From the course: AutoCAD: Electrical Toolset

Unlock the full course today

Join today to access over 24,900 courses taught by industry experts.

Adding rungs to ladders

Adding rungs to ladders - AutoCAD Electrical Tutorial

From the course: AutoCAD: Electrical Toolset

Start my 1-month free trial Buy for my team

Adding rungs to ladders

“

- [Instructor] We're staying in our DEMO10.dwg file, in our WD Demo project for this particular chapter. Now in the previous video, I showed you how to add ladders to an AutoCAD electrical tool set drawing. You can see them here on the screen. Now I'm going to zoom into the bottom of this ladder here. Can you see? It's gone to 295 with the numbering. I'm just going to double click on the wheel, to zoom extents again. I'm going to add another ladder now, so I'm going to go back up to the Schematic tab on the ribbon, into the Insert Wires Wire Numbers panel, and click on the fly out here and insert a ladder. Now I'm going to go back to the six with the width and the two with the spacing. So just fill those out accordingly. Now the reference, the good thing is, it remembers, and it goes to 300. Make sure that you index with that five though. So you've got that five spacing. Just allows for future planning that you've got a…

Contents