument
ovl_validate_verity(): constify {meta,data}path arguments
ovl_ensure_verity_loaded(): constify datapath argument
ksmbd_vfs_set_init_posix_acl(): constify path argument
ksmbd_vfs_inherit_posix_acl(): constify path argument
ksmbd_vfs_kern_path_unlock(): constify path argument
ksmbd_vfs_path_lookup_locked(): root_share_path can be const struct path *
check_export(): constify path argument
export_operations->open(): constify path argument
rqst_exp_get_by_name(): constify path argument
nfs: constify path argument of __vfs_getattr()
bpf...d_path(): constify path argument
done_path_create(): constify path argument
...
|
|
Metrics may generate many particularly uncore event references. The
resulting event string may then be >32kb. The parse events lex is
using "%option reject" which stores backtracking state in a buffer
sized at roughtly 30kb. If the event string is larger than this then a
buffer overflow and typically a crash happens.
The need for "%option reject" was for BPF events which were removed in
commit 3d6dfae88917 ("perf parse-events: Remove BPF event
support"). As "%option reject" is both a memory and performance cost
let's remove it and fix the parsing case for event strings being over
~30kb.
Whilst cleaning up "%option reject" make the header files accurately
reflect functions used in the code and tidy up not requiring yywrap.
Measuring on the "PMU JSON event tests" a modest reduction of 0.41%
user time and 0.27% max resident size was observed. More importantly
this change fixes parsing large metrics and event strings.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Include event parsing and regression tests for auto counter reload
and ratio-to-prev event term.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Provide ratio-to-prev term which allows the user to
set the event sample period of two events corresponding
to a desired ratio.
If using on an Intel x86 platform with Auto Counter Reload support, also
set corresponding event's config2 attribute with a bitmask which
counters to reset and which counters to sample if the desired ratio is
met or exceeded.
On other platforms, only the sample period is affected by the
ratio-to-prev term.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The feature test is unnecessary as the LIBBPF_CURRENT_VERSION_GEQ(1,7)
macro can be used instead. The only use was in perf and this is now
removed.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The feature check guarded the -DHAVE_LIBBPF_STRINGS_SUPPORT is
unnecessary as it is sufficient and easier to use the
LIBBPF_CURRENT_VERSION_GEQ macro.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The disasm feature tests feature-disassembler-four-args and
feature-disassembler-init-styled link against libopcodes part of
binutils which is license incompatible (GPLv3) with perf. Moving these
tests out of the common config will help improve build time.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Added in commit cbefd24f0aee3a5d ("tools build: Add test to check if
slang.h is in /usr/include/slang/") this feature was to fix build
support on now unsupported versions of RHEL 5 and 6. As 6 years has
passed let's remove the workaround.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
TSR_KIND_POINTER only represents percpu pointers currently. Rename it to
TSR_KIND_PERCPU_POINTER so we can use the TSR_KIND_POINTER to represent
pointer to a type.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Zecheng Li <zecheng@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xu Liu <xliuprof@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For the sake of Intel topdown events commit 9eac5612da1c9102 ("perf
stat: Don't skip failing group events") changed 'perf stat' error
handling making it so that more errors were fatal and didn't report
"<not supported>" events. The change outside of topdown events was
unintentional.
The notion of "fatal" error handling was introduced in commit
e0e6a6ca3ac211cc ("perf stat: Factor out open error handling") and
refined in commits like commit cb5ef60067c11cc8 ("perf stat: Error out
unsupported group leader immediately") to be an approach for avoiding
later assertion failures in the code base.
This change fixes those issues and removes the notion of a fatal error
on an event. If all events fail to open then a fatal error occurs with
the previous fatal error message. This seems to best match the notion of
supported events and allowing some errors not to stop 'perf stat', while
allowing the truly fatal no event case to terminate the tool early.
The evsel->errored flag is only used in the stat code but always just
meaning !evsel->supported although there is a comment about it being
sticky. Force all evsels to be supported in evsel__init and then clear
this when evsel__open fails. When an event is tried the supported is
set to true again. This simplifies the notion of whether an evsel is
broken.
In the get_group_fd code, fail to get a group fd when the evsel isn't
supported. If the leader isn't supported then it is also expected that
there is no group_fd as the leader will have been skipped. Therefore
change the BUG_ON test to be on supported rather than skippable. This
corrects the assertion errors that were the reason for the previous
fatal error handling.
Fixes: 9eac5612da1c9102 ("perf stat: Don't skip failing group events")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lore.kernel.org/r/20251002220727.1889799-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
